Towards a direct collapse–load method of design for concrete frames subjected to severe ground motions

Most current methods of design for concrete structures under earthquake loads rely on highly idealized ‘equivalent’ static representations of the seismic loads and linear‐elastic methods of structural analysis. With the continuing development of non‐linear methods of dynamic analysis for the overload behaviour and collapse of complete concrete structures, a more direct and more accurate design procedure becomes possible which considers conditions at system collapse. This paper describes an evaluation procedure that uses non‐linear dynamic collapse–load analysis together with global safety coefficients. A back‐calibration procedure for evaluating the global safety coefficients is also described. The aim of this paper is to open up discussion of alternative methods of design with improved accuracy which are necessary to move towards a direct collapse–load method of design. Copyright © 2002 John Wiley & Sons, Ltd.     

海底天然气渗漏形成水合物量的线性动力学模型:以墨西哥湾GC185区块Bush高地为例

世界许多地区如墨西哥湾，存在着大量天然气渗漏并形成水合物的现象，出于科学，生态，气候和安全的需要。人类有必要弄清存在于海底以水合成形式存在的天然气的比例。因此，构建了水合物形成量的线性动力学模型，以分析墨西哥湾GC185块区Bush高地海底渗漏天然气的地质过程和行为。Bush高地渗漏的天然气来源于附近的Jolliet气藏，结果表明，渗漏天然气中约有9％的海底形成了水合物。     

Premier pôle paléomagnétique,d'âge Moscovien contraint par un test du pli,obtenu dans le bassin d'Illizi (Craton saharien,Algérie)First palaeomagnetic pole,of Moscovian age constrained by a fold test,in the Illizi Basin (Saharan Craton,Algeria)

Palaeomagnetic study, carried out in the Moscovian (～305 Ma) formation in the Edjeleh anticline, shows the existence of three magnetisation components. Two of them are probably Cenozoic and Permian remagnetisations. The third component determined by both well defined ChRMs and remagnetisation circles analysis passes the fold test. Because the folding started before or during the Stephano-Autunian, this third component is the primary magnetisation. Its palaeomagnetic pole (28.3°S, 58.9°E), close to other poles from the Saharan platform obtained from neighbouring periods but without palaeomagnetic tests, confirms the age of these last data. To cite this article: B. Bayou et al., C. R. Geoscience 334 (2002) 81–87.     

非线性地球物理反演方法:回顾与展望

自20世纪90年代以来，非线性地球物理反演方法已走向成熟，这些方法包括线性化迭代法，仿真淬火法，遗传算法及联合反演方法等，线性化迭代反演基于开放物理系统状态发生相变的原理，要进一步改善模型参数化的技术和迭代过程的自组织；仿真淬火法与遗传算法基于自然过程的指数率或生物演化的优生率，可以相互结合以提高解估计的分辨率与置信度；联合反演要结合岩石物理性质的统计规律，才能取得兼容地质与综合方法的应用效果，地球动力学中的反问题不仅涉及偏微分方程系数项的求解，而且涉及初始条件或初始边界的求解，对地球动力学作用过程研究特别重要。     

Models of passive margin inversion: implications for the Rhenohercynian fold-and-thrust belt, Belgium and Germany

Positive tectonic inversion is related to the transmission of compressional stresses along a décollement into the foreland of an orogenic zone. This stress and strain concentration in regions remote from the main orogenic front is commonly related to the presence of pre-existing rheological heterogeneities such as normal syn-depositional faults. During inversion, these pre-existing normal faults are reactivated as reverse faults. Tectonic inversion in the Rhenohercynian fold-and-thrust belt during the Variscan Orogeny shows that inversion is likely synchronous with the onset of collision in the hinterland. Here, we present the results of a simplified thermo-mechanical model (STM) which allows one to study strain partitioning between two orogenic zones. We show that, if the two orogenic zones have the same mechanical properties, the viscosity of the décollement, which links them, controls the initial strain partitioning. During subsequent finite shortening, erosional processes determine the partitioning of strain rate. The presence of a weak structure in the inverted zone and of a low-viscosity décollement leads to initial strain concentration in the inverted track rather than in the collision zone and a progressive decrease in strain partitioning between the two orogenic zones. The STM results are in good agreement with results of a 2D finite-element model. We conclude that, in the western part of the Rhenohercynian Massif, simultaneous uplift and deformation within the Mid-German Crystalline Rise (the main collision zone) and the Ardenne Anticlinorium (the inverted zone) lead to interpreting this orogenic event as a case of vice tectonic rather than the propagation of a ‘wave of folding’ towards the Variscan front, as suggested by previous authors.     

