金丽温高速公路K81高边坡变形动态数值分析

对金丽温高速公路K81高边坡进行接触大变形有限元动态数值分析.结果表明,路堑边坡开挖,导致滑面的法向应力减小、抗滑力下降,是引起古滑坡复活的根本原因.研究结果也说明了接触大变形有限元分析方法可以较好地分析潜在滑面的力学作用,是研究滑坡的滑动机理的有效方法.     

碎屑流沿坡面运动的初步分析

本文分析了碎屑流沿坡面下滑过程中的运动特性,重点考察了床面摩擦系数、土体内摩擦角和坡角对碎屑流堆积形态的影响.     

Aeolian abrasion and modes of fine particle production from natural red dune sands: an experimental study

A series of experiments was conducted to determine the potential for aeolian abrasion of natural dune sands to produce fine particles (< 125 µm) by (1) the release of resident fines; (2) spalling, chipping and breakage of particles; and (3) the removal of grain surface coatings. Parent samples were obtained from the surfaces of four active continental dunes and abraded using a glass ‘test tube’ chamber for up to 120 h. The fine particles produced by this abrasion process were trapped at varying time intervals and subject to detailed particle‐size analyses using a Coulter Multisizer. The abrasion of untreated parent samples produced fine particles in one of two main size classes, < 10 µm and > 50 µm, but when the parent sample was sieved to exclude particles < 250 µm, relatively more material in the range 10–50 µm was produced. For unsieved parent samples, the size range associated with the dominant mode varied according to the length of the abrasion time. The coarsest mode (> 63 µm) was dominant during the first 16 h of abrasion, then became less significant and is thought to be associated with the release of resident fines into suspension. The finest mode (< 10 µm) was absent or very weak during the first 16 h of abrasion, then became more significant and, in some instances, dominated the distribution as abrasion continued. Removal of grain surface coatings is the main source of fine material < 10 µm, and this may be a significant source of fine material in areas where sands are dominated by subrounded and rounded particles. By comparison with previous studies of aeolian particle abrasion, these natural dune sands produced very low quantities of fine material (by weight), but their spatial extent makes them potentially a significant source of dust‐sized particles at the global scale.     

Origin of layering in cumulate gabbros in the Oman ophiolite: Insights from magnetic susceptibility measurements in the Wadi Sadm area

Abstract   Magnetic susceptibility and the anisotropy of magnetic susceptibility were measured on an 800-cm-thick succession of cumulate gabbro in the Sadm area of the Oman ophiolite. The section contained three distinct cumulate units. The susceptibility tends to decrease upward in each from a melanocratic layer (several tens of centimeters thick) to a leucocratic layer (a few meters thick). The susceptibility decreases in accordance with the decreasing number of magnetite grains, which are the alteration product mainly of olivine minerals. This suggests the cyclic downward accumulation of olivine in the cumulate gabbro. The apparent strain deduced from the patterns of magnetic and grain fabrics was the result mostly of simple shear, so that the layering of gabbro is understood to be formed primarily by a crystal cumulus process followed by simple shear deformation.     

森林沼泽景观区中大比例尺化探找矿工作方法的研究--记大梁金矿的发现

大梁金矿是通过森林沼泽景观区开展1：50000和1：25000地球化学测量及综合地质工作而发现的,证明采用的森林沼泽景观中大比例尺化探方法是行之有效的.     

The migration of fluid-filled grain boundaries in recrystallizing synthetic bischofite: first results of in-situ high-pressure, high-temperature deformation experiments in transmitted light

