Geology of the Pedwardine district,Herefordshire and Powys

The stratigraphy of the Pedwardine inlier of Precambrian (Longmyndian), Tremadoc, and what are now shown to be upper Llandovery rocks is described. The inlier is surrounded by Silurian rocks, including upper Llandovery (two very small areas), Wenlock, Ludlow and Přídolí (Red Downton Formation). The Ludlow rocks provide a distal record of the mass movement recorded more fully in the Wigmore Rolls area to the east. The Pedwardine area lies along the Church Stretton Fault Zone. Though ill-exposed, it shows evidence of the history of faulting, including thrusting. © 1997 John Wiley & Sons, Ltd.     

Badland Morphology and Evolution: Interpretation Using a Simulation Model

A drainage basin simulation model is used to interpret the morphometry and historical evolution of Mancos Shale badlands in Utah. High relief slopes in these badlands feature narrow divides and linear profiles due to threshold mass-wasting. Threshold slopes become longer in proportion to erosion rate, implying lower drainage density and higher relief. By contrast, in slowly eroding areas of low relief, both model results and observations indicate that drainage density increases with relief, suggesting control by critical shear stress. Field relationships and simulation modelling indicate that the badlands have resulted from rapid downcutting of the master drainage below an Early Wisconsin terrace to the present river level, followed by base level stability. As a result, Early Wisconsin alluvial surfaces on the shale have been dissected up to 62 m into steep badlands, and a Holocene alluvial surface is gradually replacing the badland slopes which are erocing by parallel retreat. © 1997 by John Wiley & Sons, Ltd.     

Coupled consolidation of a porous medium with a cylindrical or a spherical cavity

This paper presents a theoretical approach to analyse coupled, linear thermoporoelastic fields in a saturated porous medium under radial and spherical symmetry. The governing equations account for compressibility and thermal expansion of constituents, heat sink due to thermal dilatation of water and thermal expansion of the medium, and thermodynamically coupled heat–water flow. It has been reported in the literature that thermodynamically coupled heat–water flows known as thermo-osmosis and thermal filtration have the potential to significantly alter the flow fields in clay-rich barriers in the near field of a underground waste containment scheme. This study presents a mathematical model and examines the effects of thermo-osmosis and thermal-filtration on coupled consolidation fields in a porous medium with a cavity. Analytical solutions of the governing equations are presented in the Laplace transform space. A numerical inversion scheme is used to obtain the time-domain solutions for a cylindrical cavity in a homogeneous or a non-homogeneous medium. A closed form time-domain solution is presented for a spherical cavity in a homogeneous medium. Selected numerical solutions for homogeneous and non-homogeneous media show a significant increase in pore pressure and displacements due to the presence of thermodynamically coupled flows and a negligible influence on temperature. © 1998 John Wiley & Sons, Ltd.     

四川米易海塔地区混合岩型铀矿流体包裹体特征

混合岩型铀矿是康滇地轴上最有希望取得找矿突破的铀矿类型,海塔地区的铀矿化即是该类型铀矿的典型代表。本文针对区内的长英质脉矿石、富晶质铀矿石英脉矿石和含矿热液石英脉中的石英流体包裹体进行了研究。结果表明,海塔地区混合岩型铀矿的成矿作用可分为2个阶段:早期混合岩化热液成矿阶段为高温、中低盐度流体,流体包裹体均一温度集中在380~540℃,盐度变化范围为16.15%~23.18%NaCl eqv,是区内铀成矿的主要阶段;晚期热液叠加改造成矿阶段为中低温、低盐度流体,流体包裹体均一温度集中在140~220℃,盐度变化范围为5.56%~23.18%NaCleqv,是区内富铀矿的形成阶段。流体包裹体的气相成分测试表明,长英质脉矿石石英包裹体中以CH4、CO2为主,其次为H2O和N2;而富晶质铀矿石英脉及含矿热液石英脉石英包裹体中以H2为主,部分含有CO2、CH4、H2O。氢、氧同位素研究表明,早期混合岩化成矿阶段的成矿流体可能为岩浆水与变质水的混合,而晚期热液叠加改造成矿阶段成矿流体中可能有大气降水的加入。     

