基于UDF的水平轴潮流能水轮机被动旋转水动力性能研究

针对水平轴潮流能水轮机被动旋转问题,基于Fluent 17.0,运用UDF(User Defined Function)控制滑移网格对网格进行动态调整,仿真研究水轮机在不同安放角下被动旋转的水动力特性。通过仿真分析,结果表明:潮流能水轮机随着叶片安放角度的增加,尖速比、输出功率、捕能系数都是先增大后减小,叶片安放角为6°时,叶轮前后速度差最大,对潮流能利用充分,且各项性能均达到最佳;通过分析叶片受力,叶尖叶素在安放角为2°时阻力最大,3°时升力最大,升阻比在6°时最大,此时叶尖叶素升阻比C_L/C_D=6.27、攻角α=3.06°。由仿真结果可知水平轴潮流能叶轮的自启动过程由5个阶段组成,即加速度增大的加速运动段—加速度减小的加速运动段—加速度反向增大的减速运动段—加速度反向减小的减速运动段—稳定运行段,这对潮流能水轮机的设计具有重要的指导意义。     

碱性玄武岩形成的时限及其地质意义

中国华北克拉通及邻区的早前寒武纪不存在碱性玄武岩。全球范围内碱性玄武岩的形成也存在时限性，它们在中新生代以来相对大量的出现。碱性玄武岩可划分为钾质碱性玄武岩和钠质碱性玄武岩两大类，后者还可作进一步划分。它们在同位素组成和元素组成上存在相互过渡的变化，这与地幔源区外来加入物质的种类和比例不同有关。高压和低程度熔融是所有碱性玄武岩形成的必要条件。研究表明，碱性玄武岩形成具时限性主要与地球热状态从热向冷的历史演化有关。碱性玄武岩的形成需要地幔俯冲作用，可达到相当深度的地幔俯冲作用只是到了太古宙以后才发生，并在中新生代以来达到高潮。     

行星际等离子区对火星探测器距离观测量的影响

根据Muhleman和Anderson在1981年给出的行星际空间等离子体密度模型,模拟计算了行星际等离子区对8GHz电波的距离延迟与太阳-地球-航天器夹角(SEP)和光路径长度(L)的关系。结果显示,在本文的模拟条件下,距离延迟随SEP和L从几毫米变化到几十米。最后,分别仿真了一条地火转移轨道和环火星轨道,计算了两种情况下行星际等离子区延迟对测站到航天器距离观测量的影响。     

关于非齐次马氏链的强极限定理

主要研究了非齐次马氏链的强极限定理.首先应用鞅差序列收敛定理给出了关于非齐次马氏链的任意k元函数一类平均值的极限定理.最后得到一系列相关状态序偶出现频率的推论.     

���ݵ�������ѵ���ֵģ��

?????????????????????????????????????GPS????????????????????????????????????????4?????????????????????????????????????????????????????????????????????????壻??????????????????????????????????????????壻?齭???????????????????????????????????塣???????????????????????ζ?????????????????????????????????????????????κ??齭???????????????????????????????????????????????     

三维旋转扫描测量平台设计与实现

本设计主要用于360°旋转的三维扫描,实现角度数据的实时获取。设计中采用单片机控制交流伺服电机进行自定的角度、速度与方向的旋转并实时上传时间、角度数据至上位机进行处理,实现了对平台旋转精度的控制与检测,着重研究了该传感器误差源的产生,对实际应用中的误差进行了定量分析,利用偏心改正、4分频等方法减少了误差,提高了参数精度。角度范围为360°,角度分辨率为0.01°。     

后差分GPS测量则木河断裂地震微地貌特征

地震微地貌是研究古地震的重要证据。 发生在则木河断裂带上的1850年地震的地表破裂带在人类活动较少的地区得以保存完好。 研究区内地形起伏大, 断塞塘、 断层陡坎、 鼓包等微地震地貌特征明显, 在三维视图内可直观反映测量区内的这些地貌特征。 利用后差分GPS方法测量断裂活动形成的地震微地貌, 水平测量精度可达0.5 m, DEM精度可到一个像元1 m, 是定量化研究地震微地貌的一种新方法。 测量结果表明, 大箐梁子顶部七条干沟对应多次古地震事件; 大箐梁子顶部鼓包被断裂断错, 断塞塘沉积区向南迁移, 鼓包最新断错约4 m, 大箐村南山坡形成50 cm高断层陡坎。 说明大箐梁子一带地震活动性较强, 且以挤压构造为主。     

Limit states and failure mechanisms of viscous dampers and the implications for large earthquakes

Fluid viscous dampers are used to control story drifts and member forces in structures during earthquake events. These elements provide satisfactory performance at the design‐level or maximum considered earthquake. However, buildings using fluid viscous dampers have not been subjected to very large earthquakes with intensities greater than the design and maximum considered events. Furthermore, an extensive database of viscous damper performance during large seismic events does not exist. To address these issues, a comprehensive analytical and experimental investigation was conducted to determine the performance of damped structures subjected to large earthquakes. A critical component of this research was the development and verification of a detailed viscous damper mathematical model that incorporates limit states. The development of this model and the laboratory and simulation results conclude good correlation with the new model and the damper limit states and provide superior results compared with the typical damper model when considering near collapse evaluation of structures. Copyright © 2010 John Wiley & Sons, Ltd.     

Macroscopic criteria for Green type porous materials with spheroidal voids: application to double porous materials

Combined effects of matrix plastic compressibility and void shape are investigated for ductile porous materials. To this end, a spheroidal volume containing a confocal spheroidal (prolate or oblate) void subjected to uniform strain rate boundary conditions has been first studied. A Green type matrix is chosen as a prototype for investigating effects of plastic compressibility. This is carried out by using a kinematics limit analysis theory from which a closed‐form expression of the macroscopic criterion is established for the considered class of materials. These results are then extended to ductile porous materials made up of a green matrix containing randomly oriented spheroidal voids. In the framework of a two‐step homogenization procedure, the obtained results are implemented to describe the macroscopic behavior of double porous materials involving spherical voids at the microscale and randomly oriented and distributed spheroidal voids at the mesoscale. For validation purpose, the new derived criteria are assessed and validated by comparing their predictions to available upper bounds and numerical data from literature. Copyright © 2017 John Wiley & Sons, Ltd.     

The effect of pore water pressure on tunnel face stability

The kinematic approach in combination with numerical simulation is used to examine the effect of pore water pressure on tunnel face stability. Pore water pressure distribution obtained by numerical calculations using FLAC^3D is used to interpolate the pore water pressure on a 3D rotational collapse mechanism. Comparisons are made to check the present approach against other solutions, showing that the present approach improves the existing upper bound solutions. Results obtained indicate that critical effective face pressure increases with water table elevation. Several normalized charts are also presented for quick evaluation of tunnel face stability. At the end of the paper, the influence of anisotropic permeability on tunnel face stability is also discussed, showing that the isotropic model leads to an overestimation of the necessary tunnel face pressure for anisotropic soils. Copyright © 2016 John Wiley & Sons, Ltd.