长春地区白垩系地层地铁勘察参数的确定

白垩系砾岩及泥岩地层在长春地区普遍存在,但由于砾岩地层现场钻探难以取样进行室内土工试验,泥岩地层由于存在水稳性、膨胀性、崩解性等因素影响,砾岩和泥岩的承载力值、抗剪强度参数指标、渗透系数以及基床系数等参数多以经验数据评估方法为主,在合理准确确定相关参数的问题上存在较大分歧。通过对长春地区白垩系砾岩及泥岩进行原位平板载荷试验、浸水载荷试验以及现场原位剪切试验,获取砾岩、泥岩的承载力值、抗剪强度指标、渗透系数以及现场基床系数值等,为地铁建设工程地质问题分析及设计提供充足的地质依据。     

水平-摇摆耦合振动波阻板主动隔振三维分析

为研究三维地基中波阻板（简称WIB）的隔振效果,建立了以薄层法基本解答作为格林函数的半解析边界单元法。对水平-摇摆耦合激振作用下WIB隔振系统的主动隔振进行了计算,详细分析了WIB参数对隔振效果的影响。研究表明,WIB可以有效地隔振;增加WIB的厚度、提高WIB的弹性模量、减小WIB 的埋深可以有效提高隔振效果,而增加WIB的直径可以显著降低WIB范围内地表位移振幅,但对WIB范围外的地表位移影响较为复杂。     

粉喷桩加固软基的试验研究

根据粉喷桩复合地基的静载荷试验资料 ,对四种不同类型的地基进行了地基承载力、孔隙水压力、粉喷桩桩身轴力、桩土应力比、变形模量等的分析和研究 ,全面系统地阐述了粉喷桩加固软基的特性 ,为粉喷桩的工程应用提供有益的理论依据和参考。     

A Study of Seismicity and Earthquake Hazard at the Proposed Kalabsha Dam Site,Aswan, Egypt

High and Aswan Dams Authority (HADA) proposed a plan aiming at constructing a rockfill dam in the Kalabsha area, about 60 km south of Aswan High Dam. The aim of this dam is to restrain the overflow of water to the Kalabsha Valley for keeping one billion cubic meters from being lost due to seepage and evaporation. The safety of dams during earthquakes is extremely important because failure of such a structure may have disastrous consequences on life and property. Therefore, different factors were considered as part of a site assessment. Five seismic source zones, close enough to the site to give rise to potentially damaging earthquake ground motions, were identified. Seven active faults that have the potential for producing significant earthquakes and that pass through or near the dam site were also identified. The earthquake loading represented by ground motions at the site was evaluated. Probabilistic seismic hazard procedures were used for assessing the earthquake loading at six individual sites using Area-and Line-Source Models (ASM & LSM). The ASM is based on current observed seismicity, whereas the LSM is based on geological slip rates. The output represents the expected acceleration amplitude with 90 percent probability of not being exceeded in exposure times of 20, 50, and 100 years. The results from the two models appear to be different, the expected ground motions from ASM were twice as high as expected from LSM. This difference is due to the load of the Aswan reservoir (Nasser Lake) triggering earthquakes on those parts of the faults that lie under the lake at Kalabsha area. The hazard at the selected sites is given by the hazard curve that is represented by the relationship between the peak ground acceleration and its annual exceedance probability. By comparing the curves for the six individual sites for the same source model, it can be concluded that the potential ground acceleration level for all the sites is almost the same. Considering the mean results from the two models, the annual exceedance probability of the expected ground acceleration from ASM is approximately ten times higher than the annual exceedance probability from LSM.Since ASM is based on current seismicity, it is more appropriate forrepresenting the actual hazard for the dam site.     

