Trace metals in suspended particulate matter and in sediment trap material from a permanently anoxic fjord — Framvaren, South Norway

Geochemical studies of the trace metal concentrations in suspended particulate matter (SPM) and sediment trap material from a permanently anoxic fjord, Framvaren, South Norway in 1989 and 1993 indicate that extremely high concentrations of zinc (max = 183920 mg/kg), copper (max = 4130 mg/kg), lead (max = 2752 mg/kg), and cadmium (max= 8.1 mg/kg) sometimes (1993) occur in the SPM collected in the anoxic water layer. The highest concentrations of Zn occur just below the redoxcline at 22 m water depth (in 1993), and copper, lead and cadmium have maximum concentrations between 30 and 80 m depth, where the amount of total SPM is at a minimum (about 0.3 mg/L). On a mass per volume (g/L) basis, the maximum concentrations of Cd, Cu and Fe occur at the interface (21m) and those of Zn occur just below the redoxcline (22 m depth). The SPM and sediment trap data suggest that the metals are precipitated as sulfide minerals in the anoxic water. The presence of particulate sulfides was confirmed by SEM studies that show the occurrence of discrete metal (Cu, Fe, Pb, and Zn) sulfide particles in size from 10–20 m as well as framboidal pyrites (1–5 m in size). Higher levels of metal sulfides at intermediate depths rather than in the deep water of Framvaren (> 100 m), may be due to input of trace metals by water exchange over the sill in the upper part of the water column. In the deep water, less metal sulfide precipitation takes place due to depletion of trace metals, and the dilution of particulate metal concentrations by organic matter and by the chemogenic formation of calcite.     

SOME NEW UNDERSTANDINGS OF LAND-SURFACE PROCESSES IN ARID AREA FROM THE HEIFE*

The survey for the HEIFE(Atmosphere-Land Surface Processes Experiment at Heihe River Basin,Western China) is given in the paper.The following basic subjects for land-surface processes in arid areas are studied:(1) the general characteristics of the energy budget on ground surface in arid areas;(2) the parameterization of the land surface processes;(3) the interaction between oasis and its desert circumstances,a special phenomenon in arid areas.The analysis shows that the sensible heat flux in the surface energy budget is in the majority,and the latent heat flux may be neglected.The influence of atmospheric stratification stability on the turbulent transfer of energy and substance must be considered in parameterization of land surface processes in arid areas.The "cold island effect" phenomenon in oasis and the "humidity inversion" phenomenon in desert near oasis are the result of the interaction between them.The results would improve the understanding of land surface processes in arid areas.     

Energy balance of simple elastodynamic sources

Complete relations are derived for energy and energy flux of elastic waves generated by an isotropic and double-couple source in a perfectly elastic, homogeneous, isotropic, and unbounded medium. In the energy balance of elastodynamic sources near-field waves play an essential role, transforming static energy into wave energy, andvice versa. For explosive and dislocation sources, the sources surface radiates a positive wave energy that is partially distributed to the medium transforming into static energy. For implosive and antidislocation sources, the source surface generates elastic waves, but it does not necessarily imply that it also radiates a positive wave energy. The energy transported by waves can originate in gradual transformation of the static-to-wave energy during propagation of waves through a stressed medium.On leave from Geophysical Institute, Czech Academy of Sciences, Boní II/1401, 41 31, Praha 4 Czech Republic     

Textural segmentation of digital rock images into bedding units using texture energy and cluster labels

The texture of digital rock images, as recorded, for instance, with borehole imaging devices, is shown to reflect different bedding types. Textural segmentation of borehole images, therefore, subdivides the recorded sequence into bedding units. We show that a textural segmentation algorithm based on the concept of texture energy achieves good results when compared with synthetic as well as real data in which petroleum geologists have performed zonations on cores. Texture energy involves filtering of the original image with a set of texture sensitive masks. The filtering is done as a finite convolution over the size of the masks. On the resulting images the variance is computed over a relatively large sliding window, which, in its practical implementation, covers the full width of the image. The resulting nine one-dimensional curves are then clustered hierarchically into a user-determined number of image texture or lithological bedding classes. Principal component analysis previous to clustering can be used to reduce redundancy in the data. A recurring and relatively ill-defined problem in this field are macro-textures, i.e., the cyclic interbedding of two or more bedding types. We show that sliding Fourier transforms and variable mask scale can successfully address the zonation of macro-textures. In general, the method gives best results with mask sizes equivalent to 2–4 centimeters, reflecting the length scale at which the investigated geological bedding seems to have its highest variation.     

