A migration model of magmatism explaining a ridge subduction, and its details on a statistical analysis of the granite ages in Cretaceous Southwest Japan

A migration model of magmatism based on the granite ages in Southwest Japan is proposed to explain the ridge subduction beneath the Eurasia continent as the cause of the along-arc and across-arc youngings of the granite ages and the very high activity of the magmatism in the Cretaceous. For the construction of the magmatic model, the localities of the granite age samples are denoted by the cartesian coordinates X and Y, which are measured along and normal to the Median Tectonic Line (MTL), respectively, and their ages are set corresponding to the coordinate Z vertical to the X–Y plane. The age trend is then formulated by a regression plane of Z on X and Y, which inclines in both directions along and normal to the MTL, and approximates the ages with the very high multiple correlation coefficient 0.91. Evaluating the magmatic trend by such a method, various characteristics of the activities can be taken easily; for example, the isochronous line of the magmatism, which is an intersection of the regression plane and an arbitrary horizontal plane, is found to extend landward obliquely across the continental margin. The migrating rate of the isochronous line along the MTL is also taken to be 2.8 cm/year as a reciprocal of the inclination of the along-arc younging. The isochronous line is speculated to be the out-cropped manifestation of the subcrustal linear heat source. Such a migrating linear heat source is probably due to the subduction of an active ridge, the Kula (or Izanagi)–Pacific ridge in the Cretaceous. The migration model of magmatism harmonizes very well with the plates and the ridge motions in the East Asia area during the late Mesozoic. The ridge subduction is one of the important phenomena that explain the unusually active arc magmatism and the migrating slab window; it is important to grasp dynamically the geological messages issued from the system.     

大别山太湖—马庙断裂带两侧变质地体的增温变质作用

大别山榴辉岩地体以太湖马庙断裂带为南界。该断裂带近东西走向, 向南倾斜。通过对石榴石中 Ｍｇ 含量由核部向边缘增高的生长环带构造的分析和详细的 Ｐ Ｔ 轨迹的计算表明, 断裂带北侧的榴辉岩和南侧的角闪岩及角闪片麻岩均经历了降压增温变质过程。热榴辉岩由地幔深处的折返和地温梯度的升高为可能的热源。     

水泉沟杂岩体的地质学和岩石学研究

水泉沟岩体为岩浆成因,岩体的侵位深度2~3km,侵位时代为印支期,划分为4种岩石组合.水泉沟岩体是一个钾质-高钾质的钙碱性、弱碱性和碱性岩石共存的杂岩体.岩石化学成分变异图解证明岩浆存在两种演化趋势,一是酸性演化趋势:辉石闪长岩→角闪二长岩(包括二长岩)→石英碱长正长岩→碱长花岗岩;二是碱性演化趋势:正长岩→霓辉正长岩→碱长正长岩.同时也探讨了这两种演化趋势的内在机理.     

辽宁清原线金厂金矿床地质特征及成因探讨

线金厂金矿床赋存于太古宙紫苏花岗岩、英云闪长岩中,矿床与中生代转湘湖石英闪长岩空间关系密切。矿区各类脉岩发育。脉岩和转湘湖岩体的金丰度均远高于克拉克值,二者为同源岩浆不同演化阶段的产物。金矿床由数条含金石英脉组成,矿脉与脉岩有密切的空间关系和时间联系。矿床硫同位素组成呈有规律变化,即随矿脉与转湘湖岩体之间距离增加,δ³⁴S逐渐降低。矿床各矿脉铅同位素组成变化小,表明成矿物质为单一来源。在δD-δ¹⁸O图解上,成矿流体投影点落于岩浆热液区附近,表明成矿流体主要为岩浆热液。根据以上特征,可以认为线金厂金矿床是与转湘湖岩体有成因联系的岩浆热液型金矿床。     

