幔源CO_2释出机理、脱气模式及成藏机制研究进展

针对幔源CO2如何从地幔岩浆中脱出并进入沉积地层中形成CO2气藏聚集这一关键问题,总结了国内外研究进展和前缘方向。研究表明,地幔深部的碱性玄武岩浆和碱性岩浆才是深部流体和CO2等挥发份大量赋存、渗滤和释出的场所。浅成侵入岩、次火山岩和火山通道等是CO2释放和聚集的有利位置,岩浆期后和岩浆衰弱期的热液活动阶段是CO2大量释放和聚集的有利时期。幔源CO2进入沉积盆地中具有3种脱气模式,即沿岩石圈断裂直接脱气模式、热流底辟体脱气模式和壳内岩浆房-基底断裂组合脱气模式。CO2的固有物化性质决定其运移相态多样,具有运移和聚集过程同步的特征。只有在满足大量的化学消耗及地层水或原油的溶解和耗散之后才能形成CO2有效聚集。幔源CO2成藏和分布主要受岩浆气源体和气源断裂体系的控制。今后,在超临界CO2及其对油气运移聚集的作用、CO2与深大断裂及火山岩的关系、CO2脱气运移机制、CO与常规烃类油气的耦合差异成藏机制等方面仍需要进一步的研究和探索。     

硫铅酸盐“S”型瞬凝水泥干法护壁堵漏技术研究

介绍了硫铝酸盐“Ｓ”型瞬凝水泥干法者漏时使用的配方,阐述了输送工具和扫孔钻具的设计以及灌注工艺技术。     

Performance of Mortar and Chemical Grout Injection into Surrounding Soil When Slurry Pipe-jacking Method is Used

Small-diameter shallow tunnels are often being built by using the slurry pipe-jacking method. This system involves the pushing or thrusting of a drivage machine and concrete pipes into the ground. Chemical grout injection into the surrounding soil around the tunnel is carried out after the drivage and pushing processes are finished. The purpose of the chemical grout injection is to maintain permanent stability of the surrounding soil. However, the behavior of the chemical grouting material in the surrounding soil around the tunnel and the amount of optimum injection is not clearly understood. From these points of view, this paper discusses the performance of the chemical grouting material, when it is injected into the surrounding soil around the tunnel, by means of 2-D Eulerian–Lagrangian seepage analysis. Moreover, the effectiveness of the chemical grout injection was evaluated by using the non-linear finite element method. This investigation show when the range of the grouted zone is designed; it is necessary that the relationship between Young’s modulus of the soil/grouted zone and the confining stress be taken into consideration in order to establish effective, economical and safe chemical grout injection system. Understanding the performance of the seepage/dispersion behavior of the chemical grout and the characteristics of soil/ grouted zone is also important.     

Cyclicity in the Main and Upper Zones of the Bushveld Complex, South Africa: Crystallization from a Zoned Magma Sheet

The major element composition of plagioclase, pyroxene, olivine,and magnetite, and whole-rock ⁸⁷Sr/⁸⁶Sr data are presented forthe uppermost 2·1 km of the layered mafic rocks (upperMain Zone and Upper Zone) at Bierkraal in the western BushveldComplex. Initial ⁸⁷Sr/⁸⁶Sr ratios are near-constant (0·7073± 0·0001) for 24 samples and imply crystallizationfrom a homogeneous magma sheet without major magma rechargeor assimilation. The 2125 m thick section investigated in drillcore comprises 26 magnetitite and six nelsonite (magnetite–ilmenite–apatite)layers and changes up-section from gabbronorite (An₇₂ plagioclase;Mg# 74 clinopyroxene) to magnetite–ilmenite–apatite–fayaliteferrodiorite (An₄₃; Mg# 5 clinopyroxene; Fo₁ olivine). The overallfractionation trend is, however, interrupted by reversals characterizedby higher An% of plagioclase, higher Mg# of pyroxene and olivine,and higher V₂O₅ of magnetite. In the upper half of the successionthere is also the intermittent presence of cumulus olivine andapatite. These reversals in normal fractionation trends definethe bases of at least nine major cycles. We have calculateda plausible composition for the magma from which this entiresuccession formed. Forward fractional crystallization modelingof this composition predicts an initial increase in total iron,near-constant SiO₂ and an increasing density of the residualmagma before magnetite crystallizes. After magnetite beginsto crystallize the residual magma shows a near-constant totaliron, an increase in SiO₂ and decrease in density. We explainthe observed cyclicity by bottom crystallization. Initiallymagma stratification developed during crystallization of thebasal gabbronorites. Once magnetite began to crystallize, periodicdensity inversion led to mixing with the overlying magma layer,producing mineralogical breaks between fractionation cycles.The magnetitite and nelsonite layers mainly occur within fractionationcycles, not at their bases. In at least two cases, crystallizationof thick magnetitite layers may have lowered the density ofthe basal layer of melt dramatically, and triggered the proposeddensity inversion, resulting in close, but not perfect, coincidenceof mineralogical breaks and packages of magnetitite layers. KEY WORDS: layered intrusion; mineral chemistry; isotopes; magma; convection; differentiation     

