Simulation experiment on hydrocarbon generating potential of various source rocks on the northern margin of the Qaidam Basin,Qinghai, China

The northern margin of the Qaidam Basin is one of the main oil-gas exploration areas in western China, where source rocks are composed mostly of Middle and Lower Jurassic dark mud shale, carbargillite and coal. A large number of subsurface and outcrop samples differing in lithology with different types of organic matter were selected for resource evaluation, research and calculation. And among them, 13 samples were used for simulation experiment on hydrocarbon generating potential of various source rocks. At first, two kinds of heating modes were compared through simulation experiment, including single temperature-step heating and continual heating. Perhaps, the process of hydrocarbon generation and expulsion occurred naturally between a close system and an open system. In addition, the first heating mode was convenient, and all its reaction products were involved in the whole thermal evolution, and the final simulation experimental results were basically in consistency with the natural evolution trend Therefore, the first heating mode was adopted and the hydrocarbon yield of every sample was worked out. According to the type and lithology of organic matter and the hydrocarbon yield of samples for simulation experiment, hydrocarbon generation and expulsion mode with three kinds of lithology and five types of source rock has been established to provide the basis for hydrocarbon generation evaluation, research and resource calculation.     

Late Cenozoic Stratigraphy and Paleomagnetic Chronology of the Zanda Basin, Tibet, and Records of the Uplift of the Qinghai-Tibet Plateau

The characteristics of Late Cenozoic tectonic uplift of the southern margin of the Qinghai- Tibet Plateau may be inferred from fluvio-lacustrine strata in the Zanda basin, Ngari, Tibet. Magnetostratigraphic study shows that the very thick fluvio-lacustrine strata in the basin are 5.89- 0.78 Ma old and that their deposition persisted for 5.11 Ma, i.e. starting at the end of the Miocene and ending at the end of the early Pleistocene, with the Quaternary glacial stage starting in the area no later than 1.58 Ma. Analysis of the sedimentary environment indicates that the Zanda basin on the southern Qinghai-Tibet Plateau began uplift at -5.89 Ma, later than the northern Qinghai-Tibet Plateau. Presence of gravel beds in the Guge and Qangze Formations reflects that strong uplift took place at -5.15 and -2.71 Ma, with the uplift peaking at -2.71 Ma.     

下庄矿田湖子地区铀矿找矿方向探讨

湖子地区位于NNE向诸广-新兴铀成矿带与近EW向大东山-漳州大断裂复合部位,是华南早、晚两期铀成矿热液活动叠加区、放射性高场区,既有"硅化带大脉"型铀矿产出,又有"交点"型铀矿存在,找矿前景良好.文章在论述下庄矿田铀成矿地质环境、铀成矿特征及铀矿定位条件基础上,分析了湖子地区铀成矿条件与找矿前景,指出该区今后铀矿找矿方向是:① 6009号硅化断裂带,在其北段找硅化带大脉型铀矿,在其南段找"交点"型铀矿;②新桥-下庄硅化断裂带和6009号带之间成矿部位,寻找硅化带型和"交点"型铀矿;③NW向、近EW向辉绿岩脉与NNE向、NE向构造交汇部位(交点),寻找"交点"型铀矿.     

祁阳山字型构造质疑

结合区域构造演化背景及构造变形特征,对祁阳弧形构造的形成机制进行研究。分析表明,传统山字型构造机制难以解释祁阳弧形构造的诸多特征,且前人认为变形动力来源于东西向挤压应力场,也与印支期区域构造应力场实为NWW向的构造背景不符,因此祁阳弧形构造并不属典型山字型构造。基于研究区构造活动的客观实际,提出祁阳弧形构造的可能形成机制:NW向基底隐伏断裂和NNE-NE向主干断裂分别于印支期和燕山期产生强烈左旋走滑活动,从而使区域NNE向构造线在中段产生左旋偏转成为NNW向,从而形成S形的祁阳弧形构造。这一机制可较好解释祁阳弧形构造的若干特征,如关帝庙穹窿呈NWW走向、北反射弧构造形迹不显著、北弧弧顶脱位及内弧曲率大于外弧、南弧弧顶脱位、紫云-中田-高峰串珠状穹窿的形成等。上述认识对华南地区弧形构造研究具有一定启示意义:除山字型构造作用和砥柱作用外,还应注意断裂走滑等其他构造活动对弧形构造的制约,以及多次构造活动叠加对构造形迹可能造成的影响。     

