Geometry and accuracy of reflecting points in bistatic satellite altimetry

The analysis of the time and space distribution of specular (reflecting) points in bistatic altimetry between GPS and CHAMP satellites or SAC-C (taken as examples) is extended from Wagner and Klokočník (2003 J. Geod 77: 128–138). We demonstrate a significantly higher number and density of reflecting points in bistatic altimetry in comparison with traditional monostatic altimetry. After an outline of our older accuracy assessment for the vertical position of the reflecting point, we add a new independent derivation and compare both approaches. We account for orbit errors of both the transmitters (GPS) and receiver (CHAMP) satellites, and the measurement (delay) error. We found that the accuracy of the vertical position of the reflecting point decreases only slowly with increasing off-nadir angle and that the orbit errors must be accounted for if decimeter and better accuracy is required. In this paper, we do not study errors such as state of the ocean, technical parameters of the receiving system, and atmospheric corrections.     

Quality Assessment Of Digital Surface Models Generated From IKONOS Imagery

The growing applications of digital surface models (DSMs) for object detection, segmentation and representation of terrestrial landscapes have provided impetus for further automation of 3D spatial information extraction processes. While new technologies such as lidar are available for almost instant DSM generation, the use of stereoscopic high-resolution satellite imagery (HRSI), coupled with image matching, affords cost-effective measurement of surface topography over large coverage areas. This investigation explores the potential of IKONOS Geo stereo imagery for producing DSMs using an alternative sensor orientation model, namely bias-corrected rational polynomial coefficients (RPCs), and a hybrid image-matching algorithm. To serve both as a reference surface and a basis for comparison, a lidar DSM was employed in the Hobart testfield, a region of differing terrain types and slope. In order to take topographic variation within the modelled surface into account, the lidar strip was divided into separate sub-areas representing differing land cover types. It is shown that over topographically diverse areas, heighting accuracy to better than 3 pixels can be readily achieved. Results improve markedly in feature-rich open and relatively flat terrain, with sub-pixel accuracy being achieved at check points surveyed using the global positioning system (GPS). This assessment demonstrates that the outlook for DSM generation from HRSI is very promising.     

Hyper Redundancy for Accuracy Enhancement in Automated Close Range Photogrammetry

A generic network design in close range photogrammetry is one where optimal multi-ray intersection geometry is obtained with as few camera stations as practicable. Hyper redundancy is a concept whereby, once the generic network is in place, many additional images are recorded, with the beneficial impact upon object point precision being equivalent to the presence of multiple exposures at each camera position within the generic network. The effective number of images per station within a hyper redundant network might well be in the range of 10 to 20 or more. As is apparent when it is considered that a hyper redundant network may comprise hundreds of images, the concept is only applicable in practice to fully automatic vision metrology systems, where it proves to be a very effective means of enhancing measurement accuracy at the cost of minimal additional work in the image recording phase. This paper briefly reviews the network design and accuracy aspects of hyper redundancy and illustrates the technique by way of the photogrammetric measurement of surface deformation of a radio telescope of 26 m diameter. This project required an object point measurement accuracy of σ  = 0·065 mm, or 1/400 000 of the diameter of the reflector.     

Ground truth seismic events and location capability at Degelen mountain, Kazakhstan

We utilized nuclear explosions from the Degelen Mountain sub-region of the Semipalatinsk Test Site (STS), Kazakhstan, to assess seismic location capability directly. Excellent ground truth information for these events was either known or was estimated from maps of the Degelen Mountain adit complex. Origin times were refined for events for which absolute origin time information was unknown using catalog arrival times, our ground truth location estimates, and a time baseline provided by fixing known origin times during a joint hypocenter determination (JHD). Precise arrival time picks were determined using a waveform cross-correlation process applied to the available digital data. These data were used in a JHD analysis. We found that very accurate locations were possible when high precision, waveform cross-correlation arrival times were combined with JHD. Relocation with our full digital data set resulted in a mean mislocation of 2 km and a mean 95% confidence ellipse (CE) area of 6.6 km² (90% CE: 5.1 km²), however, only 5 of the 18 computed error ellipses actually covered the associated ground truth location estimate. To test a more realistic nuclear test monitoring scenario, we applied our JHD analysis to a set of seven events (one fixed) using data only from seismic stations within 40° epicentral distance. Relocation with these data resulted in a mean mislocation of 7.4 km, with four of the 95% error ellipses covering less than 570 km² (90% CE: 438 km²), and the other two covering 1730 and 8869 km² (90% CE: 1331 and 6822 km²). Location uncertainties calculated using JHD often underestimated the true error, but a circular region with a radius equal to the mislocation covered less than 1000 km² for all events having more than three observations.     

