陕北志丹油田樊川区长61低阻油层成因分析与识别方法

陕北地区延长组发育低（特）渗储层,除发育通常的高阻油层外,还极易形成低阻油层;因此,低阻油层的发现,极大拓宽了该区石油勘探和开发的领域。根据志丹油田樊川油区长6¹的石油地质特征,结合大量实验和生产数据资料的分析对比,对该区低阻油层的成因机理及宏观控制因素进行了分析。结果表明:长6¹储层的孔隙结构复杂导致束缚水饱和度增高,高地层水矿化度、高泥质含量及放射性砂岩的存在,是低阻油层得以形成的主要原因。通过大量实际试油和测井资料的对比可见,应用计算自然电位与自然电位曲线重叠法可以快速直观显示其含油性,声波时差-深电阻率的交会图与自然伽马-深电阻率交会图相结合可有效识别低阻油层。对区内85口探井进行了测井资料的二次解释,在长6发现了初次解释所遗漏的45个低阻油层,油层数由原来的117个增加到162个,净增27.8%。     

高寒富水地区-西藏那曲镇给水管道的安装及维修

西藏那曲镇是全世界海拔最高、含氧量最稀薄、最后一个安装自来水的地级城市。那曲镇海拔高度为4500m，冻土层深达2．8m，地下水丰富，基础开挖超过lm时就有地下水渗出，且土质多为流沙型，施工时容易引起塌方，施工环境恶劣。本文就那曲镇的具体情况介绍一下给水管道的安装及维修。     

Geophysical investigation using resistivity and GPR methods: a case study of a lubricant oil waste disposal area in the city of Ribeirão Preto,São Paulo,Brazil

Geophysics has been shown to be effective in identifying areas contaminated by waste disposal, contributing to the greater efficiency of soundings programs and the installation of monitoring wells. In the study area, four trenches were constructed with a total volume of about 25,000 m³. They were almost totally filled with re-refined lubricating oil waste for approximately 25 years. No protection liners were used in the bottoms and laterals of the disposal trenches. The purpose of this work is to evaluate the potential of the resistivity and ground penetrating radar (GPR) methods in characterizing the contamination of this lubricant oil waste disposal area in Ribeirão Preto, SP, situated on the geological domain of the basalt spills of the Serra Geral Formation and the sandstones of the Botucatu Formation. Geophysical results were shown in 2D profiles. The geophysical methods used enabled the identification of geophysical anomalies, which characterized the contamination produced by the trenches filled with lubricant oil waste. Conductive anomalies (smaller than 185 Ωm) immediately below the trenches suggest the action of bacteria in the hydrocarbons, as has been observed in several sites contaminated by hydrocarbons in previously reported cases in the literature. It was also possible to define the geometry of the trenches, as evidenced by the GPR method. Direct sampling (chemical analysis of the soil and the water in the monitoring well) confirmed the contamination. In the soil analysis, low concentrations of several polycyclic aromatic hydrocarbons (PAHs) were found, mainly naphthalene and phenanthrene. In the water samples, an analysis verified contamination of the groundwater by lead (Pb). The geophysical methods used in the investigation provided an excellent tool for environmental characterization in this study of a lubricant oil waste disposal area, and could be applied in the study of similar areas.     

变质反应的代数识别方法

在回顾变质矿物共生组合和变质反应图解分析法的基础上，论述了录求变质矿物组合之间、同一组合内矿物之间的平衡变质反应的代数方法，即矩阵高斯变换，线性回归分析、矩阵奇值分解。     

Comparison of chaos detection methods in the circular restricted three‐body problem

In this study, a sample of orbits is considered in the framework of the planar circular restricted three‐body problem. In order to separate ordered from chaotic orbits three numerical methods are compared: the Largest Lyapunov Characteristic Exponent (LLCE) and the Smaller Alignment Index (SALI) provide a fairly good characterization of the chaotic motions, while the computational time required is of the same order; the Correlation Dimension (CD) has the advantage of correctly classifying sticky orbits, but at the expense of a longer computational time. In order to classify a given orbit, any pair of the three methods can be considered, but LLCE and SALI are recommended due to their speed. (© 2014 WILEY‐VCH Verlag GmbH & Co. KGaA, Weinheim)     

