低速冲击下高强钢绞线网-高性能砂浆加固钢筋混凝土梁试验研究

研究了高强钢绞线网-高性能砂浆加固钢筋混凝土梁的抗低速冲击性能,利用落锤冲击试验法对4根简支钢筋混凝土梁进行对比试验研究,其中1根为普通梁,3根为加固梁,通过分析加固前后梁的破坏形态,结合挠度变化、钢筋的应变以及加速度的时程曲线,对比得到了钢筋混凝土梁加固后的抗冲击性能。研究结果表明：加固后钢筋混凝土梁的抗冲击能力显著提高,钢绞线和砂浆作为外加层,不仅增加了梁的抗弯剪能力和刚度,提高了结构的耗能能力,而且限制了裂缝的发展,使梁的整体性和延性更好;在相同冲击作用下,钢绞线直径的增加能适当提高结构的抗冲击性能。     

水化硅酸钙动态力学性能的分子动力学模拟研究

对水泥主要水化产物——水化硅酸钙的力学特性进行了分子动力学模拟。采用Hamid 1.1纳米托贝莫来石作为水化硅酸钙的初始结构,通过分子动力学模拟,获得水化硅酸钙的拉伸和压缩应力应变关系,并考虑了应变率和原子数对力学特性的影响。分子动力学模拟研究发现,计算峰值应力、峰值应变都较宏观试验结果高出很多;拉伸峰值应力较压缩峰值应力要小;峰值应力、峰值应变和弹性模量随着应变率的增加而增加,随着模拟晶胞体积（原子数）的增加而降低。研究表明采用分子动力学模拟能获得原子尺度水化硅酸钙动态力学性能,为揭示水泥基材料动态力学性能微观机理奠定了基础。     

Change of Indonesian Throughflow outflow in response to East Asian monsoon and ENSO activities since the Last Glacial

The Indonesian Throughflow (ITF) links upper ocean waters of the west Pacific and Indian Ocean, modulates heat and fresh water budgets between these oceans, and in turn plays an important role in global climate change. The climatic phenomena such as the East Asian monsoon and El Niño-Southern Oscillation (ENSO) exert a strong influence on flux, water properties and vertical stratification of the ITF. This work studied sediments of Core SO18462 that was retrieved from the outflow side of the ITF in the Timor Sea in order to investigate response of the ITF to monsoon and ENSO activities since the last glacial. Based on Mg/Ca ratios and oxygen isotopes in shells of planktonic foraminiferal surface and thermocline species, seawater temperatures and salinity of both surface and thermocline waters and vertical thermal gradient of the ITF outflow were reconstructed. Records of Core SO18462 were then compared with those from Core 3cBX that was recovered from the western Pacific warm pool (WPWP). The results displayed that similar surface waters occurred in the Timor Sea and the WPWP during the last glacial. Since ～16 ka, an apparent difference in surface waters between these two regions exists in salinity, indicated by much fresher waters in the Timor Sea than in the WPWP. In contrast, there is little change in difference of sea surface temperatures (SSTs). With regard to thermocline temperature (TT), it increased until ～11.5 ka since the last glacial, and then remained an overall unchanged trend in the WPWP but continuously decreased in the Timor Sea towards the late Holocene. Since ～6 ka, thermocline waters have tended to be close to each other in between the Timor Sea and the WPWP. It is indicated that intensified precipitation due to East Asian monsoon and possible ENSO cold phase significantly freshened surface waters over the Indonesian Seas, impeding the ITF surface flow and in turn having enhanced thermocline flow during the Holocene. Consequently, thermocline water of the ITF outflow was cooling and thermocline was shoaling towards the late Holocene. It is speculated that, in addition to strengthening of East Asian winter monsoon, increasing ENSO events during the late Holocene likely played an important role in influencing thermocline depth of the ITF outflow.     

