内蒙古金厂沟梁金矿床成矿流体特征及稳定同位素研究

对金厂沟梁金矿床含金石英脉中流体包裹体进行了岩相学、显微测温、单个包裹体的激光拉曼测试以及O和S同位素组成等方面研究。结果表明,成矿流体气相成分主要为H2 O,属H2 O-NaCl体系,包裹体均一温度为148.7℃～352℃,盐度[ w （ NaCl ）/％]为1.05％～5.99％。δ18 O值为-1.1‰～3.0‰,说明成矿流体继承了变质流体的特征,仍以岩浆水和后期大气降水为主;δ34 SV-CDT组成为0.6‰～4.3‰,平均值0.817‰,极差为3.1‰,表明成矿流体中的硫主要来自于幔源,其次为围岩。综合分析认为,金厂沟梁金矿床是在燕山晚期太平洋板块俯冲导致岩石圈的快速减薄、拆沉的拉张环境下形成的浅成造山型金矿。     

机载激光测深技术

首先基于海水的光学特性介绍了机载激光测深原理,然后根据国内外的研究现状介绍了机载激光测深系统的性能指标和系统构成,最后介绍了在海底地形测量、障碍物探测、近岸海洋工程建设等方面的应用。为从事机载激光测深系统研发和应用的技术人员提供相关原理和背景参考。     

机载激光测深系统研制中的关键技术

根据机载激光测深系统的工作机理,分析梳理了研制过程中涉及的主要关键技术,包括:高重复频率激光器研制、大动态范围微弱光信号提取、海底回波识别、海面波浪改正、浅水与深水分离测量、高速多通道数字采集、海陆分界识别、定位测姿、水位改正和测深数据质量控制等技术。只有成功突破上述关键技术,才能实现《海道测量规范》要求的测深精度指标。     

Cycle graph analysis for 3D roof structure modelling: Concepts and performance

The paper presents a cycle graph analysis approach to the automatic reconstruction of 3D roof models from airborne laser scanner data. The nature of convergences of topological relations of plane adjacencies, allowing for the reconstruction of roof corner geometries with preserved topology, can be derived from cycles in roof topology graphs. The topology between roof adjacencies is defined in terms of ridge-lines and step-edges. In the proposed method, the input point cloud is first segmented and roof topology is derived while extracting roof planes from identified non-terrain segments. Orientation and placement regularities are applied on weakly defined edges using a piecewise regularization approach prior to the reconstruction, which assists in preserving symmetries in building geometry. Roof corners are geometrically modelled using the shortest closed cycles and the outermost cycle derived from roof topology graph in which external target graphs are no longer required. Based on test results, we show that the proposed approach can handle complexities with nearly 90% of the detected roof faces reconstructed correctly. The approach allows complex height jumps and various types of building roofs to be firmly reconstructed without prior knowledge of primitive building types.     

2010年6月中国南方持续性强降水过程：天气系统演变和青藏高原热力作用的影响

2010年6月中国南方发生持续性强降水,其强度与2008年6月相当,超过近年来其他年份。但是,与2008年6月相比,2010年6月对流层中低层低值系统活动在青藏高原至长江中下游地区异常频繁,副热带高压(副高)位置异常偏西、强度偏强,导致低层异常风场辐合区及强降水区域相对偏北。分析2010年6月14—24日中国南方连续出现的4次持续性强降水过程,发现南亚高压、对流层中层的中纬度槽脊和西太平洋副高以及低层切变线和东移低涡是造成持续性强降水的主要天气系统。利用WRF模式对2010年6月强降水过程实施显式对流集合模拟试验,在控制试验重现观测到的地面降水和天气系统特征的基础上,在敏感性试验中将青藏高原的地表短波反照率修改为1.0,对比两组模拟试验的结果表明:控制试验中青藏高原的地表感热加热作用使得高原及其周边地区的大气温度发生变化,相应的热成风平衡调整使得对流层低层至高层大气环流和天气系统特征发生显著变化,增强了中国南方的持续性降水。200 hPa青藏高原西部形成反气旋性环流异常,东部形成气旋性环流异常,青藏高原东部南下的冷空气加强,中国南方辐散增强;500 hPa青藏高原北部的脊加强,中国东部的槽加深,副高西北侧的西南风明显增强,从青藏高原向下游传播的正涡度也显著加强;850 hPa的低涡强烈发展并逐步东移,华南沿海的西南低空急流更为强盛,导致降水区的水汽辐合、上升运动及降水强度都增强。     

