电容测试法判断测井电缆系统故障

测井电缆因长途颠簸、拉伸及绞车缠绕挤压,电缆连接器、电缆、绞车滑环、滑环连线等部位极易出现故障。电容测试法是一种简易、快速的检测方法,该法可在现场准确诊断出故障电缆的位置。以四芯铠装电缆为例,每根缆芯的正常阻值约为80Ω/1 000m,两缆芯间的分布电容约为170PPF/1 000m。在实际检测中,根据电容较小时测点的位置,可以有效判断故障部位;而电缆故障位置则可利用电阻及电容的线性关系进行计算予以确定。     

Earthquake rupture complexity due to dynamic nucleation and interaction of subsidiary faults

We numerically study the dynamic interaction of propagating cracks. It is assumed that propagating cracks can nucleate and drive subsidiary cracks because of shear strain enhancement near the propagating crack tips. The critical strain fracture criterion is assumed in the analysis. Intense interaction is expected to occur among the cracks. All the cracks are assumed to be parallel and antiplane strain deformation is assumed in the computation.In the interaction of two non-coplanar cracks, a strain shadow is formed in the neighborhood of each crack because of the strain release by the introduction of the crack. The growth of each crack is accelerated when the propagating tips of each crack are outside of the strain shadow of the other crack. In general, the crack tips enter the strain shadow, and the crack tips decelerate. The calculation shows that only one of the two cracks can continue to grow, and the other's growth is decelerated and arrested. If we can assume that the suite of cracks interact in a pairwise manner only, then this may suggest that only a limited number of cracks can continue to grow during the final stage of the rupture process. Hence the crack interaction causes complexity in dynamic earthquake faulting. The concepts of barrier and asperity have been employed by many researchers for the interpretation of complex seismic wave data. However, the physical realities of such concepts are obscure. Our calculations show that dynamic crack interactions can produce barriers and asperities in some cases; the crack tip deceleration or arrest due to the interactions among non-coplanar cracks can be interpreted as being due to a barrier. The dynamic coalescence among the coplanar cracks can be regarded as an asperity.Umeda found a localized area that strongly radiates high-frequency seismic waves in the epicentral areas of some large shallow earthquakes. He defined this as an earthquake bright spot. Our analysis implies that only a limited number of cracks continue to grow when many interactive cracks nucleate, and that all other cracks stop extending soon after nucleation. Hence, if the nucleation and termination of several cracks occur in a localized area, it will be observed seismologically as an earthquake bright spot. This is because it is theoretically known that the sudden termination of crack growth and dynamic crack coalescence efficiently emits high-frequency elastic waves.     

热液成矿作用的地质地球化学动力学——以胶东牟平-乳山金矿带为例

通过对胶东牟平—乳山热液脉状金,铅锌矿床成矿动力学控制规律的研究,说明了建立热液成矿反应体系的方法,并得出以下认识:（1）区域断裂构造活动,通过影响成矿反应体系的热力学性质和条件,控制元素的富集和分散。（2）热液成矿过程中容矿断裂活动可划分为两种作用方式:脆性破裂和韧—脆性张开,构成热液成矿的两种构造动力学环境。（3）热液成矿反应体系是一种开放的动态的热力学体系。断裂的脆性破裂阶段,使体系处于强烈的过饱和状态,矿质在远离平衡状态下快速结晶,加剧物质分异;在脆—韧性张开阶段,矿质在接近平衡态体系中缓慢晶出。（4）热液演化晚期,金在残余溶液中富集;当断裂再次发生构造脉动震颤时,早期形成的块状黄铁矿矿石碎裂,富金溶液充填其中,形成含裂隙金和晶隙金的富矿石。成矿体系热力学演化与构造动力学条件有利的匹配控制着富矿石的形成。     

鲁23井“动水位”观测的分析

本文介绍了鲁23井“动水位”观测情况。提出了一个分析有泄流的“动水位”的新方法,即把流量换算成水位,以等效静水位来表示“动水位”与流量。由于把“动水位”与流量用一个量来计算,从而为“动水位”观测定量的、统一的分析研究提供了新的方法。这对提高“动水位”井的监测预报地震能力起一定的作用。 本文还以鲁23井“动水位”观测资料为例,利用新方法进行处理的观测分析结果与理论研究结果是一致的。     

Strain analysis in Jurassic argillites of the Monte Sirino area (Lagonegro Zone,southern Apennines,Italy) and implications for deformation paths in pelitic rocks

