汛期HLAFS产品在低纬高原地区预报能力客观检验

为充分使用我国暴雨模式（ＨＬＡＦＳ）数值预报产品，该文对１９９６年汛期ＨＬＡＦＳ在低纬高原地区预报能力进行客观检验和效果分析。其结果表明，ＨＬＡＦＳ对高度、气温等形势场有较好预报能力；物理量预报中的动力要素场（垂直运动）和水汽要素场（水汽通量散度）能较好反映云南强降水过程，有较好参考价值，热力要素场（θｓｅ３００－θｓｅ７００）预报效果较差，在实际应用中应注意订正。     

“96.8”特大暴雨的中尺度对流云团特征

１９９６年８月３－５日河北省的西南部地区出现了特大暴雨过程。此次特大暴雨，主要是８６０８号台风登陆后减弱为低气压西北上，副热带高压加强西进，低层从东北部有弱冷空气扩散南下，在暴雨区域形成湿斜压锋区，触发不稳定能量释放，致使台我低压北方形成３个中尺度对流云团所致。     

培矮64S冷灌繁种技术研究

通过对低温敏核不育系培矮６４Ｓ育性敏感期间冷水处理后温度场分布特征和自交结实率的资料分析，得出培矮６４Ｓ的灌水始期是冷灌后的见穗期往前推１８天，终止期为见穗期往前推３天，灌水深度前１０天为１５ｃｍ，，后５天为２０ｃｍ，，为“冷繁”技术在生产上应用提供了理论依据。     

东北输油管道锦县,盖县,海城段地基土抗液化强度研究

对东北输油管道锦县，盖县，海城段的粉土细砂，中砂，粉砂进行了振动液化试验，取得了和类土的τｄ－ｌｏｇＮｆ曲线，τｄ／σ′－ｌｏｇＮｆ曲线，为在以上地区进行液化判别提供了重要的基础资料，同时也为研究其它的地区相同土质的振动性能提供借鉴。     

地表潮汐应变观测的响应比及特征

运用非线性系统加卸载响应比理论，研究了潮汐应变观测的响应比特征，解决了响应比理论应用中的两个基础问题：加、卸载荷的计算和潮汐前兆观测中加卸载响应比的计算模型选择潮汐应变观测中的一些潮汐和非潮汐的以及与孕震力学过程有关的信息为响应参量，在不同的加、卸载方式下对各种响应比的震兆变化及特征进行研究，研究结果表明，加卸载响应比只在非线性系统的输入与系统的失稳密切相关时，才显示出失稳的前兆特征，且主要表现为短临前兆。     

数字滤波方法在月尺度数值预报中的应用：II.保留不同低频过程的效果比较

用数字滤波方法对观测资料序列进行处理，得到初始场用于Ｔ４２Ｌ９全球谱模式的月预报，以去除误差增长较快的高频扰动对低频过程的影响，并且利用多时刻的观测资料提取低频过程的信息。对冬季和夏季两个不同个例进行了实例，并比较了取不同长度的观测序列，截取不同周期的过程作为初值对预报效果的影响。结果说明，经过滤波后对低频分量和平均场的预报都有显著的改进。而且对于较长时效的预报，应保留更低频的过程（比如１０ｄ以上     

First-Order Chemistry in the Surface-Flux Layer

We have discussed the behavior of a non-conserved scalar in the stationary, horizontally homogeneous, neutral surface-flux layer and, on the basis of conventional second-order closure, derived analytic expressions for flux and for mean concentration of a gas, subjected to a first-order removal process. The analytic flux solution showed a clear deviation from the constant flux, characterizing a conserved scalar in the surface-flux layer. It decreases with height and is reduced by an order of magnitude of the surface flux at a height equal to about the typical mean distance a molecule can travel before destruction. The predicted mean concentration profile, however, shows only a small deviation from the logarithmic behavior of a conserved scalar. The solution is consistent with assuming a flux-gradient relationship with a turbulent diffusivity corrected by the Damköhler ratio, the ratio of a characteristic turbulent time scale and the scalar mean lifetime. We show that if we use only first-order closure and neglect the effect of the Damköhler ratio on the turbulent diffusivity we obtain another analytic solution for the profiles of the flux and the mean concentration which, from an experimental point of view, is indistinguishable from the first analytic solution. We have discussed two cases where the model should apply, namely NO which, by night, is irreversibly destroyed by interaction with mainly O₃ and the radioactive ²²⁰Rn. Only in the last case was it possible to find data to shed light on the validity of our predictions. The agreement seemed such that a falsification of our model was impossible. It is shown how the model can be used to predict the surface flux of ²²⁰Rn from measured concentration profiles.     

IAEA-S-1 参考物质及V-CDTS 同位素标准的32S/34S绝对比值

采用高纯S同位素物质和SF6的分析方法对IAEA-S-1参考物质及V-CDT S同位素标准的32S/34S绝对比值进行了实验标定，V-CDT的32S/34S比值为22.6496±0.060，IAEA-S-1的32S/34S比值为22.6564±0.0060.     

A mixed finite element method for Hele-Shaw cell equations

A new numerical method to solve the system of equations describing two phase flow in a Hele-Shaw cell is presented. It combines a mixed finite element method, the method of subtraction of the singularity and a front tracking grid in a single computational strategy. This choice of discretization techniques is well motivated by the difficulties present in the system of equations and the physics of the problem. The new method was tested against analytical solutions and also by solving the Saffman–Taylor viscous fingering problem for finite and infinite mobility ratios. In both cases convergence under mesh refinement is achieved for the fingers developed from an initial sinusoidal interface. Finger splitting is observed for low values of the surface tension and high mobility ratio. Different explanations, based in our results, are provided for this phenomenon. This revised version was published online in July 2006 with corrections to the Cover Date.     

电镀PDC石油全面钻头及其在油气田中的应用

采用低温电镀工艺生产ＰＤＣ石油全面钻头对金刚石无任何热损伤，对喷咀进行组合设计，在两口井中进行试验，取得了很好的经济效益和社会效益，并分析了钻头的特点及存在的问题。