基于机载 Lidar 的地貌数据快速更新方案研究

空间地理信息作为国家信息资源的重要组成部分之一,承担着越来越重要的作用,地貌数据作为空间数据的组成部分,其数据采集及更新十分重要。机载 Lidar 问世以来受到测绘行业广泛重视,其应用不断扩展。该文以地貌数据的快速更新为研究目的,深入分析了地貌更新流程以及机载 Lidar 数据成果,并在此之上提出基于机载 Lidar 数据的地貌快速更新方案,研究其具体步骤以及核心技术,同时采用 CAD 二次开发实现地貌更新数据预处理,大幅提高地貌更新效率。     

Precise and Accurate In Situ Determination of Lead Isotope Ratios in NIST,USGS, MPI‐DING and CGSG Glass Reference Materials using Femtosecond Laser Ablation MC‐ICP‐MS

Lead isotope ratio data were obtained with good precision and accuracy using a 266 nm femtosecond laser ablation (fLA) system connected to a multi‐collector ICP‐MS (MC‐ICP‐MS) and through careful control of analytical procedures. The mass fractionation coefficient induced by 266 nm femtosecond laser ablation was approximately 28% lower than that by 193 nm excimer laser ablation (eLA) with helium carrier gas. The exponential law correction method for Tl normalisation with optimum adjusted Tl ratio was utilised to obtain Pb isotopic data with good precision and accuracy. The Pb isotopic ratios of the glass reference materials NIST SRM 610, 612, 614; USGS BHVO‐2G, BCR‐2G, GSD‐1G, BIR‐1G; and MPI‐DING GOR132‐G, KL2‐G, T1‐G, StHs60/80‐G, ATHO‐G and ML3B‐G were determined using fLA‐MC‐ICP‐MS. The measured Pb isotopic ratios were in good agreement with the reference or published values within 2s measurement uncertainties. We also present the first high‐precision Pb isotopic data for GSE‐1G, GSC‐1G, GSA‐1G and CGSG‐1, CGSG‐2, CGSG‐4 and CGSG‐5 glass reference materials obtained using the femtosecond laser ablation MC‐ICP‐MS analysis technique.     

Measurements of net all-wave radiation at a tropical location,Ile-Ife,Nigeria

Hourly averaged net all-wave radiation data spanning a complete three-year period (2010-2012) at a meteorological station located inside the Obafemi Awolowo University campus in Ile-Ife (7.52° N, 4.52° E), Nigeria is presented in this study to investigate its diurnal and seasonal variations. Using a high-sensitivity four-component net radiometer, the data represents so far the most consistent and detailed information available for a tropical location in West Africa. From the dataset, hourly maxima of the net radiation occurred at 14:00 LT (GMT + 1), whose values increased considerably from 337.6 ± 146.4 Wm⁻² in July, which is the peak of the wet season, to 441.7 ± 82.4 Wm⁻² in March, the end of the dry season. April and October, both of which mark the beginning and end of the raining season at Ile-Ife have recorded the highest values of 584.7 and 612.2 Wm⁻², respectively. There was strong intra/inter-seasonal variation observed in the monthly mean values of the net radiation due mainly to the fluctuations in cloudiness and humidity. In the study area, the data indicated a net radiative heating taking place at the surface, whose annual trend follows a bimodal distribution. The present data supports the results published in earlier studies by other authors.     

三维激光扫描仪在复杂环境中的应用

随着扫描仪性能的不断提升和对环境适应性的增强,在许多常规测量无法完成的情况下,借助其非接触、远距离测量的特点,可以在特殊环境下完成许多常规测量无法完成的任务。     

地面三维激光扫描点云数据精度影响因素及控制措施

地面三维激光扫描技术虽然具有分辨率高、准确度高、效率高等特点,但在应用过程中存在一系列影响三维激光扫描精度的因素。文中详细分析扫描距离、物体表面材质、控制网、标靶测量精度、光斑大小、扫描点间距、点云拼接精度、全反射物质和外界环境等因素对三维激光扫描精度的影响,并提出对以上影响因素的控制方法。