微量元素锰对底栖甲藻热带库里亚藻(Coolia tropicalis)生长及叶绿素荧光特性的影响

以热带库里亚藻(Coolia tropicalis)为研究对象, 在不同锰浓度(0、1、5、10、50μmol·L ^-1)的人工海水培养15d, 利用叶绿素荧光动力学技术研究了其生长和光合作用对不同锰环境的响应。结果表明: 1)比生长速率(μ)和最大相对电子传递速率(rETR_max)与锰浓度均呈指数关系且对锰胁迫具有相同程度的响应; 2)锰浓度至少大于1μmol·L ^-1才能维持热带库里亚藻正常的光合作用活性, 当锰浓度低于该浓度时, 光合作用活性(F_v/F_m)在6d后开始下降, 而单位反应中心吸收光能(ABS/RC)和热能耗散(DI₀/RC)升高; 两个反应中心之间的电子传递(φ_E0)及生长并未受影响, 表明此阶段锰缺乏只影响活性光反应中心数量并提高热耗散途径; 当锰缺乏延长至15d时, 胁迫作用显现(F₀上升)并且电子传递(φ_E0)和生长受到抑制, 这阶段锰缺乏使光反应中心关闭且电子传递受阻; 3)锰缺乏的修复损伤比(r/k)并未降低, 表明锰缺乏并未影响热带库里亚藻的光保护能力。     

Status of Satellite Orbit Determination and Time Synchronization Technology for Global Navigation Satellite Systems

In the form of satellite ephemerides and clock parameters, the space datum and system time information of one global navigation satellite system (GNSS) is transferred to users. With the continuous updating in the satellite payload such as the high-precision atomic clock, the monitoring and tracking technique such as the inter-satellite link, and in the data processing technique, the accuracy and real-time performance of the satellite ephemeris and clock error products are steadily improved. Starting from December 27th, 2018, the BeiDou Navigation System 3, or BDS-3, has provided the accurate and reliable basic positioning, navigation, and timing (PNT) service for the users in the countries within the “one belt and one road”. This paper has summarized the faced challenges of the precise orbit determination and time synchronization from the regional BDS-2 system to the BDS-3 global system, and the specific solutions at the control segment. In addition, this paper has compared the BDS with other GNSS systems in terms of technical characteristics. Finally, aiming at a higher accuracy and more reliable PNT service, the road map of precise orbit determination and time synchronization technique for the next generation navigation systems is discussed, which will provide a reference for developing the global navigation satellite systems with an even higher accuracy.     

模糊聚类定权法对SLR定轨精度的影响

针对卫星激光测距(satellite laser ranging,SLR)精密定轨过程中存在的测站观测数据合理定权问题,将一种改进的模糊聚类算法引入到SLR观测数据定权中。基于国际激光测距服务(International Laser Ranging Service,ILRS)提供的全球SLR测站性能报告,对测站进行近实时滑动分类定权,改变SLR数据处理中权重的经验或者随意性选取模式。经过LAGEOS1卫星2014年1月至2016年12月3年全球SLR实测数据处理的测试。结果表明,当考虑LAGEOS标准点总数、LAGEOS标准点RMS值以及LAGEOS标准点合格率这3项测站质量控制因素确定的测站权值能最大限度地提高卫星定轨精度和观测数据的使用效率,对参与计算的365个3d弧段数据,91.46%弧段精度得到提高,平均提高约3.7mm,且每个测站的定轨残差RMS也得到了降低。这对于正在迈向毫米级测量精度的SLR技术至关重要。     

