AHP及模糊综合评判法在路基长期稳定性评价中的应用

根据对一低液限粉土路基的现场工程地质调查及检测,确定了影响该路基长期稳定性的主要影响因素,并结合AHP法,应用两级模糊综合评判的方法对该路基的长期稳定性进行了评价。     

A review of the occurrence, form and origin of C-bearing species in the Khibiny Alkaline Igneous Complex, Kola Peninsula, NW Russia

The Khibiny Complex hosts a wide variety of carbon-bearing species that include both oxidized and reduced varieties. Oxidised varieties include carbonate minerals, especially in the carbonatite complex at the eastern end of the pluton, and Na-carbonate phases. Reduced varieties include abiogenic hydrocarbon gases, particularly methane and ethane, dispersed bitumens, solid organic substances and graphite. The majority of the carbon in the Khibiny Complex is hosted in either the carbonatite complex or within the so-called “Central Arch”. The Central Arch is a ring-shaped structure which separates khibinites (coarse-grained eudialite-bearing nepheline-syenites) in the outer part of the complex from lyavochorrites (medium-grained nepheline-syenites) and foyaites in the inner part. The Central Arch is petrologically diverse and hosts the major REE-enriched apatite–nepheline deposits for which the complex is best known. It also hosts zones with elevated hydrocarbon (dominantly methane) gas content and zones of hydrothermally deposited Na-carbonate mineralisation. The hydrocarbon gases are most likely the product of a series of post-magmatic abiogenic reactions. It is likely that the concentration of apatite-nepheline deposits, hydrocarbon gases and Na-carbonate mineralisation, is a function of long lived fluid percolation through the Central Arch. Fluid migration was facilitated by stress release during cooling and uplift of the Khibiny Complex. As a result, carbon with a mantle signature was concentrated into a narrow ring-shaped zone.     

对羟基苯甲酸异丙酯合成的研究

以浓硫酸为催化剂，研究了对羟基苯甲酸和异丙醇合成对羟基苯甲酸异丙酯的工艺条件。对影响产率的因素进行了探讨：实验表明，在以7％的浓硫酸为催化剂，反应温度为120℃，醇酸摩尔比为4：1，反应时间为5h的最佳条件下，合成了羟基苯甲酸异丙脂，通过多次重结晶的方法纯化产品，产率可达85．5％，并通过熔点仪、红外光谱等手段对产品加以表征，验证了产品具有较高的纯度。该法简单、快速、产率高、纯度好，具有较高的实用价值。     

Exhumation Paths of High-Pressure-Low-Temperature Metamorphic Rocks from the Lycian Nappes and the Menderes Massif (SW Turkey): a Multi-Equilibrium Approach

The Menderes Massif and the overlying Lycian Nappes occupy anextensive area of SW Turkey where high-pressure–low-temperaturemetamorphic rocks occur. Precise retrograde P–T pathsreflecting the tectonic mechanisms responsible for the exhumationof these high-pressure–low-temperature rocks can be constrainedwith multi-equilibrium P–T estimates relying on localequilibria. Whereas a simple isothermal decompression is documentedfor the exhumation of high-pressure parageneses from the southernMenderes Massif, various P–T paths are observed in theoverlying Karaova Formation of the Lycian Nappes. In the uppermostlevels of this unit, far from the contact with the MenderesMassif, all P–T estimates depict cooling decompressionpaths. These high-pressure cooling paths are associated withtop-to-the-NNE movements related to the Akçakaya shearzone, located at the top of the Karaova Formation. This zoneof strain localization is a local intra-nappe contact that wasactive in the early stages of exhumation of the high-pressurerocks. In contrast, at the base of the Karaova Formation, alongthe contact with the Menderes Massif, P–T calculationsshow decompressional heating exhumation paths. These paths areassociated with severe deformation characterized by top-to-the-eastshearing related to a major shear zone (the Gerit shear zone)that reflects late exhumation of high-pressure parageneses underwarmer conditions. KEY WORDS: exhumation; high-pressure–low-temperature metamorphism; multi-equilibrium P–T estimates; Lycian Nappes; Menderes Massif     

Material selection for the gas containment system of a compressed natural gas carrier fleet

