Implementation of a coupled plastic damage distinct lattice spring model for dynamic crack propagation in geomaterials

This paper studies dynamic crack propagation by employing the distinct lattice spring model (DLSM) and 3‐dimensional (3D) printing technique. A damage‐plasticity model was developed and implemented in a 2D DLSM. Applicability of the damage‐plasticity DLSM was verified against analytical elastic solutions and experimental results for crack propagation. As a physical analogy, dynamic fracturing tests were conducted on 3D printed specimens using the split Hopkinson pressure bar. The dynamic stress intensity factors were recorded, and crack paths were captured by a high‐speed camera. A parametric study was conducted to find the influences of the parameters on cracking behaviors, including initial and peak fracture toughness, crack speed, and crack patterns. Finally, selection of parameters for the damage‐plasticity model was determined through the comparison of numerical predictions and the experimentally observed cracking features.     

基于分区的局域神经网络时空建模方法研究

区域数据表现为两种尺度的空间特性:反映全局特征的空间依赖性和反映局域特征的空间波动性.空间波动性表现为空间数据在局部地区的聚集或高低交错现象.在研究区域数据时空预测性建模时,从降低数据的空间波动和不平稳性对模型预测能力的影响角度出发,提出了一种基于分区的局域神经网络时空非线性建模的思路.分区过程由基于空间邻接关系的K-means聚类算法完成.不同的分区方案通过相关性、波动性、紧凑性等指标进行评价和优选.在确定最优分区方案的基础上,对各子区分别采用两层前馈网络进行建模,模型的输入不仅要考虑本区内单元的作用,而且要考虑相邻子区的边界效应.各神经网络模型的时空预测能力通过平均相均差和动态相似率等指标进行衡量.最后,通过对法国94个县每周流感报告病例的时空建模分析表明,与全局神经网络模型相比,基于分区的局域神经网络模型具有更好的预测能力.     

Taxonomical and Biogeochemical Investigation of Elements in Holocene Mollusk Shells in the South and Southwestern Marmara Basin,Turkey

Concentrations of some heavy metals and trace elements such as Cr, Ga, Ni, Zn, Mo, Cu, Pb, Yb, Y, Nb, Ti, Sr, Ba, Mn, Sc, Co, V, Zr, Fe, Al, W, Se, Bi, Sb, As, Cd in recent mollusk shells and factors affecting their distribution and deposits collected from various depths in the southern and southwestern parts of the Marmara Sea are investigated. The distribution of the elements in the shells is categorized into four groups. Of these, concentrations of 12 elements （As, Bi, Cd, Co, Ga, Mo, Nb, Sb, Se, Sc, W and Yb） are below zero [（0.053-0.79）×10^-6]; concentrations of seven elements （Cr, Ni, Pb, V, Y, Zr and Cu） are （1.0-6.0）×10^-6; concentrations of four elements （Ti, Mn, Ba and Zn） are 10- 20×10^-6; and concentrations of five elements （Si, Al, Fe, Mg and Sr） are （47.44-268.11）×10^-6. The taxonomic characteristics of the 29 elements were studied separately in mollusk shells such as Chamalea gallina （Linn6）, Pitar rudis （Poli）, Nassarius reticulatus （Linn6）, Venerupis senescens （Coocconi）, Mytilus galloprovincialis （Lamarck）, Mytilaster lineatus （Gemelin in Linne） and Chlamys glabra. It was found that, in mollusk taxonomy, the elements have unique values. In other words, element concentrations in various mollusk shells depend mainly on the taxonomic characteristics of mollusks. In various bionomic environments different element distributions of the same species are attributed to the different geochemical characters of the each environment. Data obtained in this study indicate that the organisms are the most active and deterministic factors of the environment.     

广州科学城保利林语山庄高边坡支护工程的实践

主要介绍了广州科学城保利林语山庄高边坡支护设计方案与施工方法。支护方案综合采用了锚索、锚杆、抗滑桩、钢管桩、格构梁及挡土墙等多种支护方法，有效地提高了边坡的稳定性。应用有限元方法来验证设计方案的合理性，模拟结果与工程实践基本吻合。     

滑坡治理中格构锚固结构的解析解分析

在分析格构锚固结构受力的基础上 ,将格构梁简化为受集中力作用的弹性地基上的梁 ,提出了格构锚固结构的力学模型 ,利用 Winkler弹性地基上梁的解析解对格构梁进行了内力和变形的分析 ,发现格构梁的受力状况受弹性特征λ、梁格间距 ls以及悬臂长度影响 ;建议梁长 l与λ宜满足 lλ≥ 2π;采用较小间距的格构梁以及小吨位锚索 ,间距宜满足 lsλ<π/ 2 ,悬臂长度取 (0 .3～ 0 .5 ) ls,并将分析结论应用于三峡库区巴东太矶头东滑坡治理工程的设计中     

单层柱面网壳弹塑性地震反应特征

本文对网壳结构的弹塑性抗震性能进行了探讨。根据结构弹性有限元理论，结合网壳结构受力特点，推导出网壳结构单元的弹塑性矩阵表达式。然后对单层柱面网壳结构的弹塑性地震反应进行了具体分析，给出了节点位移和杆件应力变化规律，并讨论了矢跨比变化对网壳弹塑性性能的影响，从而揭示出这类网壳的弹塑性地震反应特点。     

Application of extended distinct element method with lattice model to collapse analysis of RC bridges

This paper proposes a simple lattice model for collapse analysis of RC bridges subjected to earthquakes by using the extended distinct element method (EDEM). In the model, a concrete element consists of lumped masses connected to one another by springs, and a reinforcement bar is represented by a discrete model or an integrated model. The proposed lattice model is simple but its parameters are reasonably defined. It has fewer element nodes and connecting springs, which will be of benefit by shortening the CPU time. The processes to determine the initial stiffness of concrete and steel springs, the parameters of the constitutive model and the fracture criteria for springs are described. A re‐contact spring model is also proposed to simulate the re‐contact of the concrete after fracture of springs; and a general grid searching method is used to decrease the CPU time for judging re‐contact after fracture. The lattice model is assessed by numerical simulations and experiments. As an application, a damaged single‐column pier subjected to the Kobe Earthquake in 1995 is analysed by EDEM with the proposed model. The simulation results indicate that the proposed model predicts well qualitatively the collapse process of RC bridges. Copyright © 2003 John Wiley & Sons, Ltd.     

湖南黄金洞金矿毒砂中Au赋存状态的电子探针研究

本文利用ＪＸＡ－８８００Ｍ超大型电子探针，以湖南黄金洞金矿含金毒砂为研究对象。利用金特征Ｘ－射线扫描方法和微区含金含量，对不可见金赋存状态的研究方法和温试条件进行了探索，先观察背散射电子图像，排除金在含金矿物毒砂中呈显显微颗粒存在的可能性，继而用ＬｉＦ晶体测定金Ｌ＝８８．７６Ｌａｌ峰位，然后逐渐放大倍数（ｘ３００，ｘ１０００，ｘ５０００，ｘ３００００，ｘ２０００００）进行金特征，Ｘ－射线连续测量，，结果发现金元素总 是均匀分布在重砂中，从而证实了金呈品格金形式存在的推测。     

格子Boltzmann方法地震波场模拟

格子Ｂｏｌｔｚｍａｎｎ方法是细胞自动机在某些学科中的具体化和应用。它根据微观运动过程的某些基本特征建立简化的、时间和空间完全离散的动力学模型，这种模型的平行行为符合宏观的微分方程。