应用VB+MapInfo开发的地震定位程序

利用OLE自动化方法，将MapInfo集成在VB中，在手工地震交切定位的基础上，开发了计算机定位程序，该程序与传统的定位方法相比，精度和效率都有较大幅度的提高。并在地震应急中发挥了作用。     

Earthquake—generating Structure Revealed by 1999 Sichuan mianzhu Earthquake Sequence with Ms=5.0

Through the accurate determination of hypocenter location,the measurement of the main focal mechanism solutions and the analyses of time dependent processes for Sichuan Mianzhu earthquake sequence with Ms=5.0 occurred along the middle segment of Longmenshan fault zone on November 30,1999,the distribution of focal depth section,the stress relase and seismicity features are given to reveal the earthquake-geneating structure of the earthquake sequence.The obtained results show the activity features for this sequence as follows:(1) There is no obvious foreshock,the accumulated strain energy releases in nearly pulse way,fluctuation of the seismic activity level is not quite evident during the duration of the sequence,and the statistical relation between the large events and the small events is less compatible with the traditional G-R estimation;(2) The epicenters of the earthquake sequence are not distributed on the main Longmenshan piedmont faults emerging out ground,but near the hidden Longmenshan piedmont faults.The direction of epicenter distribution is not very coincident with the fault strikes.The microscopic epicenters are relatively far from the macroscopic epicenters,The focal depths range from 5km to 16km;(3) The fractures of focal fault plane with the NE strike appear out the strike-slip displacement with a few overthrust components under the major principal compressive stress of NNE direction.From these,we consider it should be paid more attentions to the underground hidden faults near the ground fault zone on a large scale for their generating earthquake risk.     

河南豫北地震台网地区波速的探讨

为了解决河南豫北地区地震的定位问题 ,对豫北台网内的 10个典型地震 ,使用了 7个地震台站的资料 ,用波速比求出横波速度 ;用和达定位法 (有的同时使用高桥法 )进行了精确定位 ,求出震源深度 ;测量了震中至各台的震中距 ,以此反算出了纵波速度。通过计算 ,确定出了较为适合河南豫北地震台网地区的波速。     

The Mobile Street Food Service Practice in the Urban Economy of Kumba, Cameroon

The mobile food service practice is one of multiple survival strategies adopted by poor urban households in Cameroon to maintain and expand the base of subsistence incomes, especially in the current surge of economic crisis. Though a fast-growing informal sector enterprise, it is still at an artisanal stage in urban Cameroon, creating an urgent need for a supportive policy environment that could have measurable positive impacts on improving the productivity, welfare and income levels of the micro-entrepreneurs. This study looks at the mobile food service practice in Kumba, Cameroon, in terms of its basic characteristics, the locational factors influencing its socio-spatial distribution, the critical success factors (CSFs) determining customer choices, and its impacts on the local environmental resources and quality of urban life. The mobile food service practice creates employment, generates income, and acts as a food energy-support instrument to the urban poor and local economic activities operating in Kumba. The vendors, who are mostly women, can make incomes that are 405 per cent of the national minimum wage and, thus, contribute financially towards the education, health and survival of their families. The paper provides some recommendations on ways to improve the efficiency of this sector so as to achieve sustainable economic and social development and to enhance empowerment thereof.     

高精度推求正高的两种方法

论述了高精度推求正高的两种方法 ,并对正高精度的推估及其在模型上的试算也作了讨论 ,对于海拔为 5 0 0 0m的高山 ,正高的误差一般不超过± 1 0cm ,这与距青岛水准原点达数千公里的西部高山 (原 )处正常高的精度也比较接近     

缺少控制点的卫星遥感对地目标定位

从单线阵推扫式传感器的成像机理出发，利用6个卫星轨道开普勒参数和3个传感器姿态角建立了推扫式卫星遥感影像坐标与其地面点在地心坐标系下的坐标关系式，即构像方程。按照所建立的构像方程，对某地区一景SPOT-5影像进行对地目标定位，获得了实地上83．392m的平面精度；利用单个地面控制点对卫星轨道开普勒参数和传感器姿态实施调整后，目标定位精度提高到14．217m。试验证实，所建立的构像方程是正确的,在卫星遥感对地目标定位中有较好的应用前景。