山东地区地壳速度与中强地震的关系

利用山东区域地震数字台网提供的数据,通过三维层析成像方法结合山东地质构造实际情况,对山东区域进行联合走时反演地壳速度结构,获得该区分辨率较高的三维速度结构图像。结果表明：不同深度上的速度分布反映出山东地区深部构造的某些重要信息,为进一步研究该区的活动构造及地震参数计算提供科学依据。在地壳速度结构与中强地震活动的关系上,再次显示出中强震多发生在速度结构高速单元与低速单元的过渡带附近,说明中强震的孕育与震源区周围介质的不均匀性有关。     

Upper mantle seismic anisotropy beneath a convergent boundary: SKS waveform modeling in central Tibet

This study used SKS waveforms from the International Deep Profiling of Tibet and the Himalayas (INDEPTH) III dataset and a new 2D method for modeling seismic waves in anisotropic media to construct an image of anisotropic structures beneath central Tibet. A preferred model revealed three-segment anisotropic structures in the upper mantle beneath the study region. Waveform modeling demonstrated that the anisotropy was mainly generated by the lithosphere but not the asthenosphere, and that an anisotropic model with a flatter axis of symmetry provides a more consistent interpretation of the observations than models having steeply dipping symmetry axes. A relatively low velocity zone may underlie or intermingle with the anisotropic structures in the northern portion of the region. Synthetic tests also indicate that variations in the elastic constants and depth extent of the anisotropy assumed by the calculations do not affect the general conclusions, although trade-offs exist among certain model parameters. The modeling results suggest that the complex seismic structures in central Tibet were associated with underthrusting of the Indian lithosphere beneath the Asian lithosphere; the inferred flat symmetry axis of the anisotropy was likely generated during this collision process. If this were not the case, the inherited anisotropy would exhibit a steeply dipping axis of symmetry, parallel to the direction of underthrusting.     

Diagenetic fluid evolution and water-rock interaction model of carbonate cements in sandstone: An example from the reservoir sandstone of the Fourth Member of the Xujiahe Formation of the Xiaoquan-Fenggu area,Sichuan Province,China

Carbonate cement is the most abundant cement type in the Fourth Member of the Xujiahe Formation in the Xiaoquan-Fenggu area of the West Sichuan Depression. Here we use a systematic analysis of carbonate cement petrology, mineralogy, carbon and oxygen isotope ratios and enclosure homogenization temperatures to study the precipitation mechanism, pore fluid evolution, and distribution of different types of carbonate cement in reservoir sand in the study area. Crystalline calcite has relatively heavy carbon and oxygen isotope ratios(δ13C = 2.14‰, δ18O = -5.77‰), and was precipitated early. It was precipitated directly from supersaturated alkaline fluid under normal temperature and pressure conditions. At the time of precipitation, the fluid oxygen isotope ratio was very light, mainly showing the characteristics of a mixed meteoric water-seawater fluid(δ18O = -3‰), which shows that the fluid during precipitation was influenced by both meteoric water and seawater. The calcite cement that fills in the secondary pores has relatively lighter carbon and oxygen isotope ratios(δ13C = -2.36‰, δ18O = -15.68‰). This cement was precipitated late, mainly during the Middle and Late Jurassic. An important material source for this carbonate cement was the feldspar corrosion process that involved organic matter. The Ca2+, Fe3+ and Mg2+ ions released by the clay mineral transformation process were also important source materials. Because of water-rock interactions during the burial process, the oxygen isotope ratio of the fluid significantly increased during precipitation, by about 3‰. The dolomite cements in calcarenaceous sandstone that was precipitated during the Middle Jurassic have heavier carbon and oxygen isotope ratios, which are similar to those of carbonate debris in the sandstone(δ13C = 1.93‰, δ18O = -6.11‰), demonstrating that the two are from the same source that had a heavier oxygen isotope ratio(δ18O of about 2.2‰). The differences in fluid oxygen isotope ratios during cement precipitation reflect the influences of different water-rock interaction systems or different water-rock interaction strengths. This is the main reason why the sandstone containing many rigid particles(lithic quartz sandstone) has a relatively negative carbon isotope ratio and why the precipitation fluid in calcarenaceous sandstone has a relatively heavier oxygen isotope ratio.     

双相多孔介质中体波传播特性影响参数研究

基于修正的Biot理论,通过数值计算分别研究了3种体波（P1、P2、S波）的波速和衰减与固体颗粒压缩性、频率、孔隙率、流体黏滞系数、动力渗透系数等参数之间的关系。分析结果表明：（1）P1、P2波的波速和衰减与固体颗粒压缩性之间近似呈线性变化关系,而S波则几乎保持不变,并通过定量比较发现,能否忽略固体颗粒压缩性的影响取决于固体骨架体变模量( )与固体颗粒体变模量( )的比值;（2）孔隙率对P1、S波波速的影响较为显著,并且预测当孔隙率接近于1.0时,P1、P2波之间发生相互转换;（3）3种体波的波速和衰减均随流体黏滞系数和动力渗透系数而变化,且在这两个参数下的变化规律基本相反;（4）3种体波的波速和衰减均随频率的增大而增大,其中,频率对P2波的影响较大。     