淋洗剂乙二胺四乙酸对重金属污染土工程特性的影响

以重金属铅（Pb2+）污染土和淋洗剂乙二胺四乙酸（EDTA）为研究对象,通过批次试验研究了不同浓度EDTA的淋洗对Pb2+污染土的渗透特性、持水特性、压缩特性、抗剪强度等工程特性的影响,为淋洗修复后土壤的二次利用提供参数支持。基于矿物成分、孔隙结构等微观试验,揭示了土壤工程特性变化的内在机制。研究结果表明,当淋洗剂EDTA浓度从0增加到0.15 mol/L,经淋洗修复后的污染土壤pH值从7.94下降到5.12,渗透系数降低超过一个数量级,黏聚力降低50%以上,而内摩擦角增大,持水性能提高,孔隙比从0.81下降到了0.76。微观试验的结果表明,随着淋洗剂浓度的增大,土壤中的蒙脱石、钠长石和伊利石矿物含量减少,石英矿物含量增加,其中蒙脱石含量从7.87%下降到了0.07%,而石英矿物含量增加了11.09%;淋洗后土壤单位质量进汞量由0.22 ml/g降低到0.15 ml/g,土壤总孔隙体积减少。重金属污染土淋洗修复工程在考虑重金属去除率及经济性指标的同时,还应考虑淋洗剂对土壤工程特性的弱化。     

基于现场热响应测试方法的地下岩土热物性分析

目前获取导热系数的主要方法是现场热响应试验,但该方法缺乏统一的技术标准,导致计算结果可比较性差,难以应用。笔者开展了不同热响应试验设备的原位热物性测试系列试验,分析了测试与数据处理方法对测试结果的影响,探讨了试验过程中需要注意的问题。结果显示：为减少试验误差,两次热响应试验测试的时间间隔不应少于10 d;应尽量避免循环水与岩土介质以外的其他介质产生热量交换;对于恒热流热响应试验,导热系数值与舍弃时间（1.0~12.0 h）成正相关关系;而对于定进回循环水温差的热响应试验,导热系数值与舍弃时间（0.0~12.0 h）成负相关关系;舍弃时间大于12.0 h时,导热系数变化趋于稳定。按统一标准舍弃前12.0 h的测试数据进行导热系数计算,6家单位的导热系数计算值都在2.2～2.8 W/(m·℃)范围内,测试结果合理可靠。     

南黄海中部海底沉积物声阻抗特性

基于在南黄海中部海域获得的大量海底沉积物样品及其测试数据,分析讨论了该区域海底浅表层沉积物声阻抗特性及其与沉积物物理力学性质参数的相关关系。研究表明:研究区浅表层沉积物声阻抗呈现出分区域分布的特征,可分为西南部声阻抗高值区、东北部声阻抗低值区以及北西-东南向声阻抗梯度带3个区域。通过回归分析,建立了声阻抗与沉积物物理力学参数的经验回归方程。结果表明:声阻抗与密度、含水率、孔隙比、孔隙度、液限、塑限、塑性指数、压缩系数等参数的相关性较好,判定系数R²一般大于0.8,而与砂粒含量、黏粒含量、中值粒径、抗剪强度等参数的相关性相对较差,判定系数R²一般小于0.7。将声阻抗与物理力学性质的相关性和声速与物理力学性质的相关性进行了对比,结果表明,声阻抗与上述参数的判定系数R²均大于声速与上述参数的判定系数,从而表明声阻抗是一个能够更好地反映声学特性与物理力学性质关系的沉积物声学特性参数。     

Variations in soil properties and their effect on subsurface biomass distribution in four alpine meadows of the hinterland of the Tibetan Plateau of China

