The tectono‐metamorphic evolution of the very low‐grade hangingwall constrains two‐stage gneiss dome formation in the Montagne Noire (Southern France)

The Montagne Noire in the southernmost French Massif Central is made of an ENE‐elongated gneiss dome flanked by Palaeozoic sedimentary rocks. The tectonic evolution of the gneiss dome has generated controversy for more than half a century. As a result, a multitude of models have been proposed that invoke various tectonic regimes and exhumation mechanisms. Most of these models are based on data from the gneiss dome itself. Here, new constraints on the dome evolution are provided based on a combination of very low‐grade petrology, K–Ar geochronology, field mapping and structural analysis of the Palaeozoic western Mont Peyroux and Faugères units, which constitute part of the southern hangingwall of the dome. It is shown that southward‐directed Variscan nappe‐thrusting (D₁) and a related medium‐P metamorphism (M₁) are only preserved in the area furthest away from the gneiss dome. The regionally dominant pervasive tectono‐metamorphic event D₂/M₂ largely transposes D₁ structures, comprises a higher metamorphic thermal gradient than M₁ (transition low‐P and medium‐P metamorphic facies series) and affected the rocks between c. 309 and 300 Ma, post‐dating D₁/M₁ by more than 20 Ma. D₂‐related fabrics are refolded by D₃, which in its turn, is followed by dextral‐normal shearing along the basal shear zone of both units at c. 297 Ma. In the western Mont Peyroux and Faugères units, D₂/M₂ is largely synchronous with shearing along the southern dome margin between c. 311 and 303 Ma, facilitating the emplacement of the gneiss dome into the upper crust. D₂/M₂ also overlaps in time with granitic magmatism and migmatization in the Zone Axiale between c. 314 and 306 Ma, and a related low‐P/high‐T metamorphism at c. 308 Ma. The shearing that accompanied the exhumation of the dome therefore was synchronous with a peak in temperature expressed by migmatization and intrusion of melts within the dome, and also with the peak of metamorphism in the hangingwall. Both, the intensity of D₂ fabrics and the M₂ metamorphic grade within the hangingwall, decrease away from the gneiss dome, with grades ranging from the anchizone–epizone boundary to the diagenetic zone. The related zonation of the pre‐D₃ metamorphic field gradients paralleled the dome. These observations indicate that D₂/M₂ is controlled by the exhumation of the Zone Axiale, and suggest a coherent kinematic between the different crustal levels at some time during D₂/M₂. Based on integration of these findings with regional geological constraints, a two‐stage exhumation of the gneiss dome is proposed: during a first stage between c. 316 and 300 Ma dome emplacement into the upper crust was controlled by dextral shear zones arranged in a pull‐apart‐like geometry. The second stage from 300 Ma onwards was characterized by northeast to northward extension, with exhumation accommodated by north‐dipping detachments and hangingwall basin formation along the northeastern dome margin.     

Improved spatial delineation of streambed properties and water fluxes using distributed temperature sensing

A new method was developed for analysing and delineating streambed water fluxes, flow conditions and hydraulic properties using coiled fibre‐optic distributed temperature sensing or closely spaced discrete temperature sensors. This method allows for a thorough treatment of the spatial information embedded in temperature data by creating a matrix visualization of all possible sensor pairs. Application of the method to a 5‐day field dataset reveals the complexity of shallow streambed thermal regimes. To understand how velocity estimates are affected by violations of assumptions of one‐dimensional, saturated, homogeneous flow and to aid in the interpretation of field observations, the method was also applied to temperature data generated by numerical models of common field conditions: horizontal layering, presence of lateral flow and variable streambed saturation. The results show that each condition creates a distinct signature visible in the triangular matrices. The matrices are used to perform a comparison of the behaviour of one‐dimensional analytical heat‐tracing models. The results show that the amplitude ratio‐based method of velocity calculation leads to the most reliable estimates. The minimum sensor spacing required to obtain reliable velocity estimates with discrete sensors is also investigated using field data. The developed method will aid future heat‐tracing studies by providing a technique for visualizing and comparing results from fibre‐optic distributed temperature sensing installations and testing the robustness of analytical heat‐tracing models. Copyright © 2016 John Wiley & Sons, Ltd.     

River evaporation,condensation and heat fluxes within a first‐order tributary of Catamaran Brook (New Brunswick,Canada)

Stream temperature plays an important role in many biotic and abiotic processes, as it influences many physical, chemical and biological properties in rivers. As such, a good understanding of the thermal regime of rivers is essential for effective fisheries management and the protection aquatic habitats. Moreover, a thorough understanding of underlying physical processes and river heat fluxes is essential in the development of better and more adaptive water temperature models. Very few studies have measured river evaporation and condensation and subsequently calculated corresponding heat fluxes in small tributary streams, mainly because microclimate data (data collected within the stream environment) are essential and rarely available. As such, the present study will address these issues by measuring river evaporation and condensation in tributary 1 (Trib 1, a small tributary within Catamaran Brook) using floating minipans. The latent heat flux and other important fluxes were calculated. Results showed that evaporation was low within the small Trib 1 of Catamaran Brook, less than 0.07 mm day^?1. Results showed that condensation played an important role in the latent heat flux. In fact, condensation was present during 34 of 92 days (37%) during the summer, which occurred when air temperature was greater than water temperature by 4–6 °C. Heat fluxes within this small stream showed that solar radiation dominated the heat gains and long‐wave radiation dominated the heat losses. © 2015 Her Majesty the Queen in Right of Canada. Hydrological Processes. © 2015 John Wiley & Sons, Ltd.     