北斗三号组网卫星数据质量分析及单系统定轨精度初步评估

选取2018-01-23起10 d内16个iGMAS测站观测数据,对北斗三号卫星的观测数据质量及BDS单系统精密定轨精度进行评估。初步结果表明,老信号B1I、B3I北斗三号卫星的信噪比略强于二号卫星,噪声与多路径基本相当,均在0.1 m量级,新卫星不存在星内多路径偏差。新信号B1C/L1/E1频点GPS信噪比最强,Galileo和BDS卫星相当,B2a/L5/E5a和B2b/E5b各系统基本相当;噪声及多路径方面,B1C/L1/E1频点GPS优于BDS、Galileo卫星0.1 m量级,B2a/L5/E5a和B2b/E5b各系统基本相当,均在0.1 m量级,新信号中北斗三号卫星星内多路径偏差基本消失。单系统精密定轨试验中,分别进行有/无GEO卫星策略、太阳光压模型ECOM 五/九参数策略的比较,并使用卫星激光测距数据进行独立检核。初步结果表明,有GEO卫星、ECOM五参数光压模型的定轨精度最好,C19号卫星7个重叠弧段的平均定轨精度在沿迹向、法向、径向的精度分别为32 cm、16 cm、8 cm,与试验卫星的定轨精度基本相当。     

基于低成本单频u-blox接收机的GPS/BDS定向性能分析

针对高精度GNSS定向应用场景,通过实验对比对低成本单频u-blox接收机的数据质量和解算精度。结果表明,u-blox接收机GPS、BDS观测值的信噪比略低于测量型接收机;伪距精度分别为0.91 m、0.56 m,相位精度分别为1.35 cm、1.20 cm。在静态观测环境下,u-blox的定向精度可以达到航向0.2°/m和俯仰0.4°/m;动态环境下解算结果稍差,但也可以达到航向0.3°/m和俯仰0.6°/m,略低于高成本测量型接收机单频数据的实时动态定向精度。     

GPS天线相位中心校正对GRACE卫星精密定轨的影响

使用GRACE卫星星载GPS观测数据,研究地面获取的先验PCV模型和利用残差法估计的在轨PCV模型对低轨卫星精密定轨的影响,并采用GFZ精密轨道对比和SLR检核手段对其进行评估。结果表明,使用先验PCV模型会降低GRACE卫星定轨精度,相反利用在轨PCV模型可以提高定轨精度,提升数量级可达mm级。     

局部大地水准面精化系统软件的设计与实现

给出了局部大地水准面精化系统的总体结构以及各分系统的详细设计与实现方法,开发了旨在对相关重力测量数据实现自动化处理的局部大地水准面精化系统工具软件,并应用于某区域实际大地水准面的精确计算。实践证明,该系统能有效提高相关数据的处理效率,有助于局部大地水准面精化过程的规范化。     

基于惯导/天文高精度定姿方法

研究了利用惯性导航系统与天文导航系统进行组合定姿的方法;构造了惯导/天文组合导航系统的状态方程和量测方程;采用卡尔曼滤波技术设计了惯导/天文组合定姿算法。设计飞行器的典型飞行轨迹,通过数学仿真对该算法的有效性进行了验证。结果表明,天文导航能够有效地补偿惯性导航因陀螺漂移带来的误差,非常适用于飞行器的高精度定姿。     

A constrained LAMBDA method for GPS attitude determination

An improved method to obtain fixed integer ambiguity in GPS attitude determination is presented. Known conditions are utilized as constraints to acquire attitude information when the float solution and its variance–covariance matrix are not accurate enough. The searching ellipsoidal region is first expanded to compensate for errors caused by the inaccurate float solution. Then the constraints are used to shrink the region to a proper size, which maintains the true integer ambiguity. Experimental results demonstrate that this scheme gives a fast search time and a higher success rate in determining the fixed integer ambiguity than the unconstrained method. The accuracy of attitude angles is also improved.

In-situ survey of nanomolar manganese in seawater using an autonomous underwater vehicle around a volcanic crater at Teishi Knoll,Sagami Bay,Japan

We present the results of a chemical survey at a submarine volcano, Teishi Knoll, obtained using a submersible in-situ Mn analyzer (GAMOS) mounted on an autonomous underwater vehicle (AUV) platform. During this survey, high-resolution data of dissolved Mn were obtained in three dimensions in nearly real time. The AUV enabled continuous detailed observations along a preprogrammed pathway, which could not have been performed with conventional CTD hydrocasts. During this observation, anomalously high dissolved Mn concentrations were obtained within the crater, corresponding to high water temperatures. The anomalies might be a hydrothermal signature due to volcanic activity from the crater.