固体粒子的稳泡机理

固体粒子是良好的稳泡剂，其稳泡作用实质是在气－水界面产生吸附，形成固态膜，固态膜致密性强，机械强度高，表面粘度大。固体粒子的润湿性能，粒子大小及形状对固态膜的牢固程度有很大影响。     

四川盆地西部富钾卤水水文地球化学特征及其成因意义探讨

四川盆地西部宫钾卤水以深层卤水形式赋存于地下４０００余ｍ的中三叠统雷口坡组四段（Ｔ２ｌ４）盐系的碳酸盐岩储层中。富钾卤水与海水不同浓缩阶段相比，其中含Ｋ＋含量异常高，构成液态钾矿资源；Ｂｒ－、Ｉ－、Ｂ（３＋）、Ｌｉ＋等稀有组分也远超过综合利用工业品位，为优质化工原料水。富钾卤水为沉积变质和钾盐溶滤的复合成因，具有固夜态找钾的指示意义。本文为四川盆地固液态找钾提供了有价值的线索。     

地层模型的三维实体显示与剖切

本文介绍了地层模型的三维实体显示的原理与方法，同时又提出了沿任意方向垂直剖切地层模型的一种实用有效算法，它已用于交互式三维地层矿床显示系统ＧＤ－３ＤＷＳ，是三维地质解释的很好工具     

Radon,Lung Cancer Risk and Environmental Geology in Gejiu Area

The incidence of lung cancer in the Gejiu area of Yunnan Province ranks the first in the world.The radon level(indoor,soil) was measured in the Gejiu area by the SSNTD method from 1990 to 1996,The result indicates an extensive high-level of indoor radon in that area though U and Th are lower in local limestones,The indoor radon level of houses located in the geologic fault zone is 6 times high that 2km far from the fault zone.The reason probably is that the radon level of soil in the fault is 6-8 times high that 1 km far from the faults.our data indicate that a lower range of radon levels,0-100Bq.m^-3,exists in healthy families.However,a higher radon level,over 800 Bq.m^-3,is often found corresponding to that of cancer patients‘ homes(the house-owners are suffering from either lung cancer or leukaemia or liver cancer),Obviously,an increase in lung cancer incidence follows an increase in indoor radon level,The risk of cancer induced by indoor radon is no longer an inference,but a fact.     

四川成都盆地某深层富钾卤水的地球化学特征及成因

本文报道了四川成都盆地某深层富钾层卤水的化学组成，氧、氢、硫和硼同位素组成以及２５℃等温蒸发析盐过程中，从卤水中获得的固相物质组成。在此基础上讨论了卤水的成因，认为该卤水是蒸发浓缩的海相卤水、非海相卤水以及埋藏成岩过程中封存卤水对地层中海相蒸发盐溶滤作用形成的混合水。     

格子Boltzmann方法地震波场模拟

格子Ｂｏｌｔｚｍａｎｎ方法是细胞自动机在某些学科中的具体化和应用。它根据微观运动过程的某些基本特征建立简化的、时间和空间完全离散的动力学模型，这种模型的平行行为符合宏观的微分方程。     

硅酸盐样品微波加热碱熔分解方法

本文研究了硅酸盐样品在常压下，用微波炉进行碱熔分解的熔样时间，试剂用量和滴加水量等情况对分解的影响，确定了最佳实验条件，将此法用于地球化学标准参考样品ＳｉＯ２的测定，取得了满意的结果。     

A comparative study on the illite crystallinity and the clay mineral reflectance spectral index for subdividing the very low-grade metamorphic belt along the Lizhou-Hekou geological section in the Youjiang sedimentary basin, Guangxi, China