碎石土地基湿陷性研究

主要以甘南330 kV变电所碎石土地基的现场浸水载荷试验和室内实验为基础,根据湿陷变形的特征,分析了影响碎石土地基湿陷变形的主要影响因素,探讨了碎石土地基的湿陷机理。认为碎石等大骨架颗粒与细粒胶结物相填充的特殊结构是碎石土地基湿陷最主要的原因。碎石土由于浸水骨架颗粒之间抗剪、抗压强度降低而导致碎石土结构破坏,随之填充在骨架颗粒之间的细颗粒产生二次湿陷,两者引起土体体积减小所导致。     

沂源县田庄水库农业面源氮素淋滤行为研究

受农业面源影响,典型山区水库-田庄水库氮素超标,通过模拟土壤在不同降雨强度与不同降雨类型下的淋滤行为,探讨氮素淋溶释放规律,并对田庄水库农业面源氮素入库量进行了计算。结果表明,降雨类型和降雨强度只影响土壤中氨氮峰值浓度出现的时间,对其数值影响不大,由于土壤中硝氮含量较高,使降雨强度和类型对其淋出液中的硝氮峰值浓度产生的时间和数值都有所影响;农业面源氮污染通过田庄水库四条入库河流年均排入水库中的硝氮总量高达604．49t,氨氮为23．85t。     

任意荷载下欠固结地基的非线性一维固结

根据Gibson得到的固相坐标z下的非线性固结控制方程,运用Laplace变换求解了在任意荷载作用下的单层饱水欠固结地基一维非线性变形问题;通过Laplace逆变换,求得单层饱水欠固结地基在任意荷载作用下的一维非线性固结解。结合单层地基在几种常见荷载作用下固结变形的算例,对解进行了探讨,揭示了任意变荷载作用下单层饱和软粘土欠固结地基一维非线性固结的特性,得到了一些可用于指导工程实践的有益结论。     

基于Mohr-Coulomb准则的喷粉桩静载实验与三维数值模拟

在土建、交通、水利等工程建设中利用喷粉桩来处理软弱地基,被称为是经济、快速、有效实用的方法。结合南京四桥桩基施工工程,对工程中所用到的喷粉桩进行静荷载试验,并采用三维有限元数值模拟的方法对单桩复合地基进行数值计算,所得计算结果与实验数据基本吻合。     

Researches on Cartographic Database-Based Interactive Three-Dimensional Topographic Map

With the development of computer graphics, the three-dimensional (3D) visualization brings new technological revolution to the traditional cartography. Therefore, the topographic 3D-map emerges to adapt to this technological revolution, and the applications of topographic 3D-map are spread rapidly to other relevant fields due to its incomparable advantage. The researches on digital map and the construction of map database offer strong technical support and abundant data source for this new technology, so the research and development of topographic 3D-map will receive greater concern. The basic data of the topographic 3D-map are rooted mainly in digital map and its basic model is derived from digital elevation model (DEM) and 3D-models of other DEM-based geographic features. In view of the potential enormous data and the complexity of geographic features, the dynamic representation of geographic information becomes the focus of the research of topographic 3D-map and also the prerequisite condition of 3D query and analysis. In addition to the equipment of hardware that are restraining, to a certain extent, the 3D representation, the data organization structure of geographic information will be the core problem of research on 3D-map. Level of detail (LOD). space partitioning, dynamic object loading (DOL) and object culling are core technologies of the dynamic 3D representation. The objectselection, attribute-query and model-editing are important functions and interaction tools for users with 3D-maps provided by topographic 3D-map system, all of which are based on the data structure of the 3D-model. This paper discusses the basic theories, concepts and cardinal principles of topographic 3I)-map,expounds the basic way to organize the scene hierarchy of topographic 3D-map based on the node mechanism and studies the dynamic representation technologies of topographic 3D-map based on LOD, space partitioning, DOL and object culling. Moreover. such interactive operation functions are explored, in this paper, as spatial query, scene editing and management of topographic 3D-map. Finally, this paper describes briefly the applications of topographic 3D-map in its related fields.     

河流水质预测中的模型选择和源强估算

论述了在水质规划和预测中水质模型的选择原则及不同模型的功能,指出COD一级降解模型在理论上的明显缺陷。同时探讨了由COD_Cr和COD_Mn法两种测定方法所引起的在源强计算中存在的问题,提出了较为合理和实用的BOD₅的源强估算方法。