一种新型非线性滤波理论及其应用

研究一种新型的非线性滤波理论,即Unscented卡尔曼滤波（UKF）,同时为了获得更高的计算效率和确保协方差阵的非负定性,研究了平方根UKF。将UKF和平方根UKF应用到星载GPS卫星定轨中,实际算例表明UKF和平方根UKF的性能要优于常用的推广卡尔曼滤波的性能。     

Using Topological Relationships to Inform a Data Integration Process

When spatial datasets are overlaid, corresponding features do not always coincide. This may be a result of the datasets having differing quality characteristics, being captured at different scales or perhaps being in different projections or datums. Data integration methods have been developed to bring such datasets into alignment. Although these methods attempt to maintain topological relationships within each dataset, spatial relationships between features in different datasets are generally not considered. The preservation of inter‐dataset topology is a research area of considerable current interest. This research addresses the preservation of topology within a data integration process. It describes the functional models established to represent a number of spatial relationships as observation equations. These are used to provide additional information concerning the relative positions of features. Since many topological relationships are best modelled as inequalities, an algorithm is developed to accommodate such relationships. The method, based on least squares with inequalities (LSI), is tested on simulated and real datasets. Results are presented to illustrate the optimal positioning solutions determined using all of the available information. In addition, updated quality parameters are provided at the level of the individual coordinate, enabling communication of local variation in the resultant quality of the integrated datasets.     

土地调查中有关城镇与农村土地面积问题的研究

第二次全国土地调查工作中,城镇与农村地区的土地面积在计算方法上有所不同：农村地区的土地面积是以椭球面为基准的面积,即球面面积;城镇地区的土地面积是以平面为基准的面积,即平面面积。二者之间存在差异并按一定规律变化,当调查区处于投影带边缘附近时,同一图斑的球面面积与平面面积之间的差异达到最大。由于采用不同的计算方法而导致面积数量的差异,在进行农村与城镇有关土地数据整合时会出现矛盾。为了建立城乡统一的土地管理信息系统,保证土地面积的一致性,应当采取相应措施消除二者之间的差异。     

抗差最小二乘配置在数字化地图几何纠正中的应用讨论

抗差估计具有较好的抗拒异常观测值及粗差的能力,而最小二乘配置又能较好地处理系统误差,本文结合两者的优点,利用抗差最小二乘配置对数字化地图进行几何纠正,其中对协方差函数采用抗差拟合,得到了较好的结果。实验证明在GIS数据处理的扫描数字化地图几何纠正中,抗差最小二乘配置在抗拒异常值和处理系统误差方面优于单纯的最小二乘估计和单纯的最小二乘配置方法。     

Comparison of structural and least-squares lines for estimating geologic relations

Two different goals in fitting straight lines to data are to estimate a true linear relation (physical law) and to predict values of the dependent variable with the smallest possible error. Regarding the first goal, a Monte Carlo study indicated that the structural-analysis (SA) method of fitting straight lines to data is superior to the ordinary least-squares (OLS) method for estimating true straight-line relations. Number of data points, slope and intercept of the true relation, and variances of the errors associated with the independent (X) and dependent (Y) variables influence the degree of agreement. For example, differences between the two line-fitting methods decrease as error in X becomes small relative to error in Y. Regarding the second goal—predicting the dependent variable—OLS is better than SA. Again, the difference diminishes as X takes on less error relative to Y. With respect to estimation of slope and intercept and prediction of Y, agreement between Monte Carlo results and large-sample theory was very good for sample sizes of 100, and fair to good for sample sizes of 20. The procedures and error measures are illustrated with two geologic examples.     

航天INSAR复影像对的自动快速匹配

针对航天INSAR主、辅影像数据的特点，提出了加大匹配窗口、加大锚点间隔的匹配策略，以提高匹配的可靠性和速度。在匹配过程中，综合利用轨道参数和强度影像金字塔进行粗匹配，并对强度影像采用相关系数与最小二乘相结合的双向匹配方案，实现了自动、快速、高可靠性和高精度的航天INSAR复影像匹配。最后总结了航天INSAR复影像匹配的特点。     

EFG法在土体固结中的应用

EFGM作为一种新的数值计算方法，具有只需节点信息而无段单元的特性，故在解固结方程方面有很大的优势。在计算分析中，此法容易构造固结方程的EFGM刚度矩阵和处理不同边界条件。对单面排水等条件的计算结果表明，EFGM在解决固结变形问题上，精度较高，处理边界准确。     

改进的最小二乘法在水文分析计算中的应用

在水分析计算中，经常涉及到变量之间的线性或非线性拟合，而在拟合各种特性曲线时，通常应用以实测资料与拟合曲线间的误差平方和最小作为目标函数的方法——最小二乘法，但这种方法忽视了所有实测点应与拟合曲线间的相对误差尽量不超过某一百分比的原则，为了达到上述要求，提出了非线性的加权最小二乘法及线性相关方程的最小距离平方和法，探讨改进了传统的最小二乘法达到优化的效果。最小距离平方和法与常用的图解法相比，本法所得成果较为客观；与传统的单方向(x或y方向)最小二乘回归法相比，所求线性方程不会因坐标系的选取而改变。最后应用算例进行了初步讨论。