神木北部矿区5-2煤层厚度及其底板高程趋势分析

为了查清神木北部矿区5-2煤层赋存特征及成因,选取了该矿区172个典型钻孔数据,用趋势分析法研究了5-2煤层的厚度及其底板高程度变化特征。结果显示:该区煤层厚度总体为南北厚中部薄,东厚西薄;底板高程为南北高中部低,东高西低;煤层厚度和其底板高程间普遍存在正相关关系。在该区构造稳定的背景下,后期改造对煤层厚度及其底板的影响很小,煤层赋存特征主要受沉积与剥蚀的控制。     

Prediction of UT1–UTC,LOD and AAM χ<Subscript>3</Subscript> by combination of least-squares and multivariate stochastic methods

This article presents the application of a multivariate prediction technique for predicting universal time (UT1–UTC), length of day (LOD) and the axial component of atmospheric angular momentum (AAM χ ₃). The multivariate predictions of LOD and UT1–UTC are generated by means of the combination of (1) least-squares (LS) extrapolation of models for annual, semiannual, 18.6-year, 9.3-year oscillations and for the linear trend, and (2) multivariate autoregressive (MAR) stochastic prediction of LS residuals (LS + MAR). The MAR technique enables the use of the AAM χ ₃ time-series as the explanatory variable for the computation of LOD or UT1–UTC predictions. In order to evaluate the performance of this approach, two other prediction schemes are also applied: (1) LS extrapolation, (2) combination of LS extrapolation and univariate autoregressive (AR) prediction of LS residuals (LS + AR). The multivariate predictions of AAM χ ₃ data, however, are computed as a combination of the extrapolation of the LS model for annual and semiannual oscillations and the LS + MAR. The AAM χ ₃ predictions are also compared with LS extrapolation and LS + AR prediction. It is shown that the predictions of LOD and UT1–UTC based on LS + MAR taking into account the axial component of AAM are more accurate than the predictions of LOD and UT1–UTC based on LS extrapolation or on LS + AR. In particular, the UT1–UTC predictions based on LS + MAR during El Niño/La Niña events exhibit considerably smaller prediction errors than those calculated by means of LS or LS + AR. The AAM χ ₃ time-series is predicted using LS + MAR with higher accuracy than applying LS extrapolation itself in the case of medium-term predictions (up to 100 days in the future). However, the predictions of AAM χ ₃ reveal the best accuracy for LS + AR.     

沿空掘巷合理煤柱宽度综合分析与确定

在总结分析经验法、理论计算法、数值模拟法、现场实测等确定煤柱宽度方法优缺点的基础上,提出了采用现场实测和数值模拟相结合的方法来确定保留煤柱宽度。根据石炭井二矿生产实际,分别对巷道开挖前后,不同煤柱宽度下围岩应力、变形进行了模拟,同时利用21053工作面异型煤柱的有利条件,对不同煤柱宽度下巷道围岩变形、支护结构受力等进行了实测。经过对监测数据的分析,得出了巷道围岩变形、支护结构受力与煤柱宽度之间的关系,结合数值模拟结果,确定了石炭井二矿煤柱宽度。     

基于小波变换的全色和多光谱遥感图像融合

基于多分辨率小波变换,针对高分辨率全色图像和多光谱图像的融合,提出了一种基于方向可调滤波器的区域能量测量的小波变换融合算法.将此方法与HIS和传统小波的融合方法比较,结果表明,该方法在保留多光谱图像光谱信息的同时,能够更好地保留高分辨率图像的空间信息,融合效果有较大改善.     

福鼎山后尖玄武岩筒地质特征及其形成机制探讨

福鼎山后尖玄武岩位于福鼎一福清北东向断裂带北东段,呈岩筒状产于石帽山群下组下段火山沉积岩中,属钠质碱性玄武岩系列,由玄武质火山角砾岩、碧玄岩、橄榄辉长一玄武岩组合,经历火山爆发、喷溢、次火山侵入3个阶段而形成。     

河南镇平秋树湾矿区铜、钼矿床地质特征及深部找矿潜力分析

秋树湾矿区是一座中型规模的铜、钼矿床。在水平方向上矿区具北铜南钼的分布特征,即北山铜矿床和南山钼矿床;从垂向上看,北山铜矿床深部赋存有规模较大的钼矿体,并具垂直分带现象,即上铜下钼。这主要是矿区成矿后,构造活动使南山赋矿区向上逆冲,使其上部的铜矿体被剥蚀,而北山赋矿区上部的矿体则保存了下来。因此,研究认为,在北山铜矿区的下部及南山钼矿区中深部寻找隐伏钼矿床具有较大潜力。