M5'模型树算法和无人机航拍影像在震后崩塌滑坡分析中的应用——以鲁甸M_S6.5地震为例

利用高分辨率无人机航拍影像,结合基本地质资料,分析了影响2014年8月3日鲁甸M_S6.5地震震后崩塌滑坡分布的主要因素,使用M5'模型树算法建立了崩塌滑坡密度与其影响因子间的分段线性模型,并检验了该模型的预测性能。结果表明,地震诱发的崩塌滑坡分布受断层距、岩土体结构强度、坡度、植被条件等的影响,其中,断层距、岩土体结构强度及坡度等为主要影响因素;崩塌滑坡易发生在结构破裂区及坡度为38°~50°的区域,其分布密度随断层距的增加而减小;利用M5'模型树算法建立的模型体现出崩塌滑坡分布与其影响因子间复杂的非线性关系,模型检验结果显示,理论模型与实际关联函数间的相关系数达到0.88,因此,可利用该模型预测地震诱发的崩塌滑坡的分布。     

前板可旋转的双垂板结构水动力特性的理论研究

振荡水柱波能转换装置的最大转换效率往往受到腔内水柱共振机制的直接影响。通过对装置的基本结构进行简化,提出了一种前墙可绕固定轴旋转的双垂板式结构系统,旨在通过前墙的旋转运动进一步加剧水柱的振荡,从而对腔内水柱的共振机制进行调节和控制。基于线性波理论,采用匹配特征函数展开法对波浪与双垂板结构的相互作用进行理论研究,针对流场在结构物尖角附近的奇异性特征,将公共界面上的速度分布基于切比雪夫多项式近似展开,并应用区域间的速度与压力连续条件进行求解。通过分析结构的几何参数对反射透射系数、平均波面高程、前墙旋转振幅以及前墙与水面间相位差的影响,深究其共振机理,为振荡水柱波能转换装置的效率优化机制提供理论依据。结果表明,在所研究的波浪频率范围内,前墙的自由旋转运动会加剧板间的平均波面高程,应用于波浪能转换装置中能进一步拓宽高效频率带宽。     

C60全珊瑚海水混凝土的钢筋锈蚀行为研究

采用线性极化电阻法,测试了C60全珊瑚海水混凝土（coral aggregate seawater concrete,简称CASC）的线性极化曲线、自腐蚀电位（E_corr）和极化电阻（R_p）,研究了不同暴露时间、不同种类钢筋CASC的钢筋腐蚀行为,提出了提升岛礁CASC结构耐久性的建议措施。结果表明：随着暴露时间的延长,CASC的E_corr和R_p均逐渐降低,钢筋的耐蚀性能逐渐减弱。不同种类钢筋CASC耐蚀性能规律为：316不锈钢筋优于有机新涂层钢筋,优于普通钢筋。即使暴露0 d,CASC中普通钢筋仍会发生锈蚀,表明普通钢筋在不附加任何防腐措施的条件下不适用于岛礁CASC结构。综合分析阻锈效果和成本因素,316不锈钢筋的性价比明显低于有机新涂层钢筋,建议岛礁CASC工程优先选用有机新涂层钢筋。     

Evapotranspiration is resilient in the face of land cover and climate change in a humid temperate catchment

In temperate humid catchments, evapotranspiration returns more than half of the annual precipitation to the atmosphere, thereby determining the balance available to recharge groundwaters and support stream flow and lake levels. Changes in evapotranspiration rates and, therefore, catchment hydrology could be driven by changes in land use or climate. Here, we examine the catchment water balance over the past 50 years for a catchment in southwest Michigan covered by cropland, grassland, forest, and wetlands. Over the study period, about 27% of the catchment has been abandoned from row‐crop agriculture to perennial vegetation and about 20% of the catchment has reverted to deciduous forest, and the climate has warmed by 1.14 °C. Despite these changes in land use, the precipitation and stream discharge, and by inference catchment‐scale evapotranspiration, have been stable over the study period. The remarkably stable rates of evapotranspirative water loss from the catchment across a period of significant land cover change suggest that rainfed annual crops and perennial vegetation do not differ greatly in evapotranspiration rates, and this is supported by measurements of evapotranspiration from various vegetation types based on soil water monitoring in the same catchment. Compensating changes in the other meteorological drivers of evaporative water demand besides air temperature—wind speed, atmospheric humidity, and net radiation—are also possible but cannot be evaluated due to insufficient local data across the 50‐year period. Regardless of the explanation, this study shows that the water balance of this landscape has been resilient in the face of both land cover and climate change over the past 50 years.     

