云南白马寨铜镍硫化物矿床铂族元素地球化学及其对矿床成因的制约

采用镍硫火试金ICP-MS法分析了白马寨铜镍硫化物矿床矿石及其主要围岩铂族元素(PGE)含量,结果表明铂族元素总量(ΣPGE)普遍较低,且ΣPGE由矿床核部的块状矿石(78.15×10-9~555.92×10-9)向外围矿化橄榄岩(6.77×10-9~70.95×10-9)至辉长岩(3.02×10-9)逐步降低。煌斑岩脉岩的ΣPGE也较低,为6.86×10-9~17.03×10-9。ΣPGE与Ni含量呈明显的正相关。不同种类岩石和矿石的PGE原始地幔配分模式明显不同,块状矿石为Pt-Pd配分型,Ir较明显亏损;矿化橄榄岩配分曲线较平坦,IPGE和PPGE分异不明显,但均出现Ru正异常。辉长岩样品和煌斑岩PGE配分模式几乎一致,也均出现明显的Ru正异常。矿石和围岩的Cu/Pd值远高于原始地幔,表明原生岩浆发生了较强的硫化物熔离作用。块状富镍矿石的(Pt+Pd)/(Os+Ir+Ru)和Pd/Ir分别为138.24和24.7,指示其母岩浆为演化较为彻底的玄武质岩浆,而矿化橄榄岩的相应值分别为3.02和16.09,具有科马提质岩浆的特征参数,因此白马寨块状矿石和矿化橄榄岩之间可能没有成因联系。块状硫化物熔体侵位前,其母岩浆经历过长时间强烈的硫化物熔离作用,硫化物熔浆作为独立的侵入相而侵入于III号岩体核部。这个过程反映了峨眉山地幔柱尾部岩浆演化和成矿可能经历过高度的S饱和过程。白马寨矿床形成过程中可能受到地壳物质的混染。     

大直径环式组合潜孔锤及钻进工艺研究

论述了大直径嵌岩桩孔钻进的现状、发展趋势,阐述了大直径环式组合潜孔锤的工作原理、结构设计、钻进工艺方法,对设计加工的HC-15型环式组合潜孔锤钻具进行了室内模拟试验,并对试验结果进行分析总结.     

优质膨润土泥浆在大直径深桩基工程中的应用

为解决在澳门美高梅金殿超濠博彩场及酒店项目桩基工程中大直径深护筒无法回收的难题,笔者在分析港澳地区灌注桩传统工艺缺陷的基础上,采用具有预处理能力的优质膨润土泥浆.施工实践表明,2#配方泥浆能有效的保持桩孔稳定性,桩孔的平均充盈系数为1.0794;改善了钻进泥浆的性能,使泥浆的重复利用率提高到45.33%,泥浆废弃率仅为2.38%;降低了工程成本,减小了对环境的影响.同时,为钻孔灌注桩施工总结了各个阶段泥浆性能标准.     

大深度载人潜水器低速大漂角模糊滑模航向控制研究

通过模型试验测量大深度载人潜水器低速大漂角运动时所受到的非线性水动力。基于一种新的模糊滑模控制策略,为潜水器设计了鲁棒航向控制器。在不同的漂角子区间内分别设计局部镇定的滑模控制器,然后通过Takagi-Sugeno模糊推理系统将它们光滑连接,得到模糊滑模控制。仿真计算结果充分显示了该控制策略的有效性。     

Using Mesoproterozoic sedimentary geochemistry to reconstruct basin tectonic geography and link organic carbon productivity to nutrient flux from a Northern Australian large igneous Province

The Beetaloo Sub-basin, northern Australia, is considered the main depocentre of the 1,000-km scale Mesoproterozoic Wilton package of the greater McArthur Basin – the host to one of the oldest hydrocarbon global resources. The ca. 1.40–1.31 Ga upper Roper Group and the latest Mesoproterozoic to early Neoproterozoic unnamed group of the Beetaloo Sub-basin, together, record ca. 500 million years of depositional history within the North Australia Craton. Whole-rock shale Sm–Nd and Pb isotope data from these sediments reveal sedimentary provenance and their evolution from ca. 1.35 to 0.85 Ga. Furthermore, these data, together with shale major/trace elements data from this study and pyrolysis data from previous publications, are used to develop a dynamic tectonic geography model that links the organic carbon production and burial to an enhanced weathering of nutrients from a large igneous province. The ca. 1.35–1.31 Ga Kyalla Formation of the upper Roper Group is composed of isotopically evolved sedimentary detritus that passes up, into more isotopically juvenile Pb values towards the top of the formation. The increase in juvenile compositions coincides with elevated total organic carbon (TOC) contents of these sediments. The coherently enriched juvenile compositions and TOC the upper portions of the Kyalla Formation are interpreted to reflect an increase in nutrient supply associated with the weathering of basaltic sources (e.g. phosphorous). Possible, relatively juvenile, basaltic sources include the Wankanki Supersuite in the western Musgraves and the Derim Derim–Galiwinku large igneous province (LIP). The transition into juvenile, basaltic sources directly before a supersequence-bounding unconformity is here interpreted to reflect uplift and erosion of the Derim Derim–Galiwinku LIP, rather than an influx of southern Musgrave sources. A new baddeleyite crystallisation age of 1,312.9 ± 0.7 Ma provides both a tight constraint on the age of this LIP, along with its associated magmatic uplift, as well as providing a minimum age constraint for Roper Group deposition. The unconformably overlying lower and upper Jamison sandstones are at least 300 million years younger than the Kyalla Formation and were sourced from the Musgrave Province. An up-section increase in isotopically juvenile compositions seen in these rocks is interpreted to document the progressive exhumation of the western Musgrave Province. The overlying Hayfield mudstone received detritus from both the Musgrave and Arunta regions, and its isotopic geochemistry reveals affinities with other early Neoproterozoic basins (e.g. Amadeus, Victoria and Officer basins), indicating the potential for inter-basin correlations.     