The effect of fluids on recrystallization behaviour is well known; however, the detailed microscale distribution of fluid in grain boundaries and the influence of fluid on grain boundary migration are still unresolved. In this study, in‐situ deformation experiments in transmitted light microscopy were undertaken, as this allows continuous and direct observation of the whole range of processes involved in fluid‐assisted grain boundary migration. A new see‐through deformation apparatus was developed to enable the control of fluid pressure. Bischofite containing small amounts of aqueous fluid was deformed at temperatures between 50 and 90 °C, over a range of fluid pressure from 0.5 to 1 MPa, and strain rates of 5 × 10^?6 to 1 × 10^?4 s^?1. The rates of grain boundary migration were measured at different temperatures and strain rates. Detailed observations during and after the deformation illustrate the evolution of migrating fluid‐filled grain boundaries and show that the incorporation of fluids from inclusions as well as their pinch‐off is dependent on the grain boundary velocity, the thickness of the grain boundary and the size and shape of the inclusions. Direct evidence is presented for the contraction of the grain boundary fluids into isolated inclusions after equilibrium conditions are attained.     

Characterization of hydrogeologic properties for a multi-layered alluvial aquifer using hydraulic and tracer tests and electrical resistivity survey

A multi-layered aquifer, typical of riverbank alluvial deposits in Korea, was studied to determine the hydrologic properties. The geologic logging showed that the subsurface of the study site was comprised of four distinctive hydrogeologic units: silt, sand, highly weathered and fresh bedrock layers. The electrical resistivity survey supplied information on lateral extension of hydrogeologic strata only partially identified by a limited number of the geologic loggings. The laboratory column tracer test for the recovered core of the sand layer resulted in a hydraulic conductivity of 5.00×10⁻² cm/s. The slug tests performed in the weathered rock layer yielded hydraulic conductivities of 4.32–7.72×10⁻⁴ cm/s. Hydraulic conductivities for the sand layer calculated from the breakthrough curves of bromide ranged between 2.08×10⁻³ and 2.44×10⁻² cm/s with a geometric mean of 6.89×10⁻³ cm/s, which is 7 times smaller than that from the laboratory column experiment. The trend of increasing hydraulic conductivity with an increase in tracer travel length is likely a result of the increased likelihood of encountering a high conductivity zone as more of the aquifer is tested. The combined hydrogeologic site characterization using hydraulic tests, tracer tests, and column test with geologic loggings and geophysical survey greatly enhanced the understanding of the hydrologic properties of the multi-layered alluvial aquifer.     

长江漫滩区深大异形基坑施工对紧邻特大型桥梁影响及变形控制研究

随着地下空间资源的开发利用,越来越多深基坑呈现出开挖深、规模大、形状不规则等特点,其支护结构设计复杂,施工难度大,具有明显的空间效应。本文以南京地铁某基坑工程为例,分析基坑施工对邻近桥梁的影响。其场区位于长江下游漫滩相二元结构地层分布地段,上部软土层厚度大,下部承压含水层地下水位高、水量丰富,地质条件复杂,该基坑为典型的深大异形基坑,距离某大桥的双曲拱引桥仅为7. 2 m,由于之前桥梁已遭受其他地下工程施工产生的较大变形,所以后续工程对其影响变形控制要求极高。为此,该车站基坑支护结构设计基于地下空间实际功能采用设置分隔墙分区开挖及MJS超深工法墙综合变形控制方案。本文通过有限元数值模拟计算,开展复杂环境下基坑开挖引起的围护结构及桥梁桩基的变形预测分析,计算结果显示,该深大狭长异形基坑开挖对邻近桥梁沉降变形影响显著,通过设置分隔墙分区开挖及MJS工法墙进行变形控制,能够较好地控制基坑的空间效应,减少“长边效应”、“异形效应”等对桥梁沉降变形的影响。通过现场基坑开挖过程实际监测结果,验证这一综合变形控制方案的可行性。该研究成果对于类似复杂地质条件下深大狭长异形基坑的支护及施工设计具有很好的借鉴意义。     

泥沙颗粒形状对非均匀沙起动条件的影响

根据非均匀沙颗粒的不均匀性,引入颗粒形状系数,通过分析泥沙颗粒形状系数和相对暴露度的影响,建立了等效粒径表达式;并通过泥沙起动受力分析,推导得到泥沙起动临界条件表达式.实测资料验证表明,计算值与实测值符合较好.