折射/谐衍射红外双波段成像光谱仪系统研究

为了获取足够的目标信息,充分利用中波红外和长波红外的光谱信息,建立了谐衍射中、长波红外超光谱成像系统.利用谐衍射元件独特的色散特性,将谐衍射透镜应用于中、长波红外超光谱成像系统中,使系统在中波红外3.7—4.8 μm和长波红外8—12 μm的2个红外大气窗口内获取数百个光谱图像.设计结果表明,中波红外波段,在18对线/mm处光学系统的调制传递函数(MTF)大于0.55;长波红外波段,在13对线/mm处光学系统的MTF大于0.5;光学系统的衍射环绕能,在中波红外波段30 μm半径范围内大于85%,在长波红外     

基于数码相机立体像对的物体3维信息快速获取方法

研究了数码相机的内方位元素检测和镜头畸变差校正，应用近景摄影测量的原理与方法，提出了一种基于立体像对无物方控制的物体表面3维模型信息快速获取方法，试验表明，该方法获取3维信息速度快、精度较高。同时文中还比较了可变焦数码相机和固定焦距相机在获取3维信息精度方面的差异。     

激光热透镜光谱法测定地质样品中微量钼的研究

作者对激光热透镜光谱法测定微量钼进行了研究．试验表明，在丙酮介质中，Ｍｏ６＋能被还原成Ｍｏ５＋并形成钼蓝同多酸，最大吸收彼长在６７０ｕｍ处，利用Ｈｅ－Ｎｅ激光器输出的６３２．８ｕｍ的激光作光源，进行微量钼的热透镜法分析测定．两酮的存在能增强热透镜信号强度。钼含量在０．０１—２．０μｇ／ｍＬ范围内与激光热透镜信号强度呈良好的线性关系，方法检出限为０．００５μｇ／ｍＬ钼，已用于地质样品中微量钼的高灵敏度测定．结果满意．     

偏光显微镜聚敛光系统光路分析

通过实验和计算，文章证明了勃氏镜进入显微光路后，可使整个显微镜系统变成望远系统，望远系统接收平行光信号，形成干涉图或偏光图像，而显微系统接收非平行光信号形成矿物像，文章不仅对偏光图和干涉图在显微镜筒中的光路变化及成像机理进行了深入讨论，并且对如何保持干涉图和偏光图像清晰提出了调试意见。     

根据含超压气体裂隙震源模式讨论P波初动符号的分布

利用含超压气体裂隙震源模式［１］分析研究了Ｐ波初动符号的分布．根据理论推导,不同倾角含超压气体裂隙可分别形成Ｐ波初动符号的四象限分布图象和圆、椭圆、抛物线、双曲线等圆锥曲线形Ｐ波节线．按节线形状和失稳方式进行了地震分类．所推论的初动Ｐ波、Ｓ波振幅分布规律和地形变特征都与实际相符     

Sea‐level rise impact on fresh groundwater lenses in two‐layer small islands

The fresh groundwater lenses (FGLs) of small islands can be highly vulnerable to climate change impacts, including sea‐level rise (SLR). Many real cases of atoll or sandy islands involve two‐layer hydrogeological conceptualizations. In this paper, the influential factors that affect FGLs in two‐layer small islands subject to SLR are investigated. An analytical solution describing FGLs in circular islands, composed of two geological layers, is developed for the simplified case of steady‐state and sharp‐interface conditions. An application of the developed model is demonstrated to estimate the FGL thickness of some real‐world islands by comparison with existing FGL thickness data. Furthermore, numerical modelling is applied to extend the analysis to consider dispersion effects and to confirm comparable results for both cases. Sensitivity analyses are used to assess the importance of land‐surface inundation caused by SLR, relative to other parameters (i.e. thickness of aquifer layers, hydraulic conductivity, recharge rate and land‐surface slope) that influence the FGL. Dimensionless parameters are used to generalize the findings. The results demonstrate that land‐surface inundation has a considerable impact on a FGL influenced by SLR, as expected, although the FGL volume is more sensitive to recharge, aquifer thickness and hydraulic conductivity than SLR impacts, considering typical parameter ranges. The methodology presented in this study provides water resource managers with a rapid‐assessment tool for evaluating the likely impacts of SLR and accompanying LSI on FGLs.     

梵净山地区板溪群红子溪组钙质岩系中大理岩透镜体成因探讨

梵净山地区板溪群红子溪组钙质岩系中广泛发育大理岩透镜体。形成此岩系的控制因素可能为振荡频繁的构造运动或气候条件。通过仔细观察,发现大理岩透镜体有条带状、似层状断续产出2种,初步认为透镜体是成岩过程中差异性压实作用的产物,不是某种环境沉积的透镜体。     

The orientation of sorted stripes in the maritime subantarctic,Marion Island

The orientation of sorted stripes developed in glacial deposits on Marion Island is examined. This study confirms earlier reports of preferential occurrence of sorted stripes on windward slopes. However, sorted stripes were also found to occur on low angle leeward slopes. Mechanisms for the orientation of sorted stripes by wind action are discussed. Copyright © 2001 John Wiley & Sons, Ltd.     

饱和度-压力曲线法预测柴油在毛细带中形成的透镜体厚度

轻非水相液体（LNAPL）进入到地下环境中,首先在非饱和带进行垂向迁移,到达毛细带后在地下水面以上形成饱和透镜体。准确预测LNAPL渗漏在毛细带形成的透镜体厚度,对于LNAPL的去除及污染含水层的修复具有重要的指导意义。通过模拟实验测定了水-油两相吸湿及脱湿曲线,采用水-油饱和度-压力曲线拟合出了吸湿及脱湿进入压力。根据透镜体达到稳定状态时脱湿、吸湿压力水头之间的关系,建立了透镜体厚度的预测计算方法,并以中砂和粗砂为例,预测出实验条件下柴油在毛细带形成透镜体稳定时的厚度分别为4.61 cm和1.29 cm。通过室内模拟槽实验,测得柴油在中砂和粗砂中迁移时形成的透镜体厚度分别为5.30 cm和1.50 cm。预测与实验结果的相对误差分别为13.0%和14.0%。误差产生的主要原因为脱湿与吸湿曲线是在非干燥情况下测得,从而导致预测的透镜体厚度偏小。