富营养化湖泊蓝藻—芦苇碎屑堆积分解过程及其潜在的共代谢效应

为探究富营养化浅水湖泊所富集的有机物对湖泊碳循环和水质的影响,本研究构建微宇宙系统,模拟蓝藻和芦苇碎屑单独分解及混合分解过程.通过测定各组上覆水营养盐浓度、有机质含量及结构的变化,揭示富营养化湖泊藻草残体混合分解过程中养分和有机碳的释放特征.结果 表明,在实验0～88 h内,在添加相同的碳源条件下,蓝藻和芦苇混合处理组...     

胶州湾海水中悬浮颗粒对溶解态微量元素的影响

运用离子色谱离线螯合结合ICP-MS的方法,对胶州湾海水中的微量元素(V,Co,Ni,Cu,Mo,Cd,Pb,U,REEs)进行了精确的定量分析。在测试前对在同一站位不同层位采集的平行海水样品进行了两种不同的酸化处理:一份采取先过滤后酸化的方式,以获得海水中溶解态微量元素的含量;另一份采取直接酸化后分析的方式,以评估悬浮颗粒中的可交换态微量元素对溶解态微量元素测定结果可能造成的影响。通过对比研究发现,不同处理方法得到的V、Ni、Cu、Co、Pb以及稀土元素(REEs)的质量浓度存在很大差异,说明悬浮颗粒物质可能对海水中相应元素的测定产生较大的影响。各种微量元素之间的差异和相应离子或离子团的电荷性质、在海水中的配位作用以及悬浮颗粒物质的表面电荷性质有关。初步研究结果表明,在类似于胶州湾这样的近海海域,悬浮颗粒物质是控制微量元素分布特征的一个重要因素。     

胶东海阳所超镁铁岩中强亲铁元素的地球化学特征及其构造环境探讨

强亲铁元素与亲石元素具有不同的地球化学行为,因此能够从不同的角度为造山带中超镁铁岩的成因及演化提供重要信息.位于苏鲁造山带东北端的胶东海阳所超镁铁岩主要由橄榄岩和辉石岩组成,它们常以团块状赋存于花岗质片麻岩中.虽然前人对这些超镁铁岩已经开展大量岩石学研究,但关于其成因及构造属性仍存在较大争议.本文开展了海阳所超镁铁岩的...     

湖相介形类壳体微量元素在古环境重建中的应用

湖相介形类壳体微量元素(本文主要指Mg和Sr)是重建古环境的重要指标之一,可以定性或定量地反映湖水信息。自20世纪80年开始应用以来,经过30余年的发展取得了很大进展。在古环境重建过程中主要存在两类影响因素:(1)其宿生水体中M/Ca比值(M主要指Mg和Sr)的影响因素:季节变化、微环境差异和湖泊演化过程,这类因素通过对宿生水体中M/Ca比值来影响介形虫壳体中的M/Ca比值,进而造成古环境重建结果的误差增大或可靠性降低;(2)介形类壳体微量元素分配系数的影响因素:宿生水体中M/Ca比值、温度、碱度等,这类因素能够直接影响介形类壳体分泌、钙化的生命-化学过程的因素,是定量重建的重要影响因素。加强现代介形类生活习性和微量元素组成变化过程的研究可以消除或减小以上影响因素对古环境重建的影响,提高介形类壳体化石中微量元素组成在古环境重建研究中的精度和可靠性。     

云南金沙厂铅锌矿床地球化学特征及其指示意义

位于扬子地块西南缘的“川滇黔铅锌矿集区”是我国西南大面积低温成矿域的重要组成部分, 金沙厂铅锌矿床是其中典型矿床之一, 前人针对金沙厂矿床的成矿物质来源和成矿流体特征开展了大量研究, 但围岩对成矿的贡献和矿床成因仍不明确。针对这一问题, 本文系统分析了金沙厂闪锌矿及围岩的微量元素组成, 结合围岩和萤石的稀土元素特征, 探讨了围岩对成矿的贡献, 厘定了矿床成因。研究表明, 闪锌矿以富集Cd、Ge、Cu、Ga, 贫Fe、Mn、In、Co、Ni为特征, 这些元素多以类质同象的形式赋存在闪锌矿中, 个别元素如Cu、Ge等含量变化范围较大, 可能与低温流体有关。矿床中闪锌矿存在多种颜色的原因可能是Cu、Ge等多种元素共同作用的结果。近矿端的围岩明显富集Zn、Pb、As、Cd等元素, 而闪锌矿中同样富集这些元素, 说明围岩为成矿提供了部分金属元素。萤石继承了围岩的Eu、Ce负异常, 并受到了具有较高Ce负异常的成矿流体影响。萤石较围岩具有较高的Y/Ho比值, 说明萤石中的部分Y来源于围岩, 从而导致萤石具有较高的Y/Ho值。总体上, 该矿床中闪锌矿微量元素组成与MVT矿床基本一致, 明显有别于喷流沉积型、岩浆热液型和远端夕卡岩型矿床, 其成矿温度属于低温范围, 结合其矿床地质地球化学特征, 本文认为金沙厂铅锌矿床属于MVT铅锌矿床。     