Correspondence between the large volcanic eruptions and ENSO events over AD 1525–2000

ENSO is an interannual mode which may be affected by external forcing, such as volcanic eruptions. Based on the reconstructed volcanic eruptions chronology and ENSO sequences, both 195 large volcanic eruptions(VEI≥4) and 398 ENSO(El Ni?o and La Ni?a) events were extracted from 1525 to 2000. An analysis of the correspondence between the large volcanic eruptions and ENSO events was performed by matching the large volcanic eruptions with the types and magnitudes of ENSO events present in the 0–2 years after the eruptions. The results show the following:(1) The percentages of ENSO events within the 3 years after the large eruptions had increased to 68.3% from 31.7% compared with those with no-eruptions in the previous 0–2 years. In addition, the ratio of El Ni?o to La Ni?a events turned from 2:3 to 1:1, and more El Ni?o events occurred in the 0 year after eruptions in the low-latitudes of the Northern Hemisphere and in the tropics but more La Ni?a events occurred in the 0 year after in the high-latitudes of the Northern Hemisphere and the Southern Hemisphere.(2) After the eruptions, the weak(W) El Ni?o events had increased by 8 percentage points and the very strong(VS) El Ni?o events had decreased by 10 percentage points; conversely, there was a decrease by 15 percentage points of the weak La Ni?a events and an increase by 11.4 percentage points of the very strong La Ni?a events. Specifically, the percentages of strong La Ni?a events increased to a peak at 1(+1) year after the eruptions.(3) The percentage of eruptions followed by single-year ENSO was the greatest. The percentage of ENSO events that occurred in the consecutive 2 years following an eruption was approximately equal to the percentage of events that occurred consecutively 3 years following an eruption, and both sets of ENSO magnitudes showed a decreasing trend.     

基于PS-InSAR技术的黄土大厚度挖方区回弹变形规律分析

以陕北某湿陷性黄土大厚度挖方地基工程为研究对象,采用PS-InSAR技术对2018-10—2019-11间获取的16景TerraSAR-X卫星影像进行处理,获取了湿陷性黄土挖方区回弹变形信息,总结了大厚度挖方区时序回弹变形特征。结果表明,由于上部土体应力卸载,在开挖区域存在地基土回弹变形现象,选取的高密度PS点变形信息较好地反映了研究区的真实变形情况,回弹变形范围与开挖边界吻合,另外挖方厚度越大,土体开挖引起的回弹变形越大;在开挖完成后的1年监测时间内,回弹区变形量随时间呈线性变化,在最大开挖厚度处,产生最大回弹量为29.3 mm;此外,PS-InSAR技术监测到的变形量与实地水准结果吻合性较好,表明该技术在黄土大厚度挖方区回弹变形监测中具有较好的应用效果。     

利用BDS与无人船进行污染源分析及处理

在大数据的背景下,充分利用北斗卫星导航系统（BDS）的定位功能,以无人船作为用户端,在水质数据采集和污染源位置的问题中积极探索新的实践方案,迅速、准确地找到污染源,减少河流污染物污染的时间,且无人船上装有净化模块,在发现污染时可作简易处理。在无人船上安装水质分析仪,水质分析仪的传输模块中安装经给防水处理的北斗卫星定位芯片和WiFi数据传输器,进而对河流的污染物种类及浓度进行分析,并采用大数据的计算方法,计算出污染源位置,向云平台反映污染源位置分析结果与污染物处理方法。通过BDS,将数据按照位置区域划分,并将能到达污染源的最短路径发送到处理人的移动设备上。本文通过对基于BDS定位的水质污染监测可视化系统进行分析,以期迅速找出污染源,减少水质污染现象的发生。     

无人机大比例尺测图像控点布设方案设计

随着无人机技术的快速发展,无人机航空摄影测量的精度也大大改善,以无人机为平台低空摄影测量大比例尺地图成为可能。本文以旋翼无人机搭载非测量型相机,通过布设不同数量像控点进行分析和研究,得到无人机摄影测量在农村地区像控点布设规律。结果证明在合理像控点布设的情况下,无人机测图数字成果空中三角测量、平面和高程精度均可满足1∶500、1∶1000、1∶2000大比例尺地形测图的精度要求。     

车载移动测量系统大比例尺测图精度控制研究

车载移动测量系统作为一种先进的测绘技术,已广泛应用于大比例尺测图项目中。SSW车载激光建模测量系统能够快速、高效、精确地完成大比例尺测图数据采集、处理等工作。不同比例尺对精度的要求不一样,而本文选择若干试验区,探讨不同的数据采集与处理方式对精度的影响,然后制订相应的精度控制方案,提高数据的精度,满足1∶1 000比例尺测图要求。