天山西部中山带积雪变化趋势与气温和降水的关系——以巩乃斯河谷为例

根据位于巩乃斯河谷的天山积雪雪崩研究站近30年来的年最大雪深、月平均气温、月降水量观测记录，用平均差值法、最小二乘法、自回归滑动平均法检验了天山西部中山带积雪、冷季降水、冷季平均气温的变化趋势，结果表明，天山西部中山带积雪呈增加趋势，近30年来年平均增加1.43%，与青藏高原、南极大陆及格陵兰冰盖表面积雪积累增加相一致。天山西部中山带冷季气温和降水的变化趋势也是增加的，其中冷季降水平年平均增加0．12％，而冷季气温升高了0．8℃，积雪与冷季气温之间存在着弱的负相关关系，而与冷季降水呈显著的正相关关系。积雪的增加主要是因为气候变暖引起的冷季降水的增加对积雪增加的贡献大于由于冷季气温升高而造成积雪减少的贡献的结果。     

中国东部苏鲁榴辉岩超基性岩褶皱带的演化及其与大别(中国)和柯切塔夫(哈萨克斯坦)杂岩的对比(英文)

苏鲁褶皱带形成于元古宙 (2 2 33～ 185 5Ma)典型优地槽构造环境 ,主要由石榴橄榄岩、石榴辉石岩、榴辉岩等侵入岩 (柯石英深度相地幔岩浆房中形成 )和它们的火山沉积建造围岩一起经褶皱、变质而形成。变质作用经历了先蓝片岩相 (前花岗岩 )后片麻岩混合岩相过程。由于变质作用的不规律性 ,苏鲁褶皱带可分为 2个构造带 :(1)东部构造带 (蓝片岩 )和 (2 )西部构造带 (片麻岩混合岩 )。根据A·都城秋穗所识别的变质带系统 ,可将其作为一个双变质带。东部构造带以出现许多块状、条带状榴辉岩辉石岩橄榄岩组合的残余岩块为特征 ,其中还残留着高压的矿物 (石榴石、绿辉石、柯石英 ) ,而且有被混合岩和各种交代岩替代的显著标志。在中生代 ,苏鲁元古褶皱带受造山作用的影响活化 ,导致许多花岗岩体的侵入 ,使交代岩广泛发育。     

Flexural subsidence by 29 Ma on the NE edge of Tibet from the magnetostratigraphy of Linxia Basin, China

This study provides a detailed magnetostratigraphic record of subsidence in the Linxia Basin, documenting a 27 Myr long sedimentary record from the northeastern edge of the Tibetan Plateau. Deposition in the Linxia Basin began at 29 Ma and continued nearly uninterruptedly until 1.7 Ma. Increasing rates of subsidence between 29 and 6 Ma in the Linxia Basin suggest deposition in the foredeep portion of a flexural basin and constrain the timing of shortening in the northeastern margin of the plateau to Late Oligocene–Late Miocene time. By Late Miocene–Early Pliocene time, a decrease in subsidence rates in the Linxia Basin associated with thrust faulting and a 10° clockwise rotation in the basin indicates that the deformation front of the Tibetan plateau had propagated into the currently deforming region northeast of the plateau.     

Decoupled seismic analysis of an earth dam

The seismic stability of an earth dam is evaluated via the decoupled displacement analysis using the accelerograms obtained by ground response analysis to compute the earthquake-induced displacements. The response analysis of the dam is carried out under both 1D and 2D conditions, incorporating the non-linear soil behaviour through the equivalent linear method. Ten artificial and five real accelerograms were used as input motions and four different depths were assumed for the bedrock.1D and 2D response analyses were in a fair agreement with the exception of the top third of the dam where only a 2D modelling of the problem could ensure that the acceleration field is properly described. The acceleration amplification ratio obtained in the 2D analyses was equal to about 2 in all the cases considered, consistently with data from real case histories.The maximum permanent displacements computed by the sliding block analysis were small, being less than 10% of the service freeboard; a satisfactory performance of the dam can then be envisaged for any of the seismic scenarios considered in the analyses.