新疆阿勒泰红柱石-矽线石型递增变质带特征及其PT条件研究

新疆阿勒泰地区发育了红柱石-矽线石型递增变质带,由绿泥石-黑云母带、黑云母-石榴石带、石榴石-十字石带、十字石-红柱石带和矽线石带组成,根据石榴石成分环带、变质与变形关系、矿物共生组合演化等特征,将变质作用分为峰前期、峰期和峰后期3个演化阶段。峰前期、峰期为连续的递增变质过程,形成典型的中-低压过渡型递增变质带,峰后期属于退变质过程。据石榴石一斜长石一黑云母-白云母-石英组合内部一致地质温压计估算出峰期温度-压力：T=580℃～670℃,P一0．4GPa～0．5GPa。变质作用演化具有顺时针的PTt轨迹,代表陆壳有一定程度的构造增厚,但幅度不大,没有大规模的陆壳俯冲或拆沉作用,这种增厚可能以陆壳的构造叠置机制为主。总体相当于地体间斜向走滑兼有一定垂直分量的拼合过程的地球动力学机制。     

Distribution of ductile deformation around the Main Central Thrust zone at the frontal part of nappe in southeastern Nepal Himalaya

A geological survey and morphological analysis of quartz grains were performed to investigate the distribution of ductile deformation caused by the Himalayan Main Central Thrust (MCT) around Dhankuta, southeastern Nepal. The MCT was mapped as the lithological boundary between the gneiss of the Higher Himalayan Crystalline (HHC) as the hanging wall and the inverted metamorphic sequence of the Lesser Himalayan Sediments (LHS) as the footwall. The MCT was found to truncate various stratigraphic levels of LHS and cuts a map‐scale gentle fold developed in the LHS. Ductile deformation was quantified by fractal dimension between size and perimeter of dynamically recrystallized quartz grains in bedded metaquartzite intercalated in both HHC and LHS. Serrate and polygonal shapes of quartz indicate large and small strain rates, respectively, when the temperature during ductile deformation was assumed to be uniform. A peak of strain rate was found at the lithological boundary with the peak width of ca. 500 m. Such a thin shear zone is favorable for producing frictional heat to promote the inverted metamorphism in LHS.     

济宁市梁宝寺煤田地震勘探技术应用效果分析

地震勘探以其高精度、低成本、高效率在煤田勘探中已广泛应用,梁宝寺煤田采用三维地震勘探技术,在解释构造、煤层、岩浆岩等方面取得了显著的效果,为煤炭勘查作出了重要贡献。     

Detrital zircon multi‐chronology,provenance, and low‐grade metamorphism of the Cretaceous Shimanto accretionary complex,eastern Shikoku,Southwest Japan: Tectonic evolution in response to igneous activity within a subduction zone

Detrital zircon multi‐chronology combined with provenance and low‐grade metamorphism analyses enables the reinterpretation of the tectonic evolution of the Cretaceous Shimanto accretionary complex in Southwest Japan. Detrital zircon U–Pb ages and provenance analysis defines the depositional age of trench‐fill turbidites associated with igneous activity in provenance. Periods of low igneous activity are recorded by youngest single grain zircon U–Pb ages (YSG) that approximate or are older than the depositional ages obtained from radiolarian fossil‐bearing mudstone. Periods of intensive igneous activity recorded by youngest cluster U–Pb ages (YC1σ) that correspond to the younger limits of radiolarian ages. The YC1σ U–Pb ages obtained from sandstones within mélange units provide more accurate younger depositional ages than radiolarian ages derived from mudstone. Determining true depositional ages requires a combination of fossil data, detrital zircon ages, and provenance information. Fission‐track ages using zircons estimated YC1σ U–Pb ages are useful for assessing depositional and annealing ages for the low‐grade metamorphosed accretionary complex. These new dating presented here indicates the following tectonic history of the accretionary wedge. Evolution of the Shimanto accretionary complex from the Albian to the Turonian was caused by the subduction of the Izanagi plate, a process that supplied sediments via the erosion of Permian and Triassic to Early Jurassic granitic rocks and the eruption of minor amounts of Early Cretaceous intermediate volcanic rocks. The complex subsequently underwent intensive igneous activity from the Coniacian to the early Paleocene as a result of the subduction of a hot and young oceanic slab, such as the Kula–Pacific plate. Finally, the major out‐of‐sequence thrusts of the Fukase Fault and the Aki Tectonic Line formed after the middle Eocene, and this reactivation of the Shimanto accretionary complex as a result of the subduction of the Pacific plate.     

