脱气温度和样品粒径对致密砂岩低温氮气吸附实验结果的影响

基于静态体积法的低温氮气吸附实验已广泛用于分析致密储集层的孔隙结构。本文探索了脱气温度和样品粒径对松辽盆地高台子致密砂岩低温氮气吸附实验结果的影响。结果显示,110℃的脱气条件并不能清除束缚水而使得孔隙体积、比表面积均偏低,300℃的脱气条件容易破坏样品中黏土矿物的结构令孔隙体积、比表面积减小,200℃是比较合适的脱气温度,既能去除束缚水又不破坏黏土矿物结构。样品粒径从5～10目减小至10～30目,氮气探测的孔隙数量增多使比表面积、孔体积增大。从10～30目减小至180～200目,黏土矿物相对含量降低令比表面积、孔体积显著减小;小于200目的样品中减少的黏土矿物主要集中在大于200目的岩样中,因此大于200目岩样的测定结果最高。因此,10～30目是利用低温氮气吸附实验寻求分析致密砂岩储集层特征的最佳粒径范围。     

Urban forest loss using a GIS-based approach and instruments for integrated urban planning:A case study of Jo(a)o Pessoa,Brazil

Urban forests play an important role in the thermal comfort and overall life of local populations in large-and medium-sized cities.This study analyzes urban forest loss and maps land use and land cover (LULC) changes between 1991 and 2018 by evaluating the use of urban planning instruments for the mitigation of urban forest loss in Jo～o Pessoa,Brazil.For this purpose,satellite-derived LULC images from 1991,2006,2010 and 2018 and data on urban forest loss areas obtained using the Google Earth Engine were used.In addi-tion,this paper also discusses the instruments used for integrated urban planning,which are(a) the legal sector,responsibility and nature;(b) the urban expansion process;and (c) the elements of urban infrastructure.The results show a clear shift in land use in the study area.The major changes in LULC classes occurred in urban areas and herbaceous vegetation,while the greatest loss was in arboreal/shrub vegetation.Thus,an increase in the pressure to occupy zones intended for environmental preservation could be estimated.Our results showed similar accuracies with other studies and more spatial details.The characteristics of the patterns,traces,and hotspots of urban expansion and forest cover loss were explored.We highlighted the potential use of this proposed framework to be applied and validated in other parts of the world to help better understand and quantify various aspects of ur-ban-related problems such as urban forest loss mapping using instruments for integrated urban planning and low-cost approaches.     

基于纹理合成的三维地形水墨风格渲染研究

提出了基于纹理合成的三维地形水墨风格渲染的方法,以规则格网DEM为数据源,基于OSG进行三维地形建模,在此基础上提取山体特征线,然后生成一幅灰度控制图像。对Efros01纹理合成算法进行改进,利用灰度控制图像指导水墨纹理的合成,将得到的纹理图像映射到三维地形上,实现对三维地形的水墨风格渲染,通过对水墨纹理样本的选择和纹理合成参数的设置能够实现对纹理合成过程的交互控制。结果表明,该渲染方法对三维地形的水墨风格渲染具有较好的效果。     

A Research Synthesis and Theoretical Model of Relationships Between Factors Influencing Outdoor Domestic Water Consumption

Outdoor domestic water use is often targeted by demand management strategies. However, despite a rich empirical evidence base coming from primary studies, it is still unclear how factors that influence this type of demand interact and which are the most suitable to be addressed by water conservation programs. Based on 423 scientific contributions, we develop a research synthesis combining a variety of techniques to create a theoretical model of the relationships among factors most consistently observed in the literature. The findings uncover a great degree of complexity in terms of interactions between spatial-structural, social-structural, and cultural and psychological factors at different scales. For researchers, the methodology and the outcomes can be useful to better frame existing and future research within the literature on the topic. In practice, the adaptation of the theoretical model to local specificities can facilitate the design of more efficient and integrated demand management strategies.     

油气无机成因学说的新进展

介绍了油气无机成因学说的新发展,主要是目前在西方、俄罗斯等影响较大的关于无机生油气的几个学派以及在中国的一些学派。其中之一是Ｇｏｌｄ氏的地幔脱气理论,之二是费－托地质合成理论。     

LBS导航认知地图服务系统设计与实现

科技发展改变了电子地图制作和使用环境。本文在分析传统大数据量地图形式在LBS中的应用缺陷后,提出了符合用户需求和移动终端条件的认知地图可视化方案,这种不同于传统制图综合原则制作的认知地图能有效缓解目前在LBS应用中存在的地图数据与屏幕大小的矛盾,适应了移动环境下用户的多行为状态和终端硬件特点。     

