Influence of matric suction on shear strength behavior of a residual clayey soil

In this paper, the shear strength with respect to the matric suction of unsaturated soils was studied. For this purpose, unsaturated triaxial testing procedures were applied to the undisturbed residual soil specimens. An apparatus for performing triaxial tests was designed and constructed. In the tests, matric suction was controlled by using the axis translation technique, and pore water volume changes were measured by means of a volume change transducer with 10⁻⁸ m³ sensitivity. The test results indicated that the matric suction contributes to the shear strength of unsaturated soil specimens, and this contribution called suction strength varies non-linearly with respect to the matric suction. The logarithmic model needing to know the air-entry value and the internal friction angle of a soil specimen for prediction of the suction strength were presented and compared with the test results. It was found that suction strength values predicted from the proposed model were in satisfactory agreement with the experimental results.     

利用井径资料预测鱼卡煤田东部勘探区七煤顶板的稳定性

在煤田测井中，井径的变化对其它测井参数是一种干扰，但利用井径的相对变化值（井径扩大系数），可有效地评估岩石的强度等级和可采煤层顶底板的稳定性。统计鱼卡煤田东部勘探区29个钻孔孔径的变化值，按岩石抗压强度划分原则，将其七煤顶板稳定性划分为5个等级，据此固定了该煤田七煤顶板稳定性分布图。     

Convergence-control approach for rock tunnels reinforced by grouted bolts,using the homogenization concept

The scope of this paper is to introduce a method for the analysis of rock tunnels reinforced by grouted bolts, based on the convergence-control approach. The analytical formulations presented in this paper refers to an elasto-plastic behavior of the rock mass and the latest Hoek and Brown yield criterion (Version 2002). In order to model the reinforced plastic zone, the equivalent material approach was taken into account such that the apparent strength of the rock mass is improved as a consequence of the bolting effect. The general design guides and examples presented are intended to facilitate the comprehension and application of the proposed analytical solution in practice.     

Effect of brittle fracture on the rheological structure of the lithosphere and its application in the Ordos

An empirical formula for the fracture strength of the principal rock type in the lithosphere is obtained based on the experimental data from previous studies, in which the effects of the confining pressure, size of the rock sample, temperature, strain rate and the pore pressure are taken into account, the empirical formulae for the effects of them are also presented. By comparing the frictional strength to the fracture strength calculated using the new empirical formula, it is shown that frictional sliding is dominant in the upper crust but brittle fracture is dominant in the lower part of the crust and the lithosphere beneath the crust. Therefore the fracture mechanism must be taken into account in the study of the rheological structure of the lithosphere. The empirical formula for the fracture strength is applied to study the rheological structure of the lithosphere in the Ordos block. Brittle regime in the rheological structure can be divided into two sub-regions, in one of which brittle fracture and in the other frictional sliding are dominant, respectively, unlike previous conventional studies in which frictional sliding is assumed to be the only factor; the magnitude of the rheological strength of the lithosphere calculated by the empirical formula is also lower than that obtained in previous conventional studies.     

Landslide susceptibility mapping using GIS and digital photogrammetric techniques: a case study from Ardesen (NE-Turkey)

Ardesen is a settlement area which has been significantly damaged by frequent landslides which are caused by severe rainfalls and result in many casualties. In this study a landslide susceptibility map of Ardesen was prepared using the Analytical Hierarchy Process (AHP) with the help of Geographical Information Systems (GIS) and Digital Photogrametry Techniques (DPT). A landslide inventory, lithology–weathering, slope, aspect, land cover, shear strength, distance to the river, stream density and distance to the road thematics data layers were used to create the map. These layer maps are produced using field, laboratory and office studies, and by the use of GIS and DPT. The landslide inventory map is also required to determine the relationship between these maps and landslides using DPT. In the study field in the Hemsindere Formation there are units that have different weathering classes, and this significantly affects the shear strength of the soil. In this study, shear strength values are calculated in great detail with field and laboratory studies and an additional layer is evaluated with the help of the stability studies used to produce the landslide susceptibility map. Finally, an overlay analysis is carried out by evaluating the layers obtained according to their weight, and the landslide susceptibility map is produced. The study area was classified into five classes of relative landslide susceptibility, namely, very low, low, moderate, high, and very high. Based on this analysis, the area and percentage distribution of landslide susceptibility degrees were calculated and it was found that 28% of the region is under the threat of landslides. Furthermore, the landslide susceptibility map and the landslide inventory map were compared to determine whether the models produced are compatible with the real situation resulting in compatibility rate of 84%. The total numbers of dwellings in the study area were determined one by one using aerial photos and it was found that 30% of the houses, with a total occupancy of approximately 2,300 people, have a high or very high risk of being affected by landslides.     