Analysis of strain in Jurassic argillites forming part of the folded and thrusted sedimentary succession of the Lagonegro basin (southern Italian Apennines) has been carried out using ellipsoid-shaped reduction spots as strain markers. Most of the determined finite strain ellipsoids are of oblate type and show a peculiar distribution of the maximum extension direction (X), with maxima either subparallel or subperpendicular to the local fold axes. Using the strain matrix method, two different deformation histories have been considered to assist the interpretation of the observed finite strain pattern. A first deformation history involved vertical compaction followed by horizontal shortening (occurring by a combination of true tectonic strain and volume loss), whereby all strain is coaxial and there is no change in the intermediate axis of the strain ellipsoid. By this type of deformation sequence, which produces a deformation path where total strain moves from the oblate to the prolate strain field and back to the oblate field, prolate strain ellipsoids can be generated and may be recorded where tectonic deformation has not been large enough to reverse pretectonic compaction. This type of deformation history may be of local importance within the study area (i.e. it may characterize some fold hinge regions) and, more generally, is probably of limited occurrence in deformed pelitic rocks. A second deformation sequence considered the superposition of pre-tectonic compaction and tectonic strain consisting of initial layer-parallel shortening followed by layer-parallel shear (related to flexural folding). Also in this instance, volume change during tectonic deformation and tectonic plane strain have been assumed. For geologically reasonable amounts of volume loss due to compaction and of initial layer-parallel shortening, this type of deformation history is capable of producing a deformation path entirely lying within the oblate strain field, but still characterized by a changeover, during deformation, of the maximum extension axis (X) from a position parallel to the fold axis to one perpendicular to it. This type of deformation sequence may explain the main strain features observed in the study area, where most of the measured finite strain ellipsoids, determined from the limb regions of flexural folds, display an oblate shape, irrespective of the orientation of their maximum extension direction (X) with respect to the local structural trends. More generally, this type of deformation history provides a mechanism to account for the predominance of oblate strains in deformed pelitic rocks.     

Comparison of two methods for seismic hazard assessment in a low-seismicity area

The EGO method, developed by Egozcue et al. and the SRAMSC method, originally developed by Cornell and later programmed by McGuire, to assess the seismic hazard, are compared for the low seismicity area Belgium, The Netherlands, and NW Germany. Using the same input data, the results of the EGO method without the majority criterion and the SRAMSC method with upper bound XII agree very well. The influence of the zoning is investigated for the EGO method. It is not necessary to define the zones for the EGO method so strictly as for the SRAMSC method, but too wide zones can give bad results.     

近45 a来中国西北年极端高、低温的变化及对区域性增暖的响应

利用中国西北五省(区)1960-2004年129个台站逐日最低、最高温度资料,从中统计出年极端高温发生频次、年极端低温发生频次、年极端高温强度、年极端低温强度以及年极端高温和低温开始和结束日期,分析了它们近45 a来的变化情况。结果表明:近45 a来中国西北年极端高温发生频次的增加趋势是明显的,而年极端低温发生频次的减少趋势更显著;中国西北近45 a来年极端高温的强度在不断增强,而极端低温的强度在不断减弱;近45 a来中国西北年极端高温开始日期逐渐提前,结束日期逐渐推迟,而年极端低温的开始日期在逐渐推迟,结束日期在逐渐提前;年极端低温发生频次的减少对于西北区域增暖的响应比年极端高温发生频次增加更显著,而年极端低温强度的减弱要比年极端高温强度的增强对西北区域性增暖的响应偏弱,年极端高温发生频次的增加同年极端高温强度的增强对西北区域性增暖的响应程度基本相当。     

Uniaxial compression and tension tests of anthracite and loading rate dependence of peak strength

The mechanical characteristics of coal under uniaxial compressive stress and uniaxial tensile stress are key factors in investigations of the stability of galleries and coal faces, and are vital considerations for the efficient design of coalmines, disaster prevention, and environmental preservation. These mechanical characteristics have long been a topic of research, but remain insufficiently understood. In this study we performed uniaxial compression tests and uniaxial tension tests on coal, with particular attention to two concerns. The first was to measure the loading rate dependence of the peak strength of coal. Coal shows high sample-to-sample scatter in strength; test methods that are successful in comparatively homogeneous rock types cannot be used for coal. We therefore used an alternative test method that was recently developed by the authors. Anthracite samples were subjected to alternating slow and fast strain rates. Measured variations in stress during this process were used to estimate the loading rate dependence of peak strength. The second objective was to obtain complete stress–strain curves for coal under uniaxial tensile stress. It is difficult to hold samples secure during a tensile test; consequently, such curves have yet to be obtained. This study presents a successful application of the authors' method to the analysis of coal samples, yielding a complete stress–strain curve under tensile stress. The two methods presented here hold promise for application not only to anthracite but also to a wide variety of coals. It is possible to derive the values of the constants used in constitutive equations from the obtained experimental results. Once these equations are determined, they can be incorporated into finite-element software to investigate various time-dependent behaviors of coal and aid in the efficient design of coalmines and the prevention of subsidence and mine disasters.     

Effects of low molecular weight organic acids on sorption and desorption behavior of p-chlorophenol by yellow earth

Low molecular weight organic acids （LMWOAs） are important components of root exudates. They play an important role in immobilizing and remobilizing contaminants in rhizospheric soil. Effects of four LMWOAs on the sorption and desorption behavior of p-chlorophenol by yellow earth was studied in batch mode. The results showed that the previous application of LMWOAs to enhanced adsorption capacity of p-chlorophenol of the soil in the order of maleic acid〉malic acid〉oxalic acid〉citric acid. However, when LMWOAs were applied to soil where p-chlorophenol had been previously adsorbed, substantial p-chlorophenol was desorbed from soil by oxalic acid, whereas citric acid, malic acid and maleic acid didn＇t desorb as much p-chlorophenol from soil as deionized water.