黄河和长江沉积角闪石亲石元素地球化学特征对比与物源辨识

为辨识黄河和长江入海沉积物中角闪石的物源差异,对采自黄河口段、长江口段以及废黄河口和苏北沿岸,共26个样点、38组粒度粗细不同的碎屑角闪石进行了矿物元素地球化学测试,获得了这些角闪石群体的50种常量和微量元素含量值.结果表明:不同粒级测量的同源角闪石元素含量除少数大离子活泼元素相对偏差较大之外,大部分元素含量差异性较小...     

XFEM formulation with sub-interpolation,and equivalence to zero-thickness interface elements

This paper describes a particular formulation of the extended finite element method (XFEM) specifically conceived for application to existing discontinuities of fixed location, for instance, in geological media. The formulation is based on two nonstandard assumptions: (1) the use of sub-interpolation functions for each subdomain and (2) the use of fictitious displacement variables on the nodes across the discontinuity (instead of the more traditional jump variables). Thanks to the first of those assumptions, the proposed XFEM formulation may be shown to be equivalent to the standard finite element method with zero-thickness interface elements for the discontinuities (FEM+z). The said equivalence is theoretically proven for the case of quadrangular elements cut in two quadrangles by the discontinuity, and only approximate for other types of intersections of quadrangular or triangular elements, in which the XFEM formulation corresponds to a kinematically restricted version of the corresponding interface plus continuum scheme. The proposed XFEM formulation with sub-interpolation, also helps improving spurious oscillations of the results obtained with natural interpolation functions when the discontinuity runs skew to the mesh. A possible explanation for these oscillations is provided, which also explains the improvement observed with sub-interpolation. The paper also discusses the oscillations observed in the numerical results when some nodes are too close to the discontinuity and proposes the remedy of moving those nodes onto the discontinuity itself. All the aspects discussed are illustrated with some examples of application, the results of which are compared with closed-form analytical solutions or to existing XFEM results from the literature.     

Strategic elements in the Fort Cooper Coal Measures: potential rare earth elements and other multi-product targets

Abstract

Mineral matter in coals has been found to host valuable elements including germanium, lithium and rare-earth elements (REE), but such content of Australian coals remains under-explored. The aim of this paper is to provide a proof-of-concept study that determines elemental concentrations in the mineral matter of the high-ash, Fort Cooper Coal Measures (FCCM), Bowen Basin, Queensland. Coal in the FCCM has good coking properties but has not been extensively explored owing to its high ash content. This study performs a preliminary assessment of the elements from the coal portion that would typically become waste after washing or combustion. Given that the needs for industrial extraction methods will change over time, cataloguing and documenting the elemental composition of coal may assist future development of multiple products for the benefit of both the coal and mineral industries. This preliminary study has revealed similar elevations of REE and higher-than-average crustal concentrations of lithium, bismuth and scandium in some of the samples. Further analyses will be required on a larger dataset to better understand elemental associations and explore spatial patterns of elemental content that may indicate localised enrichments. Understanding the potential of valuable elements in the FCCM may stimulate interest in multiple-product-coal (or elemental-coal) mining in this under-exploited resource and further encourage the reduction of waste from other Australian coals at the wash-plant stage.     

新疆且末县米特河地区1:5万水系沉积物地球化学特征及找矿意义

根据1:5万水系沉积物地球化学测量工作成果,对采集的3138件样品中Cu,Pb,Zn,Au,Ag,W,Sn,Mo,Bi,As,Sb,Cr,Co,Ni共14种元素进行分析测试。研究结果表明,Au,Ag,Cu,Ni是区内最有找矿潜力的成矿指标元素;聚类分析所划分的4类元素簇群,主要与中低温成矿元素、阿尔金南缘断裂、蛇绿混杂岩相关,通过因子分析得到Ni-Cr-As-Sb-Cu-Bi,W-Bi-As-Cu,Bi-W,As,Ag-Zn-Pb,Cu-Bi-As共6类元素组合。其中Cr,Ni,Sb,Cu,As,Bi组合反映出与低温热液活动和断裂构造活动有关;Cr,Ni元素的富集主要与研究区内叶桑岗蛇绿混杂岩带关系密切;Ag,Pb,Zn组合则与地层低温热液元素局部富集和断裂构造活动密切相关。在综合异常分析和查证的基础上,结合区域成矿地质条件、区内矿产地质特征,圈定、划分出2个找矿远景区,并指出了研究区内以金、铜、银、镍为主要优势矿种,铅、锌为潜力矿种。