渤南洼陷罗151块火成岩油藏特征及开发对策

罗151块火成岩油藏是近年在济阳坳陷发现的中型油藏，油藏埋深3150m；在研究罗151井区火成岩成因、侵入期次、岩相学及储层非均质性的基础上，建立了火成岩储层概念模型，划分出角岩微孔隙型油藏及辉绿岩溶蚀孔隙-裂缝型油藏两个类型，纵向上分为4个带，平面上分为3个区；预测了火成岩储层发育的有利部位；部署了合理的开发井网，钻探后，完钻新井14口，平均单井日产油27t，取得了显著效果；火成岩油藏初期产能高，产量递减快，弹性产率低，依靠天然能量开采，最终采收率只有14．1％，可以进行注水开发，注水效果较好。     

冲绳海槽玄武岩中中酸性残余熔体研究及其岩石学意义

与洋壳有关的酸性岩由于对了解幔源岩浆的演化以及判别古老蛇绿岩套及其构造位置的重要意义而倍受岩石学家和构造地质学家的关注。本对发现于冲绳海槽玄武岩基质中的中酸性到酸性残余熔体进行了详细研究，它们提供了幔源玄武岩浆结晶分异形成酸性岩浆的直接证据。在细小的基质矿物间分布有一种玻璃质的残余熔体，其成分随距冷凝边距离(L)的增加而越来越酸性。在SiO2对Na2O K2O图解上，残余熔体的投影点从玄武岩到英安岩均有分布，反映了一个连续的演化系列。在AFM图解上，残余熔体表现出与Thingmuli火山岩系列类似的拉斑玄武岩系列的演化趋势。我们的研究表明：残余熔体的演化受结晶分异作用控制。在早期结晶阶段，辉石的结晶起主导作用，结果造成残余熔体中SiO2、Al2O3，Na2O的迅速增加，FeO、MgO、CaO迅速降低。在晚期结晶阶段，斜长石成为主导结晶相，导致残余熔体中Al2O3，Na2O的迅速消减。Al2O3、Na2O从增加到降低的转变出现在SiO2=62％左右。在L=27．5mm处，85～90％的基质岩浆已发生了结晶作用，导致残余熔体中SiO2含量达到69～70％，而且此处还新出现了一种富FeTi的氧化物。该玄武岩中残余熔体和基质矿物的成分及演化特征分别与Thingmuli火山岩系列中酸性端元的组成相似，在也佐证了Thingmuli火山岩系列是幔源岩浆结晶分异的产物.     

注水煤体应力能 V-f 转化与释放机理研究

文章分析了在煤层注水湿润后煤体弹性能的转化与消耗过程，给出在湿润状态下能量由体变弹性能向形变弹性能转化进而自耗释放的理论模型。指出在坚硬干燥煤体中，注水后在水压力和毛细力的切割作用下，裂隙大量扩展，丰富了自由裂隙，产生更多的裂隙启发(裂隙切口)，使原来近似的刚性煤体变成由裂隙分割的块体组成的组合体或半组合体。裂隙中水的粘滞作用及水分子吸附力使块体问粘性结合、刚度降低、形变增大。煤体形变弹性能自身消耗释放的形式有3种：产生剪应力导致自由裂隙问错动摩擦；强度降低，使裂隙启发被劈裂成自由裂隙；湿润煤体蠕变性增强，产生整体性移动作功。初步给出能量消耗的量化表达式。通过这一理论，能建立煤层注水湿润度与冲击地压灾害发生的更直接的关系，使进一步量化该关系成为可能。从更深层次解释煤层注水防治冲击地压的机理。     

Origin of fine-scale sheeted granites by incremental injection of magma into active shear zones: examples from the Pilbara Craton, NW Australia

In the Archaean Pilbara Craton of Western Australia, three zones of heterogeneous centimetre- to metre-scale sheeted granites are interpreted to represent high-level, syn-magmatic shear zones. Evidence for the syn-magmatic nature of the shear zones include imbricated and asymmetrically rotated metre-scale orthogneiss xenoliths that are enveloped by leucogranite sheets that show no significant internal strain. At another locality, granite sheets have a strong shape-preferred alignment of K-feldspar, suggesting magmatic flow, while the asymmetric recrystallisation of the grain boundaries indicates that non-coaxial deformation continued acting upon the sheets under sub-solidus conditions. Elsewhere, randomly oriented centimetre-wide leucogranite dykes are realigned at a shear zone boundary to form semi-continuous, layer-parallel sheets within a magma-dominated, dextral shear zone.

It is proposed that the granite sheets formed by the incremental injection of magmas into active shear zones. Magma was sheared during laminar flow to produce the sheets that are aligned sub-parallel to the shear zone boundary. Individual sheets are fed by individual dykes, with up to 1000s of discrete injections in an individual shear zone. The sheets often lack microstructural evidence for magmatic flow, either because the crystal content of the magma was too low to record internal strain, or because of later recrystallisation.