Reduction of hydroelastic responses of a very-long floating structure by a floating oscillating-water-column breakwater system

The hydroelastic responses of a very-long floating structure (VLFS) placed behind a reverse T-shape freely floating breakwater with a built-in oscillating water column (OWC) chamber are analyzed in two dimensions. The Bernoulli–Euler beam equation is coupled with the equations of rigid and elastic motions of the breakwater and the VLFS. The interaction of waves between the floating rigid breakwater and the elastic VLFS is formulated in a consistent manner. It has been shown numerically that the structural deflections of the VLFS can be reduced significantly by a suitably designed reverse T-shape floating breakwater.     

Numerical study of the motions and drift force of a floating OWC device

The motion and the drift force of a floating OWC (oscillating water column) wave energy device in regular waves are studied taking account of the oscillating surface-pressure due to the pressure drop across the duct of the air chamber. The potential problem inside the chamber is formulated by making use of the Green integral equation associated with the Rankine-type Green function while the outer problem with the Kelvin-type Green function. The added mass, wave damping and excitation coefficients as well as the motion and drift force of the OWC device are calculated for various values of parameter related to the pressure drop.     

165°E赤道太平洋溶解氧垂直分布异常分析

根据1986—1990中美热带西太平洋海气相互作用8个航次合作综合调查资料，分析了1987年10月赤道中西太平洋165°E（10°N－6°S）次表层水形成溶解氧最大值的原因。1986－1987年E1Nino衰退时期，该海域赤道附近在E1Nino强盛时期下沉的次表层水开始回升，短时期内形成了类似于中、高纬度海域的理化环境，使浮游生物在混合层内聚集生长，最终导致溶解氧含量在次表层出现最大值和过饱和含量。     

Prediction of local scour around circular piles under waves using a novel artificial intelligence approach

Abstract

The scour phenomena around vertical piles in oceans and under waves may influence the structure stability. Therefore, accurately predicting the scour depth is an important task in the design of piles. Empirical approaches often do not provide the required accuracy compared with data mining methods for modeling such complex processes. The main objective of this study is to develop three data-driven methods, locally weighted linear regression (LWLR), support vector machine (SVR), and multivariate linear regression (MLR) to predict the scour depth around vertical piles due to waves in a sand bed. It is the first effort to develop the LWLR to predict scour depth around vertical piles. The models simulate the scour depth mainly based on Shields parameter, pile Reynolds number, grain Reynolds number, Keulegan–Carpenter number, and sediment number. 111 laboratory datasets, derived from several experimental studies, were used for the modeling. The results indicated that the LWLR provided highly accurate predictions of the scour depths around piles (R?=?0.939 and RMSE = 0.075). Overall, this study demonstrated that the LWLR can be used as a valuable tool to predict the wave-induced scour around piles.     

试论东海陆架盆地的基底构造演化和盆地形成机制

本文主要根据东海陆架盆地和周边的地质、地球物理资料,分析盆地的基底岩性特征、结构特征。认为东海陆架盆地的基底除元古界片麻岩外,还分布有一定范围的中生界及古生界。基底构造特征是纵向上多层次,横向上不均一,南北有别,东西分带。构造演化上经历了张、合、压、扭等复杂过程。     

珠江口沉积物酸挥发性硫化物与重金属生物毒性的研究

研究了2003年10月采于珠江口5个站位的沉积物剖面酸挥发性硫化物(AVS)和同时提取的重金属(SEM:Pb,Zn,Cu,Cd,Ni)。其中,站位1、2位于中滩,其沉积物的AVS含量变化范围较小,为0.25—4.06μmol.g-1;站位3、4位于西滩,其沉积物的AVS含量变化范围较大,为0—26.09μmol.g-1。中滩和西滩沉积物的AVS含量均随深度增加。西滩表层沉积物的AVS含量接近于零,这可能与该水域较强的底层流和沉积物的再悬浮作用有关。站位5位于珠江口外侧,其表层沉积物的AVS含量相对较高,且垂向变化较小,可能是还原性沉积物间歇性再悬浮后重新沉积的结果。站位1、2和5沉积物中同时提取的重金属含量大体在0.95±0.2μmol.g-1范围内,随深度增加略呈下降趋势;而西滩沉积物重金属含量相对较高,为1.43—2.42μmol.g-1,且在一定深度范围内随深度增加呈明显下降的趋势,表明珠江口西滩沉积物中的重金属污染有加重的趋势。对AVS/SEM摩尔比值和单个金属的毒性效应研究显示,珠江口内尤其是西滩的表层沉积物存在重金属污染,对其中生活的底栖生物具有潜在的毒性效应。     

Environmental control of growth and BChl a expression in an aerobic anoxygenic phototrophic bacterium, Erythrobacter longus (DSMZ6997)

1Introduction Aerobic anoxygenic phototrophic bacteria(AAPB) are facultative heterotrophs that can utilizelight for photosynthesis. These unique-functioningbacteria are widely distributed in marine environ-ments, such as coastal waters (Shiba et al., 1991…     

Numerical and experimental study on hydrodynamic interaction of side-by-side moored multiple vessels

This paper aims to investigate the basic interaction characteristics of side-by-side moored vessels both numerically and experimentally. A higher-order boundary element method (HOBEM) combined with generalized mode approach is applied to analysis of motion and drift force of side-by-side moored multiple vessels (LNG FPSO, LNGC and shuttle tankers). Model tests were carried out for the same floating bodies investigated in the numerical study in regular and irregular waves. Global and local motion responses and drift forces of three vessels are compared with those of calculations. Discussions is highlighted on applicability of numerical method to prediction of sophisticated multi-body interaction problem of which motion behavior is very important to analysis of mooring dynamics of deep sea floating bodies.     

Mechanical Characteristics of Light-Weighted Soils Using Dredged Materials

This study investigates the mechanical characteristics of light-weighted soils (LWS) consisting of expanded polystyrene (EPS), dredged clays, and cement through both unconfined and triaxial compression tests. The mechanical characteristics of the compressive strength of LWS are analyzed with varying initial water contents of dredged clays, EPS ratio, cement ratio, and curing pressure. In the triaxial compression test, it is found that the compressive strength of LWS associated with EPS is independent on the effective confining pressure. When both EPS ratio is less than 2% and cement ratio is more than 2%, the compressive strength rapidly decreases after the ultimate value. This signifies that the compressive strength-strain behavior is quite similar to that of the cemented soil. The ground improved by LWS has the compressive strength of 200 kPa associated with the optimized EPS ratio of 3-4% and initial water content of 165-175%. The ultimate compressive strength under both triaxial and unconfined compression tests is almost constant for a cement ratio of up to 2%.