浅谈花岗岩浆热液的形成及成矿作用

与花岗岩类有关的矿床主要是与其具有时—空及成因联系的岩浆—热液矿床,岩浆能否出溶热液且出溶相当数量热液是花岗岩类成矿的必要前提,直接制约岩浆岩的成矿潜力。基于前人和作者的研究成果得出,与成矿有关的花岗岩中发育的单向固结结构(UST结构)、石英眼、晶洞以及雪球结构等是岩浆挥发分相饱和出溶的标志,岩浆岩组成对于成矿潜力判别的贡献基于元素的地球化学行为以及物理化学条件,挥发组分中卤化物含量的高低和岩石中主量元素的丰度不能作为成矿潜力的判别标志,而微量元素是识别花岗岩类成矿潜力的地球化学指纹。高场强元素以及现出系统地球化学行为变化的稀土元素特征有望成为成矿潜力的最佳判别标志。花岗岩类含矿潜力的评价研究为岩浆热液多金属矿床的成矿预测和勘查评价提供理论指导,本文也指出在研究花岗岩含矿潜力中存在的一些问题及未来的研究方向。     

塔里木陆块周缘岩浆Cu-Ni-Co硫化物矿床形成的探讨

因新发现的夏日哈木超大型岩浆铜镍钴硫化物矿床成岩成矿研究存在争议,对岩浆铜镍钴硫化物矿床的成因机制又引发新一轮的关注。中国造山带中铜镍钴硫化物矿床具有鲜明的分布特点,20世纪80年代东天山黄山东等一批岩浆铜镍钴硫化物矿床的发现,曾经提出蛇绿岩形成铜镍钴硫化物矿床的观点,而后出现了洋壳削减闭合陆-陆碰撞后新生陆壳裂陷槽环境形成铜镍钴矿的主流认识;进入21世纪后,随着塔里木早二叠世大火成岩省的提出,开始将东天山和新疆北山的岩浆铜镍钴硫化物矿床与塔里木大火成岩省的形成关联起来,并认为是地幔柱作用的结果。但随着研究的深入,由于含铜镍钴镁铁-超镁铁岩地球化学具有典型的岛弧特征,又将东天山铜镍钴矿床的形成与俯冲削减的板片再次联系了起来,导致岩浆型铜镍钴硫化物矿床形成背景还存在较大争议。我们认为岩石微量元素显示岛弧信息,是俯冲交代及地壳混染引起的地球化学屏蔽效应;铬尖晶石成分及所反映的氧逸度环境指示为张性环境,而非岛弧。塔里木陆块周缘3期岩浆铜镍钴硫化物矿床成矿代表了中国最重要的3期成镍事件,实际反映了塔里木陆块在全球大陆聚散演化中与超大陆之间关键的聚散事件:(1)新元古代金川Cu-Ni-PGE矿成矿代表了由于地幔柱作用以塔里木、扬子和西澳大利亚陆块之间的裂解为起点的罗迪尼亚超大陆裂解事件,直至早古生代形成原特提斯洋-古亚洲洋;(2)早古生代末夏日哈木Ni-Co矿则是代表冈瓦纳大陆南部裂解从而形成古特提斯洋的标志性事件;(3)晚古生代早二叠世坡一Cu-Ni矿应是地幔柱作用潘吉亚超大陆生长大火成岩省的深成相组成。本文系统总结了3个矿床的成矿特征,并对比了3个矿床的区别。尽管坡一在3个矿床中有基性程度最高的母岩浆,但坡一相对于夏日哈木、金川显示出低的地壳混染程度,特别是地壳硫混染程度,这可能是坡一成矿相对差的主要原因。此外坡一不仅地壳混染程度低,且其混染了较多的钙质,抑制了硫化物饱和。