南海神狐水合物钻探区不同形态流体地震反射特征与水合物产出的关系

天然气水合物的分布在很大程度上受到含气流体运移的影响。南海北部陆坡区,尤其是珠江口盆地的白云凹陷,普遍存在流体渗漏的现象,暗示了水合物赋存的良好前景。神狐海域水合物钻探区内的高分辨率地震资料显示,区域内发育大量流体运移通道,在地震剖面上表现为不同形态的地震反射模糊带,根据其形态特征,可以划分为花冠状和穹顶状两大类模糊反射带。模糊反射带的存在意味着研究区内具有良好的含气流体运移条件,能够为甲烷气体的垂向运移提供通道。神狐海域水合物的钻探结果表明,水合物的分布与模糊反射带的分布范围具有良好的空间匹配关系,其中,花冠状地震反射模糊带侧翼部与中尺度正断层相连,促进了含气流体的侧向运移,顶部与可能的微裂隙相通,气体可向上运移至水合物稳定带,形成了水合物藏;而穹顶状地震反射模糊带顶部则通过疑似流体通道与海底沟通,这种结构极易形成气体逃逸而无法形成水合物。因此,不同形态特征的模糊反射带可能对水合物的分布具有一定的指示意义。     

大别造山带大陆深俯冲和折返过程中壳-幔相互作用信息--来自大理岩铅同位素的证据

对大别造山带不同产状大理岩的铅同位素研究表明,红安群王家店和双河大理岩分别经历过高压和超高压变质作用,具有较高的铅同位素变化范围和高的放射性成因铅,反映了上地壳铅同位素的特征;新店大理岩的铅同位素比值和变化范围很小,具有EM1型地幔铅同位素特征,表明有地幔铅同位素特征的记录;而位于剪切带的方高坪大理岩的铅同位素除了n(206Pb)/n(204Pb)值更高外,与新店大理岩的铅同位素特征相似,记录了放射性铅同位素的大量加入或丢失,导致本来具有与双河大理岩类似的铅同位素特征变得不明显.这些结果均表明大陆深俯冲及其折返过程对大理岩铅同位素组成的改造是相当复杂的.     

民乐-山丹6.1级地震前青海省内的地下流体特征

在2003年10月25日甘肃省民乐-山丹6．1级地震前,青海省境内6个台的地下流体测项和龙羊峡台的电磁波出现了显短临异常,对这6个地下流体测项和龙羊峡电磁波出现的异常特征进行了追踪分析和总结。     

陨石中林伍德石的形成条件对寻找地球产状林伍德石的启示

橄榄石高压多形林伍德石被认为是地幔过渡带的主要矿物。天然产状林伍德石主要在发生强烈冲击变质的球粒陨石冲击脉体中出现。目前还没有在地球岩石中发现林伍德石的报告。陨石冲击脉体的温度压力历史和矿物组合特征研究表明,林伍德石形成后,高压下淬火是使林伍德石不发生退变作用的重要条件。陨石中有利于林伍德石保存的淬火时间仅为数秒到十多秒。在地球上任何地质事件中,均难以实现在如此短的时问内使位于地幔过渡带的林伍德石被带往地球表层。寻找地球产状的林伍德石,关键是要在岩石和矿物中存在有利于林伍德石保存的条件,特别是当这些岩石和矿物仍处于高温的环境时。     

会泽铅锌矿床的成矿流体来源:来自水-岩反应的证据

系统地研究了脉石矿物方解石中流体包裹体特征及矿床的水-岩反应条件.研究结果表明,该矿床的形成与中低温热液与中高温热液的混合有关;成矿流体的H、O同位素组成在不同矿体中没有明显的差别,流体形成前曾存在流体的均一化作用;成矿流体的形成是地层循环水与变质水、岩浆水在流体储库中充分混合的结果.因此,成矿流体具有多源性.     

Mantle Branch Structure in the South-Central Segment of the Da Hinggan Mts.,Inner Mongolia and Its Ore-controlling Role

Abstract: Mantle branch structure is the third tectonic unit of multiple evolution of a mantle branch. It is not only the main mechanism of intercontinental orogeny, but also an important ore-forming and ore-control structure. Studies on geotectonic evolution, regional geological characteristics and ore-forming and ore-control structures have shown that since the Mesozoic the Da Hinggan Mts. region has entered a typical intercontinental orogenic stage, and it is closely related to mantle branch activities. The south-central segment of the Da Hinggan Mts. is a typical mantle branch structure and possesses obvious magmatic-metamorphic complexes in the core, detachment slip beds in the periphery and overlapped fault depression basins. Moreover, all of these are the principal factors leading to ore formation and ore control in the region. This paper also further explores the mechanism of mineralization in the south-central segment of the Da Hinggan, summaries the rules of mineralization, puts forward the models of mineralization and points out future ore-exploring orientation.