钢套管灌注群桩施工顺序对多隧道的影响

通过理论研究和数值分析方法,分析了钢套管桩不同的施工顺序对邻近既有隧道的影响,并结合现场实测数据对分析结果进行了验证。首先,采用理论方法分析钢套管旋转下压过程中土塞柱的受力情况,建立微分方程计算土塞柱底端的应力、土塞柱受到的剪切扭矩和自身抗剪扭矩,进而分析得到了土塞柱发生剪切破坏和土塞效应的临界深度。在此基础上按是否产生闭塞效应,分两种情况研究了钢套管旋压过程中产生的土体膨胀率。然后,利用既得的土体膨胀率,通过理论分析和数值模拟方法分析了群桩不同的施工顺序对既有多条盾构隧道的影响,得出了相对较优的群桩施工顺序方案。工程现场实测数据与数值模拟结果的对比分析表明,上述计算结果与实际情况能较好吻合。该研究对类似工程具有理论指导意义和实践参考价值。     

Nonlinear analysis of laterally loaded rigid piles in cohesive soil

This article presents a method for the nonlinear analysis of laterally loaded rigid piles in cohesive soil. The method considers the force and the moment equilibrium to derive the system equations for a rigid pile under a lateral eccentric load. The system equations are then solved using an iteration scheme to obtain the response of the pile. The method considers the nonlinear variation of the ultimate lateral soil resistance with depth and uses a new closed‐form expression proposed in this article to determine the lateral bearing factor. The method also considers the horizontal shear resistance at the pile base, and a bilinear relationship between the shear resistance and the displacement is used. For simplicity, the modulus of horizontal subgrade reaction is assumed to be constant with depth, which is applicable to piles in overconsolidated clay. The nonlinearity of the modulus of horizontal subgrade reaction with pile displacement at ground surface is also considered. The validity of the developed method is demonstrated by comparing its results with those of 3D finite element analysis. The applications of the developed method to analyze five field test piles also show good agreement between the predictions and the experimental results. The developed method offers an alternative approach for simple and effective analysis of laterally loaded rigid piles in cohesive soil. Copyright © 2011 John Wiley & Sons, Ltd.     

滑坡治理方法及其应用实例

对目前国内外滑坡治理方法进行总结综述，例举了滑坡治理的几个实例，指出了滑坡治理的优先考虑方法。     

抗滑桩间土拱力学特性与最大桩间距分析

抗滑桩最大桩间距确定的基础理论至今未建立起来，工程实践中仍依赖专家经验。本文从方桩桩间土拱形成的原理、力学特性论证入手，较全面地分析了桩间土拱的受力、变形，力的传递和土拱破坏瞬间的最大桩间距。并建立了最大桩间距平面计算模型。     

采用小径密抗桩一条龙抢治滑坡的方法及效果

以往整治滑坡,较多地使用大口径挖孔桩或钻孔灌注抗滑桩,周期长、成本高。川地208队在治理重庆制药五厂已处于危急态势的滑坡中,采用“天平式”控制、勘治结合、快速抢险,用三排小径密抗桩(300mm口径)整治,取得明显成效。实践表明:浅层滑坡采用较小口径的密抗桩,并辅以排水,能达到事半功倍的效果。     

PHC管桩荷载传递的试验研究和数值分析

通过在预应力高强混凝土管桩(PHC桩)的桩顶、桩端及桩周各主要土层的分界面埋设应变计的静荷载试验，研究了PHC管桩的荷载传递机理，分析了轴力和桩侧摩阻力的变化规律。并以工程中PHC管桩的竖向抗压静载试验为基础，运用有限单元法对软土地区的PHC管桩桩-土相互作用进行模拟，在分析中采用弹塑性模型，引入了非线性接触面单元，并且考虑了土体的材料非线性。分析结果表明，计算值和实测值有一定的差别，但是变化趋势基本一致。     

有载冻融作用对深部重塑黏土抗剪强度影响的试验研究北大核心CSCD

深厚表土层冻结法凿井工程中,深部土体由于经历了高压冻融作用,导致其工程性质变化,认识冻融作用对其强度与变形影响,对于冻融病害防治有一定意义。本文通过室内试验对深部重塑黏土进行了有载冻融,并对不同干密度、围压、冻结温度和融化温度条件下的深部冻融重塑黏土进行三轴剪切试验,探讨有载冻融作用下深土重塑土抗剪强度的变化规律。研究结果表明:冻融作用使深部重塑黏土的偏应力-应变关系由软化型转变成硬化型;同时,经冻融作用后其抗剪强度与割线模量都产生了一定的下降,在本试验条件下,抗剪强度最高下降了48.8%,割线模量E_()最大下降了72.0%。通过对各影响因素的显著性分析,发现初始干密度对抗剪强度和割线模量影响最为显著,围压对两者的影响最弱。     

深层搅拌桩复合地基的有限元分析

介绍了用自行编制的适用于群桩地基基础应力、变形分析的三维非线性程序对一种有代表性的群桩进行分析的情况。讨论了深层搅拌桩复合地基的工作机制和应力、变形分布特点，并通过多种方案的比较就不同的荷载水平、桩长、桩上置换率、土层分布、桩身变形模量等诸因素对地基沉降、桩端应力、桩的承载率的影响和规律进行了研究。     

Accuracy and reliability-based region-specific recalibration of dynamic pile formulas

Many state departments of transportation and consulting firms continue to use dynamic formulas because they are simple and inexpensive as compared to the preferred dynamic loading test with signal matching. Efforts to reduce the error and uncertainty associated with dynamic formulas are therefore warranted until dynamic monitoring becomes standard for every driven pile. However, dynamic formulas calibrated to national test pile databases have indicated inaccuracy and high uncertainty in the capacity prediction using dynamic formulas. A region-specific dynamic load test database was used to assess the accuracy and uncertainty in the Janbu, Danish and FHWA Gates formulas, recalibrate the equations for local conditions (construction practice, geology) and to generate resistance factors for use with Load and Resistance Factor Design (LRFD). Following recalibration, the capacity predictions became more accurate, and an observed dependence of the accuracy on the magnitude of resistance was eliminated for most driving conditions (e.g. end-of-driving, restrike). Previously reported static load test data were used to incorporate the transformation error associated with using the dynamic capacity to predict an equivalent static capacity. Resistance factors for use in Load and Resistance Factor Design (LRFD) were developed in consideration of American Association of State Highway and Transportation Officials–recommended load statistics and target reliability indices. Efficiency factors were used to assess the economic performance of each dynamic formula. Comparison of the accuracy and uncertainty of the recalibrated equations to a nationwide calibration illustrated the advantage of using a geologic-specific database for the calibration of resistance factors.     

移动荷载作用下土岩组合基坑吊脚桩变形分析

以青岛地区特有的土岩组合地质条件为背景,采用现场监测和Plaxis有限元模拟相结合的方法,研究了土岩基坑中吊脚桩在龙门吊移动荷载作用下的变形规律及动力响应。结果表明：桩身变形模拟结果与实测值吻合较好,基坑的变形主要发生在基坑上部软弱土层,吊脚桩嵌岩处产生应力集中;在龙门吊移动荷载作用下,桩顶水平位移较大,但其动力响应最小,而嵌岩处水平位移较小,但其动力响应最大;嵌岩处、桩身最大正弯矩处及最大负弯矩处的土压力动力响应较大,且移动荷载刚经过时刻影响最大。研究成果可为类似土岩结合地区深基坑支护设计提供参考。