碳中和目标下关键矿产在清洁能源转型中的作用、供需分析及其建议

在"碳中和"目标的驱动下，全球能源系统向清洁化、低碳化甚至无碳化发展已是大势所趋。针对向清洁能源转型的需求，采用了统计对比、分类汇总、综合分析等方法，分析研究了关键矿产在电池、电网、低碳发电和氢能等行业中的作用和需求。结合当前关键矿产产量的地理集中度高、项目开发周期长、资源质量下降等矿产供应和投资计划不能满足清洁能源转型的需求等问题，提出确保关键矿产多样性供应，推动价值链各环节的技术创新，扩大回收利用，增强供应链弹性和市场透明度，将更高的环境、社会和治理标准纳入主流程及加强生产者和消费者之间的国际合作等建议。     

A search for ultra-high energy counterparts to gamma-ray bursts

A small air shower array operating over many years has been used to search for ultra-high energy (UHE) gamma radiation ( 50 TeV) associated with gamma-ray bursts (GRBs) detected by the BATSE instrument on the Compton Gamma-Ray Observatory (CGRO). Upper limits for a one minute interval after each burst are presented for seven GRBs located with zenith angles < 20°. A 4.3 excess over background was observed between 10 and 20 minutes following the onset of a GRB on 11 May 1991. The confidence level that this is due to a real effect and not a background fluctuation is 99.8%. If this effect is real then cosmological models are excluded for this burst because of absorption of UHE gamma rays by the intergalactic radiation fields.     

Some breakage characteristics of ultra-fine wet grinding with a centrifugal mill

A centrifugal mill is a high-power intensity media mill that can be used for ultra-fine grinding, employing centrifugal forces generated by gyration of the axis of the mill tube in a circle. The mill charge motion is quite different depending on the ratio of the gyration diameter to the mill diameter (G / D ratio), varying from a motion similar to that of a conventional tumbling media mill to that of a vibration mill. In this study, a centrifugal mill was constructed with an arrangement where the gyration diameter could be readily adjusted. The batch grinding characteristics of three different minerals (limestone, talc and illite) in water with dispersing agent were investigated at various G / D ratios. It was found that the optimum G / D ratio in terms of the specific energy consumption to give a desired fineness of product was different for the three minerals. This was due to their different reactions to the breakage mechanisms provided by the mill charge motion at varying G / D ratios. The size distributions became progressively narrower at increased grinding times, and particles finer than about 0.1 μm were not detected even for prolonged grinding times. Measurement of specific surface areas indicated that this was not due to an artifact of the size measurements by laser diffractometry. This implies that there is a limitation in which particles finer than 0.1 μm are not produced under the conditions tested in this type of mill, but further investigation is needed for experimental verification of this limit of comminution.     

On the role of heat flow, lithosphere thickness and lithosphere density on gravitational potential stresses

