温州世贸中心大厦超深大直径钻孔灌注桩施工技术

介绍了超深大直径钻孔灌注桩在温州世贸中心大厦桩基工程中的应用情况，对其施工中出现的主要问题进行了分析和处理，并提出了解决措施。     

Slow mass movement in the Kangchenjunga area, eastern Nepal Himalaya

Abstract   The rates of the accumulated and continuous displacement of solifluction lobes in the Kangchenjunga area, eastern Nepal Himalaya, were determined using glass fiber tubes and a strain probe. Ground temperature, precipitation and soil moisture were monitored at two sites, whose altitude differed by approximately 100 m, to understand the solifluction process. The average movement rate of the glass fiber tubes on a 31° slope at altitudes of 5412–5414 m a.s.l. was approximately 11 mm/year, being almost threefold greater than that observed on a 22° slope at 5322–5325 ma.s.l. There was no significant difference in the depth of displacement at these sites. The continuous displacement measurement near the ground surface at 5414 m showed permanent downslope movement from early July. Such movement may be attributed to additional moisture supply during the monsoon season. The amplitude of the displacement cycle was highest at the ground surface, and decreased to virtually zero at and below 20 cm in depth. Probable factors leading to the relatively slow rates of downslope displacement at the surface and depth at the studied altitudes are the lack of concurrence of the freeze–thaw cycles and the high moisture condition in the soil, and the low moisture retention capacity of the soil because of steep slopes and superficial desiccation. The rate of displacement may be more pronounced at altitudes above 5600 m because of the freeze–thaw cycles during the summer season.     

Dynamic theory of rigid-plasticity

This paper deals with an analysis method for the response and motion of soil-like rigid-plastic bodies under seismic loading conditions. A continuity condition to determine the acceleration distribution within the rigid-plastic body when the failure occurs during seismic motions is proposed. Combining this continuity condition of acceleration and the ‘Generalized Limit Equilibrium Method (GLEM)’, the responses of the earth structure during seismic motions as well as the permanent displacements can be obtained, where GLEM is one of the limit equilibrium methods proposed by the authors for static problems and providing the approximate solution for Kötter's equation. The theoretical formulation of the method, the illustrative examples, and some comparisons between the analytical and experimental results are demonstrated.     

Wood storage in a wide mountain river: case study of the Czarny Dunajec,Polish Carpathians

Storage of large woody debris in the wide, mountain, Czarny Dunajec River, southern Poland, was investigated following two floods of June and July 2001 with a seven‐year frequency. Within a reach, to which wood was delivered only by bank erosion and transport from upstream, wood quantities were estimated for eighty‐nine, 100 m long, channel segments grouped into nine sections of similar morphology. Results from regression analysis indicated the quantity of stored wood to be directly related to the length of eroded, wooded banks and river width, and inversely related to unit stream power at the flood peak. The largest quantities of wood (up to 33 t ha^?1) were stored in wide, multi‐thread river sections. Here, the relatively low transporting ability of the river facilitated deposition of transported wood while a considerable length of eroded channel and island banks resulted in a large number of trees delivered from the local riparian forest. In these sections, a few morphological and ecological situations led to the accumulation of especially large quantities of wood within a small river area. Very low amounts of wood were stored in narrow, single‐thread sections of regulated or bedrock channel. High stream power facilitated transport of wood through these sections while the high strength of the banks and low channel sinuosity prevented bank retreat and delivery of trees to the channel. Considerable differences in the character of deposited wood existed between wide, multi‐thread channel sections located at different distances below a narrow, 7 km long, channellized reach of the river. Wood deposited close to the downstream end of the channellized reach was highly disintegrated and structured into jams, whereas further downstream well preserved shrubs and trees prevailed. This apparently reflects differences in the distance of wood transport and shows that in a mountain river wider than the height of trees growing on its banks, wood can be transported long distances along relatively narrow, single‐thread reaches but is preferentially deposited in wide, multi‐thread reaches. Copyright © 2005 John Wiley & Sons, Ltd.     

Real-time simulation of ground displacement by digital accelerograph record

Introduction The observation records of strong ground motion previously, on the one hand, supplied basicdata both to research on earthquake engineering and to constitute the criterion of aseismatic de-signing of all project structures; on the other hand, it provided important information for the re-search on the process of epicenter burst in seismology. With the development of research on strongground motion observation, especially the development of the new generation accelerograph,which…     

The impact of epistemic uncertainty on an earthquake loss model

Models capable of estimating losses in future earthquakes are of fundamental importance for emergency planners, for the insurance and reinsurance industries, and for code drafters. Constructing a loss model for a city, region or country involves compiling databases of earthquake activity, ground conditions, attenuation equations, building stock and infrastructure exposure, and vulnerability characteristics of the exposed inventory, all of which have large associated uncertainties. Many of these uncertainties can be classified as epistemic, implying—at least in theory—that they can be reduced by acquiring additional data or improved understanding of the physical processes. The effort and cost involved in refining the definition of each component of a loss model can be very large, for which reason it is useful to identify the relative impact on the calculated losses due to variations in these components. A mechanically sound displacement‐based approach to loss estimation is applied to a test case of buildings along the northern side of the Sea of Marmara in Turkey. Systematic variations of the parameters defining the demand (ground motion) and the capacity (vulnerability) are used to identify the relative impacts on the resulting losses, from which it is found that the influence of the epistemic uncertainty in the capacity is larger than that of the demand for a single earthquake scenario. Thus, the importance of earthquake loss models which allow the capacity parameters to be customized to the study area under consideration is highlighted. Copyright © 2005 John Wiley & Sons, Ltd.     

森林沼泽景观区中大比例尺化探找矿工作方法的研究--记大梁金矿的发现

大梁金矿是通过森林沼泽景观区开展1：50000和1：25000地球化学测量及综合地质工作而发现的,证明采用的森林沼泽景观中大比例尺化探方法是行之有效的.     

Numerical Modeling of Basin-Range Tectonics Related to Continent-Continent Collision

Continent-continent collision is the most important driving mechanism for the occurrence of various geological processes in the continental lithosphere. How to recognize and determine continent-continent collision,especially its four-dimensional temporal-spatial evolution, is a subject that geological communities have long been concerned about and studied. Continent-continent collision is mainly manifested by strong underthrnsting (subduction) of the underlying block along an intracontinental subduction zone and continuous obduction (thrusting propagation) of the overlying block along the intracontinental subduction zone, the occurrence of a basin-range tectonic framework in a direction perpendicular to the subduction zone and the flexure and disruption of the Moho. On the basis of numerical modeling, the authors discuss in detail the couplings between various amounts and rates of displacement caused by basin subsidence, mountain uplift and Moho updoming and downflexure during obduction (thrusting propagation) and subduction and the migration pattern of basin centers. They are probably indications or criteria for judgment or determination of continent-continent collision.