Variability in the speciation of iron in the northern North Sea

Variations in the speciation of iron in the northern North Sea were investigated in an area covering at least two different water masses and an algal bloom, using a combination of techniques. Catalytic cathodic stripping voltammetry was used to measure the concentrations of reactive iron (Fe_R) and total iron (Fe_T) in unfiltered samples, while dissolved iron (Fe_D) was measured by GFAAS after extraction of filtered sea water. Fe_R was defined by the amount of iron that complexed with 20 μM 1-nitroso-2-napthol (NN) at pH 6.9. Fe_T was determined after UV-digestion at pH 2.4. Concentrations of natural organic iron complexing ligands and values for conditional stability constants, were determined in unfiltered samples by titration. Mean concentrations of 1.3 nM for Fe_R, 10.0 nM for Fe_T and 1.7 nM for Fe_D were obtained for the area sampled. Fe_R concentrations increased towards the south of the area investigated, as a result of the increased influence of continental run off. Fe_R concentrations were found to be enhanced below the nutricline (below 40 m) as a result of the remineralisation of organic material. Enhanced levels of Fe_T were observed in some surface samples and in samples collected below 30 m at stations in the south of the area studied, thought to be a result of high concentrations of biogenic particulate material and the resuspended sediments respectively. Fe_D concentrations varied between values similar to those of Fe_T in samples from the north of the area to values similar to those of Fe_R in the south. The bloom was thought to have influenced the distribution of both Fe_R and Fe_T, but less evidence was observed for any influence on Fe_R and Fe_D. The concentration of organic complexing ligands, which could possibly include a contribution from adsorption sites on particulate material, increased slightly in the bloom area and in North Sea waters. Iron was found to be fully (99.9%) complexed by the organic complexing ligands at a pH of 6.9 and largely complexed (82–96%) at pH 8. The ligands were almost saturated with iron suggesting that the ligand concentration could limit the concentration of iron occurring as dissolved species.     

Production of methyl bromide and methyl chloride in laboratory cultures of marine phytoplankton II

Methyl halides (monohalomethanes), especially methyl bromide, are known to contribute significantly to ozone destruction in the stratosphere. Budgets of natural and anthropogenic methyl bromide suggest that marine organisms may be the source of a significant proportion of the total global production. Since phytoplankton are abundant in surface waters, they are obvious candidates. Cultures of nine phytoplankton species were grown in CO₂-enriched, nitrate-limited medium in sealed glass vessels. Species tested include Chaetoceros calcitrans, Isochrysis sp., Porphyridium sp., Synechococcus sp., Phaeodactylum tricornutum, Tetraselmis sp., Prorocentrum sp., Emiliania huxleyi and Phaeocystis sp. Methyl bromide (CH₃Br) and methyl chloride (CH₃Cl) concentrations were determined by bubbling the cultures with high-purity air, cryotrapping the effluent and analyzing it on a gas chromatograph with an electron capture detector. The Phaeocystis sp. samples were monitored with GCMS. Cell population, bacterial population, Chl a, pH, and nitrate concentration were monitored for periods of at least two weeks. CH₃Cl was produced by all cultures. CH₃Br was absent in Tetraselmis sp. and Isochrysis sp. cultures, but present in all the others. Methyl iodide (CH₃I) was present in most cultures but could not be quantified due to analytical limitations. CH₃I and CH₃Br production was fastest in stationary phase and continued long after cell division had ceased. Axeic cultures of Phaeocystis sp. achieved almost identical production rates of CH₃Cl and CH₃Br as xenic cultures of the same species. Species from tropical waters had faster CH₃Cl and CH₃Br production rates than temperate species. Scaling the observed production rates using global standing stock estimates for Chl a and particulate nitrogen indicate that phytoplankton can account for only a fraction of the CH₃Cl and CH₃Br believed to be produced in the ocean. Calculations based on the estimated global biomass of Phaeocystis sp. and E. huxleyi blooms show that their contribution is insignificantly small.     

片、粉状触媒合成腔体内压力、温度的变化分析

对比分析了片状触媒合成体系和粉状触媒合成体系,在金刚石合成过程中,合成腔体内压力、温度的变化情况,并结合金刚石合成特征区分布图,分析辽些压力、温度变化对合成金刚石品质的影响,由此,指出粉状触媒是合成金刚石用触媒材料的较佳形态。     

水声学方法对黄河口水下底坡失稳现象研究

对黄河三角洲东北部地区的高分辨率水声学资料进行了综合研究。根据所记录的破坏土体变形程度、运动产生的平面形状和地貌特征形态,对土体失稳过程进行分类：浅表土体变形、塌陷凹坑、滑坡和沉积物重力流。结果表明：（１）浅表土体形变的变形程度最低,出现在研究区斜坡上部平滑海底,主要为绳网状泄水构造和表层拉张裂隙。（２）塌陷凹坑在研究区内广泛出现,是局部土体液化后发生了垂直沉降的结果。（３）滑坡多发生在水下斜坡的中上部,由弧形塌陷区、狭窄的冲沟通道和负地形沉积物堆积区组成。滑坡陡坎后缘发现拉张裂隙。（４）沉积物重力流是土体发生变形程度最大,搬运距离最长的土体破坏变形形式。局部区域多次受到沉积物重力流切割和充填作用。