In this work, the possible exploitation of fiber-reinforced composites in the context of maritime transportation of compressed natural gas (CNG) is investigated. In addition to a more conventional steel configuration, two different fiber materials, carbon and glass, are considered as construction materials for pressure vessels (PVs) to be stored on board ships, with thickness optimized by FEM analysis.The considered scenario is represented by the transportation of CNG from an offshore well to a terminal on shore. Fleets of ships carrying CNG in pressure vessels manufactured with the investigated materials are generated by means of a ship synthesis model (SSM) software and compared on the basis of technical and economical indicators.The choice of the construction material influences considerably the weight of the PVs, which represent a major item of total ship weight and reflects directly on the general transport performances in terms of resistance, seakeeping and reliability in the service. On the other hand, capital as well as operating expenditures are considerably affected by the choice. When exploring the design space, the ship synthesis model is able, at a preliminary stage of the design, to account for the various technical and economical aspects, their implications and relationships. Results are presented of computations carried out in a specific case, identified by the annual gas production and other characteristics of the well terminal and a cruising route for the ships. The comparison is carried out on the basis of the cost per transported unit of gas and of the percentage of success in the transportation process. The computations show that the choice of the PV material has a key influence on the results in terms of optimal number, dimensions and speed of the ships.     

渝东南地区下寒武统牛蹄塘组页岩孔径分布测试方法研究

低温氮气吸附法已普遍用于评价页岩的孔隙结构,但是文献中报道的脱气温度和脱气时间等测试条件不尽相同,此外测试结果中经常出现滞后环不闭合的情况,严重影响了孔径分布等结构参数测试的准确性。为了评价和探索有效的页岩孔径分布测试方法,本文选取渝科1井下寒武统牛蹄塘组黑色页岩,重点研究应用低温氮气吸附法分析其孔径分布的测试条件,系统探讨了样品质量、脱气温度、升温速率和脱气时间对测试结果的影响,通过进一步优化参数建立了可靠的孔径分布测试方法,并成功用于测定其他页岩样品。结果表明:吸附-脱附等温线呈反C型,属于Brunauer等提出的BDDT等温吸附曲线分类中的V型,滞后环完全闭合,属于IUPAC分类中的H4型,对应狭窄的狭缝型孔隙,说明此类页岩中除了含有峰值孔径主要集中在3.5~4.5 nm的中孔和一定数量的大孔外,还存在大量微孔。研究认为脱气温度是影响测试结果的主要因素。该研究是页岩孔径分布测试方法的一项补充,为我国页岩气的深入研究提供了关键参数支持。     

应用线性合成概率方法探讨青藏高原北部地区强震趋势

基于周期谱分析基础上的线性合成概率预测方法,对青藏高原北部地区Ms≥7.0、Ms≥6.5强震进行了试验性研究,并利用其结果作为预测依据,对青藏高原北部地区强震趋势做了初步估计.利用该方法,本文还对东昆仑断裂带1900年以来的Ms≥7.0强震进行了研究.     

2014年夏季长江流域持续性低温的大尺度环流异常

采用中国地面站气温逐日观测资料、NOAA全球逐日海表温度资料,及NCEP/NCAR的全球日均再分析资料,研究了2014年持续性低温的三维结构及大尺度环流异常。结果表明,2014年的低温异常,除了在陆地上区域性地出现在长江流域,还以大尺度带状的形式、从陆地延伸到海洋上。这种带状异常不只出现在近地面,在大气各层（925～500 hPa）都能看到。分析指出,大气中的这个低温带主要由高纬大气环流异常造成。在位势高度场上,最重要的异常出现在高纬60°N,有呈带状的位势高度正距平,它引导（距平意义上的）偏北气流从正北和东北偏东方向侵入,在其南侧形成一带状的偏低温区。大气各层均呈现出这种在高纬有位势高度正距平、相应地在稍南的低纬（40°N）有位势高度负距平、两者之间为低温区的分布特征。从低层往上,这种配置型式整体表现出由南往北的倾斜,其垂直剖面表现为距平意义上的、大尺度、类似于锋面的倾斜结构。文中用简单的概念模型对此进行理解,认为这种结构是由大气动力异常和热力异常相互影响、共同作用而形成的。     

山东省胶南市七宝山铅矿区地质矿产特征综合研究

胶南七宝山位于胶东半岛东部地区,区域上属于胶南-威海造山带.山东省地质调查院在此开展普查工作,并通过激电测深、土壤测量、钻孔取芯,以及化学和光谱等分析方法,得出铅矿矿体赋存于断裂构造中,属岩浆热液充填型.矿体主要呈脉状、凸镜状,宽1～3 m,长70～200 m,主要矿体走向近南北,多倾向东.矿石有用化学成分主要为Pb、Ag、CaF2、Cu,Pb含量一般为1.36%～3.96%(平均3.11%),矿体平均厚度3.13m.