To examine the application potential of hyperspectral remote sensing techniques in classifying very low-grade metamorphic belts, the composition of clay minerals and the cyrstallinity of illite from mudstones were measured using XRD and VIS-SWIR (400-2500 nm) reflectance spectroscopy. Based on the illite cyrstallinity, Kubler Index (KI), the Early Triassic LuoLou Group and the Middle Triassic lower Baifeng Formation were classified as the lower Epizone with KI△2θ° ranging from 0.22 to 0.25, the upper Baifeng Formation as upper anchizone with KI△2θ°ranging from 0.26 to 0.33, and the Hekou Formation as lower anchizone with KI△2θ° ranging from 0.38 to 0.40. According to a KI△2θ° value of 0.43, it is possible that there may exist a local diagenetic zone in the upper strata. The illite cyrstallinity Kubler index and the metamorphic grade increase from the bottom to the top of the stratigraphic sequence. The metamorphic grade boundaries nearly match the stratigraphic boundaries, indicating a burial metamorphism nature for the stratigraphic sequence. From the bottom to the top of the sequence, the spectral absorption band center of clay minerals from fresh rocks is around 2200 nm. The absorption band centers change towards shorter wavelengths: the Luolou Group being at 2220 nm, the Baifeng Formation at 2217-2213 nm, the lower member of the Hekou Formation at 2214-2206 nm, and the upper member of the Hekou Formation at 2205-2197 nm. The spectral absorption band center of illite shows the same change pattern. These results indicate that very low-grade metamorphic belts can be subdivided using spectral indices of clay minerals, which are measured by using field portable spectroradiometers. However, it may not work well with satellite and airborne sensors.     

Numerical simulations for coupled rock deformation and gas leak flow in parallel coal seams

Based on the new viewpoint of interaction mechanics for solid and gas, gas leakage in parallel deformable coal seams can be understood. That is, under the action of varied geophysical fields, the methane gas flow in a double deformable coal seam can be essentially considered to be compressible with time-dependent and mixed permeation and diffusion through a pore-cleat deformable, heterogeneous and anisotropic medium. From this new viewpoint, coupled mathematical models for coal seam deformation and gas leak flow in parallel coal seams were formulated and the numerical simulations for slow gas emission from the parallel coal seams are presented. It is found that coupled models might be close to reality. Meanwhile, a coupled model for solid deformation and gas leak flow can be applied to the problems of gas leak flow including mining engineering, gas drainage engineering and mining safety engineering in particular the prediction of the safe range using protective layer mining where coal and gas outbursts can efficiently be prevented. This revised version was published online in July 2006 with corrections to the Cover Date.     

Polymetallic Mineralization at the Suttsu Vein-type Deposit, Southwestern Hokkaido, Japan

Abstract. The Suttsu polymetallic vein-type deposit, hosted by tuff, tuff breccia and shale of the Miocene Kunnui Formation and propylitized hornblende-augite andesite, is located in southwestern Hokkaido, Japan. It has been exploited and explored for Cu, Pb, Zn and Ag until 1962.
In this study, we examined K-Ar ages, ore mineralogical characteristics and fluid inclusions to obtain new data for the deposit.
The K-Ar ages on sericite indicate that the polymetallic mineralization occurred in Late Miocene (8.1–5.7 Ma). The polymetallic banded ore from the Ohkubo vein is characterized by an abundance of Au, Ag, Sn, Bi, in, Se and Te. These metals are mainly ascribed to electrum (30.3–37.8 atom% Ag), Se-bearing pavonite (8.5–9.5 wt% Se), gustavite-lillianite solid solution, Se-bearing bismuthinite (5.0–5.3 wt% Se), kawazulite, cassiterite, Sn-bearing chalcopyrite (3.3–4.2 wt% Sn), In-bearing stannite, stannite-chalcopyrite solid solution, and In- and Sn-bearing sphalerite (2.6–8.4 wt% In and 1.8–4.3 wt% Sn), occurring in narrow bands of the ore. The In- and Sn-bearing sphalerite likely forms a sphalerite-roquesite-stannite solid solution with the contents of roquesite and stannite being about 2–9 and 2-A mole%, respectively. Temperatures and salinities (in wt% NaCl equiv.) of the ore fluids are estimated to be 180-250C and 3–4 wt%, respectively. The Sn-bearing chalcopyrite therefore probably precipitated metastably. The geologic and mineralogical features suggest that pre-Tertiary basement rocks rich in organic material underlie the Miocene Kunnui Formation nearby the deposit and that they contributed to local and temporary reduction of magnetite-series magmas favorable for the early stage tin-polymetallic mineralization.