江苏海域动态监管业务运行现状及分析

海域动态监管业务是实施海域管理精细化、科学化的重要手段。文章从海域监管工作模式、海域使用动态监测、海域资源调查、分析评价与决策支持成果等方面对江苏海域动态监视监测业务进行梳理,以期为全国海域动态监管业务化拓展提供参考。     

金属矿山岩移与工程稳定性研究及动态预测

针对金川矿区控制性工程所潜在的安全隐患,首先明确了影响矿区控制性工程稳定的主要因素是采动影响,提出了开展岩移规律与动态预测研究的必要性;然后,论述了国内外岩移规律研究的现状及发展趋势,提出了该课题研究的主要研究内容以及关键技术;最后产生影响了课题研究采用的理论与技术方法.     

浅埋隧道塌方地质灾害成因及风险控制

塌方是浅埋隧道施工过程中的主要地质灾害之一,利用风险动态评估模型及风险规避方法进行实时控制是确保隧道施工安全的有效途径。首先,采用洞内外相结合的地质调查方法,分析隧址区地质特征及塌方灾害风险诱因,并建立浅埋隧道塌方风险模糊层次评价模型,进行基于孕险环境的静态风险评估;其次,根据隧道施工过程中揭露的动态信息,对孕险环境进行动态修正,并汲取大气降水、开挖支护措施及监控量测等施工信息,进行隧道施工过程中的动态风险评估;最后,基于动态评估结果提出了风险规避方法,通过对施工方案的审核和优化,达到逐渐降低隧道施工风险、规避地质灾害的目的。该方法成功应用于宜巴高速公路段家屋隧道施工过程中,有效地规避了塌方地质灾害的发生,可为同类工程所借鉴。     

加速遗传算法在地下水位动态分析中的应用

提出了一种改进的遗传算法－加速遗传算法,分析了它的原理,控制参数的设置,收敛性,全局优化性能和适用性,并把它成苗地应用于地下水位动态分析中。     

烃类物质微渗漏机制及垂向运移的数值模拟

在前人烃类物质微渗漏机制研究基础上,建立了烃类物质微渗漏的概念模型,并且推导了烃类物质垂向运移的动力学模型。在动力学模型的基础上,通过数值模拟验证了烃类物质胶体气泡上升机制的合理性,并计算了不同情况下烃类物质垂向运移的平衡时间,进一步验证了烃类物质气泡上升机制满足运移速度快、流量少的特点。     

塔里木盆地塔中低凸起地层水化学特征对不整合的响应

对塔中低凸起地层水化学特征与不整合之间关系的研究结果表明,地层水化学特征对不整合具有很好的响应。在遭受强烈抬升和剥蚀、之间形成不整合的奥陶系和志留系,以及紧靠不整合面附近的石炭系CⅢ油组,其地层水具有矿化度、Cl-含量、K Na 含量和r(Cl-Na)/rMg值相对较小,而HCO3-含量、rNa/rCl值和rSO42-×100/rCl值相对较大的特点,反映出地质历史时期大气降水的影响。在志留系与石炭系之间以及志留系与奥陶系之间的不整合面附近,地层水的矿化度、r(Cl-Na)/rMg值和B3 含量变小,而rNa/rCl值和rSO24-×100/rCl值变大,具有典型的遭受大气淋滤的地层水化学基本特征。     

Effect of gravity framing on the overstrength and collapse capacity of steel frame buildings with perimeter special moment frames

This paper investigates the effect of the gravity framing system on the overstrength and collapse risk of steel frame buildings with perimeter special moment frames (SMFs) designed in North America. A nonlinear analytical model that simulates the pinched hysteretic response of typical shear tab connections is calibrated with past experimental data. The proposed modeling approach is implemented into nonlinear analytical models of archetype steel buildings with different heights. It is found that when the gravity framing is considered as part of the analytical model, the overall base shear strength of steel frame buildings with perimeter SMFs could be 50% larger than that of the bare SMFs. This is attributed to the gravity framing as well as the composite action provided by the concrete slab. The same analytical models (i) achieve a static overstrength factor, Ω_s larger than 3.0 and (ii) pass the collapse risk evaluation criteria by FEMA P695 regardless of the assigned total system uncertainty. However, when more precise collapse metrics are considered for collapse risk assessment of steel frame buildings with perimeter SMFs, a tolerable probability of collapse is only achieved in a return period of 50 years when the perimeter SMFs of mid‐rise steel buildings are designed with a strong‐column/weak‐beam ratio larger than 1.5. The concept of the dynamic overstrength, Ω_d is introduced that captures the inelastic force redistribution due to dynamic loading. Steel frame buildings with perimeter SMFs achieve a Ω_d > 3 regardless if the gravity framing is considered as part of the nonlinear analytical model representation. Copyright © 2014 John Wiley & Sons, Ltd.     