湖南鲁塘煤系石墨矿区构造格局及控矿机制

湖南鲁塘矿区为我国著名的煤系石墨矿区,煤系石墨的形成受岩浆热作用和构造作用的双重控制,其成矿和赋存都与构造格局密切相关。为深入研究构造作用对煤系石墨成矿的影响,通过野外地质调查和光学显微镜下观察、X射线衍射和拉曼光谱等测试分析方法,分析研究区构造特征和煤系石墨特征。研究结果表明,受区域构造活动的影响,鲁塘矿区构造格局呈现出分区分带性特征,东西方向可划分为东部、中部和西部3个条带;南北方向可划分为北部、中部和南部3个分区。自西向东,随着与岩体距离逐渐减小,煤层受岩浆热作用的影响逐渐增大,煤的石墨化程度也逐渐增高。由南向北,构造变形强度逐渐增强,导致北部分区形成以封闭式高温-高压的成矿环境为主,同时,应力作用促进了煤的石墨化,导致煤的石墨化程度较高;中部分区内构造情况复杂,形成不同温度压力条件的成矿环境,煤的石墨化程度差异性明显;南部分区构造情况简单,主要构成开放式环境,煤的石墨化程度较低,仅在近岩体附近可形成煤系半石墨。研究成果为煤系石墨资源勘探提供了有力依据。      

非传统稳定同位素分析技术要点

高精度高质量的同位素分析技术是开展非传统稳定同位素地球化学工作的前提。同位素分析是不断提取样品真实信息的过程,包括样品制备、化学分离、质谱测定和数据处理4个基本步骤。在同位素分析过程中,每一环节都有可能引入空白或者污染,或造成同位素分馏,引发信息“失真”。为了准确获得样品的真实同位素组成,必须有效避免污染并精准校正在分析过程中可能的干扰。以Ca同位素为例,在总结前人工作的基础上,探讨了各个步骤所涉及的分析要点,为建立其他同位素体系的分析方法提供参考,为后续储库探讨、机理解析及应用研究提供技术支撑。     

基于最大球算法定量表征土体空间孔隙网络

孔隙网络控制着土体渗流、排水固结与基质吸力等重要工程性质。本文介绍了多孔介质孔隙网络最大球建模基本原理与算法。以显微CT扫描振捣干法生成的南京粉砂试样为例,采用最大球算法建立了试样三维重构模型表征单元体(REV)的空间孔隙网络球棍模型,计算得到了样品REV尺度的孔隙网络参数,统计发现,孔隙半径、喉道半径、孔隙配位数、孔隙截面形状因子、喉道截面形状因子与喉道长度等孔隙参数均近似服从正态分布,孔隙体积近似服从衰减型指数分布。孔隙与喉道半径分别分布在100μm与65μm以内,两者数学期望分别为40. 0μm与18. 0μm;配位数分布在25以内,数学期望为5. 1;孔隙与喉道截面形状因子分别分布在0. 01~0. 04与0. 01~0. 05的区间内,两者数学期望分别为0. 019与0. 033;喉道长度分布在100~800μm以内,数学期望为292. 22μm。同时发现,样品中体积小于1. 5×10^7μm^3的小孔隙数量超过90%。本方法可应用于土体细观孔隙结构的定量表征。     

基于混合聚类的岩体结构面优势分组方法

提出一种基于凝聚层次法和模糊C均值法的混合聚类法,用于对岩体结构面的优势组划分。该方法将结构面投放到在单位球面上,并使用欧式距离作为极点的相似性度量准则。先剔除结构面数据中的孤值产状,然后用凝聚层次法得到初步聚类结果,并将其作为FCM法的初始聚类中心,最后用FCM法划分优势组。通对人工生成产状样本的分组,验证了该法的正确性。将该方法应用于大藤峡坝址区实测的结构面数据的划分。在实测数据中寻找到两个孤值产状,成功将大藤峡D1y^1-3地层岩体结构面划分为两组,得到了符合实际的分组结果。     

三峡库区龙门寨危岩体崩塌产生涌浪研究

长江两岸高耸的危岩体对航道、沿岸居民带来巨大安全隐患。大宁河属于长江一级支流,龙门寨危岩体位于大宁河上,距离巫山县城仅1 km。利用FLOW-3D软件,模拟了145 m、175 m两种水位工况下龙门寨危岩体崩塌产生涌浪过程和涌浪传播过程。模拟结果表明,涌浪在145 m水位工况下最大浪高约为17.9 m,175 m水位工况下最大浪高约为11.6 m;在巫山县的五个码头处,两种水位工况最大涌浪爬高分别约为10.9 m、3.8 m;根据涌浪高度,对大宁河进行危险分区,145 m水位工况下极高危险区长度约4.4 km,很高危险区长度约1.9 km;175 m水位工况下极高危险区长度约3.0 km,很高危险区长度约1.0 km。研究结果有助于防控龙门寨危岩体潜在涌浪灾害危害,保障大宁河航道和巫山县码头安全,同时也为三峡库区滑坡涌浪灾害提供了预警依据。