Gravitational potential stresses (GPSt) are known to play a first-order role in the state of stress of the Earth's lithosphere. Previous studies focussed mainly on crust elevation and structure and little attention has been paid to modelling GPSt using realistic lithospheric structures. The aim of the present contribution is to quantify gravitational potential energies and stresses associated with stable lithospheric domains. In order to model realistic lithosphere structures, a wide variety of data are considered: surface heat flow, chemical depletion of mantle lithosphere, crustal thickness and elevation. A numerical method is presented which involves classical steady-state heat equations to derive lithosphere thickness, geotherm and density distribution, but additionally requires the studied lithosphere to be isostatically compensated at its base. The impact of varying surface and crustal heat flow, topography, Moho depth and crust density on the signs and magnitudes of predicted GPSt is systematically explored. In clear contrast with what is assumed in most previous studies, modelling results show that the density structure of the mantle lithosphere has a significant impact on the value of the predicted GPSt, in particular in the case of thick lithospheres. Using independent information from the literature, the method was applied to get insights in the state of stress of continental domains with contrasting tectono-thermal ages. The modelling results suggest that in the absence of tectonic stresses Phanerozoic and Proterozoic lithospheres are spontaneously submitted to compression whereas Archean lithospheres are in a neutral to slightly tensile stress state. These findings are in general in good agreement with global stress measurements and observed geoid undulations.     

Environmental impacts from mining at Taojiang Mn ore deposit, central Hunan, China

The Taojiang Mn ore deposit was exploited in the early 1960s, and waste rocks were developed since then. Because the Mn ores were hosted within the metal-enriched black shales （Peng et al., 2004）, the continuous mining has led to the exposure of an immense quality of black shales, which might cause serious impacts on environments. The present study deals with this environmental issue with samples from the waste rocks, and from the surrounding soils and surface water. The mineralogy of the waste rock was studied using EMPA, then a large number of elements in all waste rock, soil, and water samples were analyzed at a wide range of concentrations with high accuracy using an Elan6000 ICP-MS machine at Guangzhou Institute of Geochemistry, Chinese Academy of Sciences. The waste rock is composed mostly of black shales, with minor Mn carbonates. Both black shales and Mn carbonates of the waste rock contain many sulfide minerals, mainly pyrite, with minor galena, sphalerite, chalcopyrite, and others. The waste rocks are enriched in many metals including Sc, V, Cr, Co, Ni, Fe, Mn, Cu, Zn, Pb, Th, U, Mo, Sb, Sn, Tl, and others, and the metals are mostly hosted within the sulfides. Weathering of waste rocks might cause emission of the following metals： V, Cd, Ni, Th, U, Mo, Sb, Tl, Sc, Cr, Cu, Zn, Sn, and minor Co, and Pb. The surrounding soils are highly enriched in Cr, Co, Cu, Zn, Mn, Mo, Cd, Tl, and Pb, with the enrichment factors of 2.67.3.8, 7.26, 7.27, 8.2, 5.7, 13, and 5.4, respectively. The element ratios （Rb/Cs, Fe/Mn, Nb/Zr, Hf/Zr, and Ba/Sr） and REE distribution patterns of the soils are similar to those of the waste rocks and bedrocks.     

Environmental aspects of selected trace metals in soils and waters surrounding Singaran Nala, Raniganj Coalfield

The Raniganj Coalfield is the oldest coalfield in India that has been continuously and extensively mined since the late eighteenth century. The present study reports a geochemical investigation and environmental quality assessment using soil and water in the area surrounding a stream, locally known as Singaran Nala （Nala means storm water drains in Bengali）, in the Raniganj Coalfield. Soil （top soil, mud, silty clay and laterite） and rock samples （sandstone and shale） were collected from the study area and were analyzed for trace metals （Cr, Cu, Fe, Mn, Ni and Zn）. Surface waters from the stream and the Damodar River as well as ground waters from hand pumps and underground mine pits were collected. Water samples were analyzed for major ions （Na^＋, Ca^2＋, Mg^2＋, Cl^-, HNO3^- and SO4^2-） and trace metals （Cu, Fe, Mn, Ni, and Zn）. Trace metal concentrations in soil samples are found higher than the average world soil composition. Nevertheless, trace metal （Cr, Cu, Ni and Zn） concentrations in soils exceed or reach the maximum allowable concentrations （MAC） proposed by the European Commission for agricultural soils. In particular, Ni concentrations exceed the typical value for cultivated soils. Chromium, Cu and Ni concentrations in laterite and Cr concentration in topsoil exceed the ecotoxicological limit.