Evaluation of distributed BMPs in an urban watershed—High resolution modeling for stormwater management

The urban environment modifies the hydrologic cycle resulting in increased runoff rates, volumes, and peak flows. Green infrastructure, which uses best management practices (BMPs), is a natural system approach used to mitigate the impacts of urbanization onto stormwater runoff. Patterns of stormwater runoff from urban environments are complex, and it is unclear how efficiently green infrastructure will improve the urban water cycle. These challenges arise from issues of scale, the merits of BMPs depend on changes to small‐scale hydrologic processes aggregated up from the neighborhood to the urban watershed. Here, we use a hyper‐resolution (1 m), physically based hydrologic model of the urban hydrologic cycle with explicit inclusion of the built environment. This model represents the changes to hydrology at the BMP scale (~1 m) and represents each individual BMP explicitly to represent response over the urban watershed. Our study varies both the percentage of BMP emplacement and their spatial location for storm events of increasing intensity in an urban watershed. We develop a metric of effectiveness that indicates a nonlinear relationship that is seen between percent BMP emplacement and storm intensity. Results indicate that BMP effectiveness varies with spatial location and that type and emplacement within the urban watershed may be more important than overall percent.     

Inferring air–water temperature relationships from river and catchment properties

Water temperature (Tw) is a key determinant of freshwater ecosystem status and cause for concern under a changing climate. Hence, there is growing interest in the feasibility of moderating rising Tw through management of riparian shade. The Loughborough University Temperature Network (LUTEN) is an array of 36 water and air temperature (Ta) monitoring sites in the English Peak District set‐up to explore the predictability of local Tw, given Ta, river reach, and catchment properties. Year 1 of monitoring shows that 84%–94% of variance in daily Tw is explained by Ta. However, site‐specific logistic regression parameters exhibit marked variation and dependency on upstream riparian shade. Perennial spring flows in the lower River Dove also affect regression model parameters and strongly buffer daily and seasonal mean Tw. The asymptote of the models (i.e. maximum expected Tw) is particularly sensitive to groundwater inputs. We conclude that reaches with spring flows potentially offer important thermal refuges for aquatic organisms against expected long‐term warming of rivers and should be afforded special protection. Copyright © 2013 John Wiley & Sons, Ltd.     

基于温度植被干旱指数的电网输电线路走廊干旱分析

以湖北省输电线路走廊地区作为研究区,利用2013年1~9月MODIS卫星影像数据,处理得到月尺度的归一化植被指数(Normalized Differential Vegetation Index,NDVI)与地表温度(Land Surface Temperature,LST)数据,构建NDVI-Ts特征空间,计算得到温度植被干旱指数(Temperature Vegetation Dryness Index,TVDI),用TVDI监测结果分析湖北省输电线路走廊区域2013年干旱时空分布情况。结果表明,湖北省输电线路走廊地区TVDI和土壤含水量之间存在显著的负相关,相关系数达到0.525(p0.05),由MODIS卫星影像计算得到TVDI影像可以有效表明湖北省输电线路走廊地区的土壤含水情况。     

中国北方地区秋季植被变化及对气候变化的响应研究

基于1982~2006年的AVHRR GIMMS NDVI数据,使用一元线性回归和分段线性回归等方法,通过对中国北方地区植被变化及其与气候因子的关系研究,揭示该地区近25年来在不同时段的植被变化趋势及对气候变化的响应规律,从而为该地区的生态环境变化研究提供理论依据。研究结果表明:1)中国北方地区秋季植被在25年时间内整体呈上升趋势。秋季NDVI在秋季温度断点之前以上升趋势为主,秋季NDVI在秋季温度断点之后仍以上升趋势为主,但上升趋势有所放缓。2)通过分段线性回归方法和相关分析研究得出中国北方地区秋季温度是秋季NDVI变化的主要驱动力。在秋季温度断点之后,秋季温度仍呈上升趋势而降水呈显著减少的面积增多,从而在温度和降水双重影响下的干旱胁迫导致植被下降;当秋季温度下降而秋季降水增多时干旱发生概率变小,从而使秋季NDVI呈上升趋势。     

PMODTRAN: a parallel implementation based on MODTRAN for massive remote sensing data processing

MODerate resolution atmospheric TRANsmission (MODTRAN) is a commercial remote sensing (RS) software package that has been widely used to simulate radiative transfer of electromagnetic radiation through the Earth's atmosphere and the radiation observed by a remote sensor. However, when very large RS datasets must be processed in simulation applications at a global scale, it is extremely time-consuming to operate MODTRAN on a modern workstation. Under this circumstance, the use of parallel cluster computing to speed up the process becomes vital to this time-consuming task. This paper presents PMODTRAN, an implementation of a parallel task-scheduling algorithm based on MODTRAN. PMODTRAN was able to reduce the processing time of the test cases used here from over 4.4 months on a workstation to less than a week on a local computer cluster. In addition, PMODTRAN can distribute tasks with different levels of granularity and has some extra features, such as dynamic load balancing and parameter checking.