3XMM J185246.6+003317 as transient neutron star

We performed an X‐ray timing and spectral analysis of the variable source 3XMM J185246.6+003317 to investigate its physical nature. The data from all observations of 3XMMJ185246.6+003317 conducted by XMM‐Newton EPIC MOS1 and MOS2 with the same instrumental setup in 2004–2009 were reprocessed to form a homogenous data set of solar barycenter corrected photon arrival times and high S/N spectra of 3XMM J185246.6+003317. A Bayesian method for the search, detection, and estimation of the parameters of a periodic signal of unknown shape was employed, as developed by Gregory & Loredo (1992, 1993). The results show that 3XMM J185246.6+003317 is a transient neutron star with the genuine spin‐period of 23.11722 (23.11711–23.11727) s and its derivative of 5.3(0.3–5.5)×10^–11 s s^–1, implying a characteristic age of 7 (6–104) kyr, if the period derivative can be ascribed to the genuine spin‐down rate of the neutron star. The rotational‐phase averaged X‐ray spectra at the different brightness periods can be fitted with a highly absorbed blackbody model with different temperatures. The phase‐folded light curves in different energy bands with high S/N ratio show a double‐peaked profile; the variations depend on time and energy, indicating that radiation emerges from at least two emitting areas. The spectra at the phases corresponding to the maxima in the phase‐folded light curve show different spectral parameters of absorbed blackbody radiation, i.e. the hotter one has a smaller size. The source is detected only from September 2008 to April 2009 with persistently decreasing brightness, but not before, even though it was observed by XMM. Hence, it is a transient neutron star or a binary system hosting it. (© 2015 WILEY‐VCH Verlag GmbH & Co. KGaA, Weinheim)     

A multiple shooting approach for the numerical treatment of stellar structure and evolution

We present a new numerical method for solving the system of partial differential equations describing the structure and evolution of a spherically symmetric star. As usual, we employ the transversal method of lines in order to split the equations into a coupled spatial and temporal part. The novel features of the algorithm are the following: (a) Instead of using the Lagrangian picture we formulate the system of partial differential equations in the Eulerian picture. (b) We reformulate the equations of stellar structure as a multipoint boundary-value problem. By means of this reformulation the rather clumsy iterative matching procedure of stellar atmosphere and interior is avoided. (c) The multipoint boundary-value problem is solved by the multiple shooting method. This approach not only ensures a high accuracy of the stellar models calculated at each time step but also allows the free boundaries inside the star due to different energy transport mechanisms to be located exactly. (d) The time derivatives involved in the stellar-structure equations are discretized implicitly to second order accuracy. Moreover, at each time step, the chemical abundances are determined by using a sophisticated update procedure. In this way, a high accuracy is achieved with respect to the integration in time. The algorithm has turned out to be exceedingly reliable and numerically accurate. This is shown by the evolution of a 1 M_⊙ star up to the hydrogen-shell burning phase. In this example, the virial theorem, the law of mass conservation, and the law of energy conservation is fulfilled to a hitherto unattainable degree of accuracy. Since the multiple shooting method, which is at the heart of our approach, is a perfect example of a parallel algorithm, the computational speed of the algorithm might be substantially improved provided easy-to-program, high-performance parallel computers with sufficiently many processors become available in the near future.     

Numerical analysis of the symmetric methods

Aimed at the initial value problem of the particular second-order ordinary differential equations,y =f(x, y), the symmetric methods (Quinlan and Tremaine, 1990) and our methods (Xu and Zhang, 1994) have been compared in detail by integrating the artificial earth satellite orbits in this paper. In the end, we point out clearly that the integral accuracy of numerical integration of the satellite orbits by applying our methods is obviously higher than that by applying the same order formula of the symmetric methods when the integration time-interval is not greater than 12000 periods.     

无人值守GNSS方法测定射电望远镜参考点

为解决常规射电望远镜归心测量工作耗时耗力的问题,引入GNSS (Global Navigation Satellite System)同步监测技术实现了一种针对射电望远镜参考点的无人值守监测方法.设计了针对GNSS靶标点观测数据的归算方法,包括数据匹配、数据检核以及后续精度评估等步骤,并对2018年佘山25-m射电VLBI (Very Long Baseline Interferometry)望远镜的GNSS靶标点实测数据开展了数据预处理、解析与归心解算等,证明了该方法的可行性.结果表明基于该方法,采用单日内部分(5%)数据(约7600个靶标点),所测定的VLBI望远镜参考点的点位形式精度可达3 mm.总结了针对射电望远镜采用GNSS开展无人值守归心测量先行试验中的一些经验教训,明确了利用该方法测量过程中应该注意的问题,为今后更高精度射电望远镜参考点无人值守归心监测提供重要参考.     

面向单脉冲信号分类的集成特征选择与评价

受大量射频干扰信号影响, 快速从海量观测数据中准确识别出单脉冲信号已成为天文数据处理的一项重要任务, 而设计和提取有效数据特征, 是利用机器学习进行单脉冲信号高效识别的决定因素. 针对如何选择最优特征, 进而提升单脉冲信号的分类精度这一关键问题, 设计了面向单脉冲信号分类的集成特征选择方法. 方法首先混合单脉冲信号的参数特征、统计特征和抽象特征, 然后分别利用5种单一特征选择方法选出各自的最优特征集, 最后利用贪心策略对5种单一方法获取的最优特征集进行集成筛选, 获取最优集成特征集. 实验表明, 最优特征集合既包含统计特征也包含抽象特征. 在相同特征数量下, 利用集成特征选择比单一特征选择能获得更高的模型精度, 可使F1值最高提升1.8%. 在海量数据背景下, 集成特征选择对减少特征数量、提升分类性能和加快数据处理速度具有重要作用.