融合多源数据的三维建模方法及精度分析

以地面相机影像、低空无人机影像和地面三维激光点云数据为融合对象,研究空地影像融合、低空影像融合地面三维激光点云和低空影像融合三维白模进行三维建模的方法,并对其三维建模精度和建模效果进行综合分析。这3种融合方法进行三维建模丰富了三维模型的色彩纹理信息,提高了三维模型的几何结构精度,能满足较大场景的三维实景模型的建模要求,为数字化古建筑(古文物)保护提供具有较高价值的参考数据。     

激光跟踪仪在核电站主管道安装中的应用

目前,核电站的主管道焊接越来越多的采用了自动焊技术,这有利于提高焊接质量效率,还可以压缩建设成本。然而,主管道自动焊对焊缝的限差较现有工艺要求更高,高精度的测量是实现主管道自动焊的必要条件之一。本文针对主管道自动焊管口组队高精度的技术要求,提出采用激光跟踪仪对主管道自动焊相关的设备进行更为精密的三维工业测量,通过理论技术评定测量精度,然后选择测量仪器和编制具体的测量方案,最终保证了主管道自动焊精确组对的实现。     

基于圆柱多段拟合的隧道中轴线提取方法研究

提出基于圆柱多段拟合的隧道中轴线提取方法。首先对隧道点云数据进行预处理,并将点云按隧道走向分成不同区段;然后对各区段依据轴线与表面点云法线垂直关系,提取精度较低的中轴线;最后对各区段利用圆柱多段拟合,提取精度较高的中轴线。实验表明,隧道中轴线的提取在一定的采样区间具有较高的稳定性,对直线和弯曲的圆形隧道有良好的适用性,算法可靠,精度较高。     

1.5 μm波长n-p-n型InGaAsP-InP晶体管激光器材料外延生长

基于器件模拟仿真,设计了一种1.5 μm波长InGaAsP-InP晶体管激光器材料外延结构. 其多量子阱有源区置于基区非对称波导中. 仿真结果显示该外延结构能够获得较好的光场限制和侧向电流限制. 对该材料MOCVD生长研究表明,基极重掺杂接触层中Zn²⁺扩散将导致量子阱严重退化. 通过对其扩散过程的模拟仿真,采用平均掺杂浓度为1×10¹⁸ cm^-3的梯度掺杂,有效地抑制了Zn²⁺向量子阱区的扩散. 所获得的外延材料在     

低扩散系数对Pd77 Cu6 Si17合金易非晶化的影响

采用激光熔凝技术,研究了Pd₇₇Cu₆Si₁₇合金快速凝固组织的演变规律.研究表明:随着生长速度的增大,Pd₇₇Cu₆Si₁₇合金晶体生长组织形貌发生了Pd₃Si枝晶+共晶-ξ枝晶+共晶-共晶团簇-规则共晶-非晶的转变;共晶失稳即非晶形成的临界生长速度为6 mm/s,最小层片间距为35 nm.通过与Al-25 wt%Sm,Al-32.7 w     

Nd:YAG纳秒激光诱导硅表面微结构的演化

利用Nd:YAG纳秒激光(波长为532和355 nm)对单晶硅在真空中进行了累积脉冲辐照,研究了表面微结构的演化情况.在激光辐照的初始阶段,532和355 nm激光脉冲均在硅表面诱导出了波纹结构,后者辐照硅表面后形成了近似同心但稍显混乱的环形波纹结构.随着脉冲数的增加,波纹结构逐渐演化为一种类似珠形的凹凸结构,最后形成准规则排列的微米量级锥形结构,该微结构的生长依赖于表面张力波和结构自组织.分析发现,形成的交叉环形结构主要是在355 nm激光辐照硅的过程中,表面张力波导致波纹结构部分叠加的结果.     

Extension of high-order harmonics and generation of an isolated attosecond pulse in the chirped laser field

This paper theoretically investigates the high-order harmonic generation cutoff extension using intense few-cycle linearly chirped laser pulses. It shows that the cutoff of the harmonic can be extended remarkably by optimising the chirping parameters. The time-frequency characteristics of high-order harmonics with different chirping parameters are analysed by means of wavelet transform of the dipole acceleration. It also gives out the classical three-step model pictures of electron. By superposing a properly selected range of the harmonic spectrum, it obtains an isolated 65as pulse.     

Active manipulation of the selective alignment by two laser pulses

This paper solves numerically the full time-dependent Schrõdinger equation based on the rigid rotor model, and proposes a novel strategy to determine the optimal time delay of the two laser pulses to manipulate the molecular selective alignment. The results illustrate that the molecular alignment generated by the first pulse can be suppressed or enhanced selectively, the relative populations of even and odd rotational states in the final rotational wave packet can be manipulated selectively by precisely inserting the peak of the second laser pulse at the time when the slope for the alignment parameter by the first laser locates a local maximum for the even rotational states and a local minimum for the odds, and vice versa. The selective alignment can be further optimised by selecting the intensity ratio of the two laser pulses on the condition that the total laser intensity and pulse duration are kept constant.     

Brillouin scattering study on elastic and piezoelectric properties of laser irradiated ZnO single crystals

Brillouin light scattering technique can be successfully used to determine the whole set of elastic and piezoelectric constants of a ZnO single crystal irradiated by different laser energy densities, into a micron range (radiation layer thickness). It is found that the scattering intensity, the linewidth and the Brillouin scattering shift of acoustic phonons are all strongly dependent on laser energy density. Based on the sound propagation equations and these results, the directional dependences of the compressional and shear moduli of the irradiated ZnO sample in the (001) plane are investigated. It is found that under an appropriate laser condition, 248 nm KrF excimer laser irradiation can significantly improve the surface quality and increase the elastic properties of ZnO single crystal. This procedure has potential applications in the fabrication of ZnO-based surface acoustic wave and optic-electronic devices.     

Control of high-order harmonic generation with two-colour laser field

We numerically investigate the high-order harmonic generation with two-colour optical field, taking into consideration the propagation effects. Some harmonics can be dramatically enhanced at a certain delay between the fundamental pulse and its second harmonics. Choice of the enhanced harmonics can be realised by changing the time delay between the two laser pulses.