A fuzzy dynamic flood routing model for natural channels

A fuzzy dynamic flood routing model (FDFRM) for natural channels is presented, wherein the flood wave can be approximated to a monoclinal wave. This study is based on modification of an earlier published work by the same authors, where the nature of the wave was of gravity type. Momentum equation of the dynamic wave model is replaced by a fuzzy rule based model, while retaining the continuity equation in its complete form. Hence, the FDFRM gets rid of the assumptions associated with the momentum equation. Also, it overcomes the necessity of calculating friction slope (S_f) in flood routing and hence the associated uncertainties are eliminated. The fuzzy rule based model is developed on an equation for wave velocity, which is obtained in terms of discontinuities in the gradient of flow parameters. The channel reach is divided into a number of approximately uniform sub‐reaches. Training set required for development of the fuzzy rule based model for each sub‐reach is obtained from discharge‐area relationship at its mean section. For highly heterogeneous sub‐reaches, optimized fuzzy rule based models are obtained by means of a neuro‐fuzzy algorithm. For demonstration, the FDFRM is applied to flood routing problems in a fictitious channel with single uniform reach, in a fictitious channel with two uniform sub‐reaches and also in a natural channel with a number of approximately uniform sub‐reaches. It is observed that in cases of the fictitious channels, the FDFRM outputs match well with those of an implicit numerical model (INM), which solves the dynamic wave equations using an implicit numerical scheme. For the natural channel, the FDFRM outputs are comparable to those of the HEC‐RAS model. Copyright © 2009 John Wiley & Sons, Ltd.     

Crustal structure beneath the Songpan—Garze orogenic belt

The Benzilan-Tangke deepseismic sounding profile in the western Sichuan region passes through the Song-pan-Garze orogenic belt with trend of NNE.Based on the travel times and the related amplitudes of phases in the record sections,the 2-D P-wave crustal structure was ascertained in this paper.The velocity structure has quite strong lateral variation along the profile.The crust is divided into 5layers,where the first,second and third layer belong to the upper crust,the forth and fifth layer belong to the lower crust.The low velocity anomaly zone gener-ally exists in the central part of the upper crust on the profile,and it integrates into the overlying low velocity basement in the area to the north of Ma‘erkang.The crustal structure in the section can be divided into 4parts:in the south of Garze-litang fault,between Garze-Litang fault and Xianshuihe fault,between Xianshuihe fault and Longriba fault and in the north of Longriba fault,which are basically coincided with the regional tectonics division.The crustal thickness decreases from southwest to northeast along the profile,that is ,from62km in the region of the Jinshajiang River to 52km in the region of the Yellow River.The Moho discontinuity does not obviously change across the Xianshuihe fault basesd on the PmP phase analysis.The crustal average velocity along the profile is lower,about 6.30 km/s.The Benzilan-Tangke profile reveals that the crust in the study area is orogenic.The Xianshuihe fault belt is located in the central part of the profile,and the velocity is positive anomaly on the upper crust,and negative anomaly on the lower crust and upper mantle.It is considered as a deep tectonhic setting in favor of strong earthquake‘s accumulation and occurrence.     

Influence of the Kunlun Mountain Ms8.1 Earthquake on Horizontal Crustal Deformation in the Sichuan and Yunnan Area

In order to track the space-time variation of regional strain field holistically(in a large scale) and to describe the regional movement field more objectively,the paper uses a nonlinear continuous strain model focused on extracting medium-low frequency strain information on the basis of a region with no rotation.According to the repeated measurements(1999～2001～2004) from GPS monitoring stations in the Sichuan and Yunnan area obtained by the Project of "China Crust Movement Measuring Network",and with the movement of 1999～2001(stage deformation background) as the basic reference,we separated the main influencing factors of the Kunlun Mountain M-S8.1 earthquake in 2001 from the data of 2001 and 2004,and the results indicate:(1) the Kunlun Mountain M-S8.1 earthquake has a discriminating effect on the Sichuan and Yunnan area,moreover,the deformation mode and background had not only certain similitude but also some diversity;(2) The movement field before the earthquake was very ordinal,while after the earthquake,order and disorder existed simultaneously in the displacement field;The displacement quantities of GPS monitoring stations were generally several millimeters;(3) The principal strain field before earthquake was basically tensile in an approximate EW direction and compressive in the SN direction,and tension was predominant.After the earthquake,the principal strain field in the Sichuan area was compressive in the EW direction and tensile in the SN direction,and the compression was predominant.In the Yunnan area,it was tensional in the NE direction and compressive in the NW direction,and tension was predominant;(4) The surficial strain before the earthquake was dominated by superficial expansion,the contractive area being located basically in the east boundary of Sichuan and Yunnan block and its neighborhood.After the earthquake,the Sichuan area was surface contractive(the further north,the greater it was),and south of it was an area of superficial expansion.Generally speaking,the Kunlun Mountain M-S8.1 earthquake played an active role in the accumulation of energy in the Sichuan and Yunnan area.Special attention shall be focused on the segment of Xichang-Dongchuan and its neighborhood.