Dissolved inorganic nutrients and organic substrates in the River Warnow (North-Eastern Germany) – Utilisation by bacterioplankton

After 1990, external loads of Central European rivers with inorganic nutrients (nitrogen and phosphorus) and organic material were reduced because of changed environmental laws. However, in the eutrophic lowland River Warnow, North-Eastern Germany, nitrate concentrations remained high with 35–185 μmol l⁻¹ without a significant decrease since 1992. In contrast, phosphate concentrations, varying between 0.3 and 5.2 μmol l⁻¹ during the growth season 2002, decreased significantly over the years. However, its concentrations still exceeded 1 μmol l⁻¹ regularly in the growth seasons. This load led to a substantial accumulation of organic matter additional to high terrestrial inputs. Despite the high organic load, the remineralising bacteria were mainly inactive in River Warnow. Therefore, the composition of the dissolved organic material, especially its bioavailability, were investigated during the growth season 2002 and discussed with other potential controlling factors. River Warnow carried a high load of dissolved organic carbon (14 mg l⁻¹), especially of humic substances (5.5 mg C l⁻¹). Bacterial abundance (12×10⁶ ml⁻¹) as well as production (1.7 μg C l⁻¹ h⁻¹) depended on temperature. During late spring and summer at constantly higher temperatures, bacterial production correlated positively to readily utilisable substrates and to humic compounds. Thus, the bacterial community in River Warnow may be well adapted or contain enough species using the available amino acids and carbohydrates as well as humic matter compounds. However, calculated from protozoan biomass, grazing may control bacterial biomass and perhaps community composition profoundly, what lead to the low percentages of active bacteria.     

Intergrain contact density indices for granular mixes I： Framework

Mechanical behavior such as stress-strain response, shear strength, resistance to liquefaction, modulus, and shear wave velocity of granular mixes containing coarse and fine grains is dependent on intergrain contact density of the soil. The global void ratio e is a poor index of contact density for such soils. The contact density depends on void ratio, fine grain content （Cv）, size disparity between particles, and gradation among other factors. A simple analysis of a two-sized particle system with large size disparity is used to develop an understanding of the effects of Cv, e, and gradation of coarse and fine grained soils in the soil mix on intergrain contact density. An equivalent intergranular void ratio （ec）oq is introduced as a useful intergrain contact density for soils at fines content of less than a threshold value Crth. Beyond this value, an equivalent interfine void ratio （ef）eq is introduced as a primary intergrain contact density index. At higher values of Cv beyond a limiting value of fine grains content CVL, an interfine void ratio ef is introduced as the primary contact density index. Relevant equivalent relative density indices （Drc）eq and （Drf）eq are also presented. Experimental data show that these new indices correlate well with steady state strength, liquefaction resistance, and shear wave velocities of sands, silty sands, sandy silts, and gravelly sand mixes.     

Limit state model for R.C. bridge joints under seismic loading

Most of the available models of monolithic reinforced concrete joints under seismic action focus on estimation of cracking and ultimate shear strengths. Very few studies have been directed towards developing expressions for the associated joint deformations at the milestone response points so as to compose a limit-state model for joints that would be compatible with the emerging framework of deformation based seismic assessment and design methods. This objective is pursued in the present paper with particular emphasis on monolithic bridge joints. Deformation capacity at yielding and failure of joints is derived by establishing equilibrium and geometric compatibility of smeared stresses and strains, and satisfying material constitutive relationships. Expressions and model parameters are calibrated with the database of published bridge joint tests assembled from International literature, using statistical evaluation. From the mean values of the design parameters simplified equations for shear strength and ultimate shear strain of bridge joints are proposed.     

The Relationships between Effective Porosity,Uniaxial Compressive Strength and Sonic Velocity of Intact Borrowdale Volcanic Group Core Samples from Sellafield

The effective porosity, saturated sonic velocity and saturated uniaxial compressive strength were determined on a large number of Borrowdale Volcanic Group volcaniclastic core samples from three boreholes at Sellafield, Cumbria. The work formed part of the UK Nirex Limited site investigation into whether the Sellafield area could be suitable as a repository for intermediate and low level radioactive waste. Most of the intact samples were of low to very low effective porosity, had a high sonic velocity and were very strong to extremely strong. However, a proportion of values deviated significantly from this. Bivariate analysis showed a negative relationship exists between sonic velocity and effective porosity. The cross plots of these two parameters with uniaxial compressive strength showed a wide range of strength values for samples of low effective porosity and high sonic velocity. Six failure types were identified during the uniaxial compressive strength tests. The strongest samples tended to fail through the matrix and the weakest rock samples tended to fail through haematized material or along haematized veins. Effective porosity and sonic velocity measurements could not distinguish between those samples that failed through the matrix and those that failed along discrete narrow veins. The presence of narrow haematized veins has a major effect on the intact rock strength.