To understand and predict the role of soils in changes in alpine meadow ecosystems during climate warming, soil monoliths, extending from the surface to the deepest roots, were collected from Carex moorcroftii, Kobresia humilis, mixed grass, and Kobresia pygmaea alpine meadows in the hinterland of the Tibetan Plateau, China. The monoliths were used to measure the distribution with depth of biomass, soil grain size, soil nutrient levels, and soil moisture. With the exception of the K. pygmaea meadow, the percentages of gravel and coarse sand in the soils were high, ranging from 37.7 to 57.8% for gravel, and from 18.7 to 27.9% for coarse sand. The texture was finest in the upper 10 cm soil layer, and generally became coarser with increasing depth. Soil nutrients were concentrated in the top 15 cm soil layer, especially in the top 10 cm. Soil water content was low, ranging from 3 to 28.4%. Most of the subsurface biomass was in the top 10 cm, with concentrations of 79.8% in the K. humilis meadow, 77.6% in the mixed grass meadow, and 62.3% in the C. moorcroftii meadow. Owing to deeper root penetration, the concentration of subsurface biomass in the upper 10 cm of K. pygmaea soil was only 41.7%. The subsurface biomass content decreased exponentially with depth; this is attributed to the increase in grain size and decrease in soil nutrient levels with depth. Soil water is not a primary factor influencing the vertical and spatial distribution of subsurface biomass in the study area. The lack of fine material and of soil nutrients resulted in low surficial and subsurface biomass everywhere.     

Statistical Distributions of Hydraulic Conductivity from Reliability Analysis Data

This paper describes a first-order reliability-based analysis to identify the best-fit probability distributions for hydraulic conductivity. The analysis involved the use of existing hydraulic conductivity model developed from laboratory data and applied to lateritic soils, considering variations in soil parameters. Plots of reliability indices versus coefficients of variation were first made for hydraulic conductivity as well as for initial degree of saturation, plasticity index and clay content, considering three compactive efforts and log-normally distributed hydraulic conductivity. The traditional two-parameter log-normal distribution was compared to four alternative distributions: normal, gamma, Gumbel (extreme value type I-EVT-I) and Weibull (extreme value type III-EVT-III). The analysis showed that the Weibull and normal are the best-fit probability distributions for the hydraulic conductivity based reliability data. Hydraulic conductivities predicted from reliability analysis were used to demonstrate the possibility of applying the results obtained in this research by practising engineers. Experimentally-determined hydraulic conductivities were shown to be in good agreement with predicted values.     

埕岛油田海域海底沉积特征与工程地质特性

详细阐述了埕岛油田海域海底沉积和冲淤特征,介绍了沉积物的成分、类型和分布特征,并综合描述了埕岛海域海底地貌形态和海底沉积物的物理力学特性,上述研究对埕岛油田的进一步研究和开发有指导意义。     

Geotechnical characterization of slump scars,eroded slopes,and correlated deposits on continental margins: Gulf of Lions,Western Mediterranean sea

Abstract

Vertical variations of geotechnical properties in the uppermost sediment layers characterize the main sedimentary processes acting on the construction and destruction of progressive‐type continental slopes. In the Gulf of Lions, the original thicknesses and distribution of the uppermost sedimentary layers of the continental slope and rise, which consist of Holocene muds overlying Pleistocene muds, have been greatly modified by erosion and several kinds of slope failure processes. Each process is typified through sets of geotechnical properties measured in the eroded or slumped sections and in the associated sediment accumulations.

In slump scars, the water‐rich Holocene muds lie on fine, overconsolidated, Pleistocene muds with high plasticity and low shear strength. In bottom current‐eroded slopes, where modern sedimentation is extremely reduced, the Pleistocene muds frequently outcrop and may sometimes be overlain by a very thin layer of Holocene muds. The Pleistocene muds of eroded slopes are overconsolidated and more silty and less plastic than the Pleistocene muds from slopes affected by slope failure, their shear strength being 10 times greater.

Deposits at the toe of slumps are very often formed by several superposed three‐layer units (triplets of interstratified Holocene, transitional, and Pleistocene layers) issued from retrogressive slumping occurring in the slump scars above their head area. The main body of each layer is then relatively undisturbed, showing the usual burial geotechnical gradients due to overburden pressure (i.e., decrease of water content and increase of unit weight and shear strength). At the toe of bottom current‐eroded slopes, a thick and homogeneous layer of Holocene muds overlies the Pleistocene muds; this Holocene layer has unappreciable burial depth gradient of its geotechnical parameters because of a high rate of modem and continuous deposition.