基于CSI效应的直线电机驱动塔系结构风振控制研究

控制系统与结构振动的相互作用(Control Structure Interaction,简称CSI)广泛存在于结构与主动控制系统之间,然而目前在直线电机驱动的塔系结构风振控制研究中往往没有充分考虑CSI效应,使得理论控制效果与实际控制效果存在偏差。为了考察CSI效应对塔系结构风振控制的影响,首先以电磁驱动AMD系统"电-力-运动"相互关系模型为基础,建立考虑CSI效应的塔系结构直线电机驱动AMD风振控制系统模型;其次综合权衡计算效率和控制精度的关系,选取考虑低阶CSI效应模型以及最经典的LQR控制算法。在此基础上,对该塔系结构确定是否考虑CSI效应进行相应的控制分析。结果表明,CSI效应在塔系结构风振控制中起着重要的作用,制定与实际工程结合更佳的直线电机驱动AMD系统风振控制方案中需要考虑CSI效应,为以后在实际工程中推广应用提供一种新思路。     

Response of hybrid isolation system during a shake table experiment of a full‐scale isolated building

A full‐scale 5‐story steel moment frame building was subjected to a series of earthquake excitations using the E‐Defense shake table in August, 2011. For one of the test configurations, the building was seismically isolated by a hybrid system of lead‐rubber bearings and low friction roller bearings known as cross‐linear bearings, and was designed for a very rare 100 000‐year return period earthquake at a Central and Eastern US soil site. The building was subject to 15 trials including sinusoidal input, recorded motions and simulated earthquakes, 2D and 3D input, and a range of intensities including some beyond the design basis level. The experimental program was one of the first system‐level full‐scale validations of seismic isolation and the first known full‐scale experiment of a hybrid isolation system incorporating lead‐rubber and low friction bearings. Stable response of the hybrid isolation system was demonstrated at displacement demands up to 550 mm and shear strain in excess of 200%. Torsional amplifications were within the new factor stipulated by the code provisions. Axial force was observed to transfer from the lead‐rubber bearings to the cross‐linear bearings at large displacements, and the force transfer at large displacements exceeded that predicted by basic calculations. The force transfer occurred primarily because of the flexural rigidity of the base diaphragm and the larger vertical stiffness of the cross‐linear bearings relative to the lead‐rubber bearings.     

基于多元线性回归方法的砌体结构加固费用估算模型研究

为建立适用于砌体结构的加固费用快速估算模型,对中国陕西、山西、四川等地砌体结构建筑物的历史加固费用及相关建筑参数进行统计,建立涵盖35栋砌体结构建筑物加固费用估算模型的回归与验证数据库,同时对影响加固费用的各建筑参数作显著性分析,并基于后向消去的多元线性回归方法,利用SPSS统计分析软件对已采集的加固数据进行回归,得到4个费用估算模型;按照相应评价准则分别对各模型进行评价,提出一套最优的砌体结构加固费用快速估算模型,并对该回归模型进行验证分析。回归得到的费用估算模型满足精度要求,具有一定的工程应用价值。     

Non‐linear seismic response of arch dams with contraction joint opening and joint reinforcements

A comprehensive study of non‐linear seismic response of arch dams with contraction joint opening and joint reinforcements has been conducted. A numerical model of contraction joint reinforcements is presented for optimization control of the joint opening. The objective of this control is to reduce the joint opening and expectantly to balance the sustained loads between the horizontal and the vertical components of the dam, thus avoiding an overstress in the cantilever while retaining the release of arch tensile stresses to some extent. Several parameter studies such as critical element size and required number of joints to be simulated for convergence are also performed. As an engineering application, a 292‐m high arch dam (the Xiaowan arch dam) and the Big Tujunga dam are analysed in detail. The results demonstrate that the joint opening and the corresponding load transfer from the arch to cantilever components of the dam during strong earthquakes are substantial. It is also evident that by providing sufficient strength and reinforcement flexibility, the joint opening can be controlled to some extent. However, the stress redistribution due to reinforcement control is not sufficient to avoid the overstress in the cantilever for the Xiaowan arch dam. Thus, alternative measures are discussed. Copyright © 2000 John Wiley & Sons, Ltd.     

Modeling of an actively braced full‐scale building considering control–structure interaction

Recently, the application of active control to seismic‐excited buildings has attracted international attention. To demonstrate the practical applicability of active control, we have conducted experimental tests using a full‐scale three‐storey building equipped with active bracing systems on the shake table at the National Center for Research on Earthquake Engineering (NCREE), Taiwan. Experimental results indicate that the control–structure interaction (CSI) effect is significant. A state‐space analytical model of this actively controlled building taking into account the CSI effect is established in this paper using a system identification technique based on curve‐fitting of transfer functions. To verify the accuracy of the analytical model for simulating the controlled response, four sets of linear quadratic Gaussian (LQG) controllers using acceleration feedback are designed and further experimental tests are conducted for comparison. It is demonstrated that the correlations between the simulation and experimental results are remarkable. The construction of an accurate analytical model is important for active control, and such an analytical model can be used for future benchmark studies of different control algorithms based on numerical simulations. Copyright © 2000 John Wiley & Sons, Ltd.