三维技术在新疆若羌坡一镍矿找矿预测中的运用

新疆若羌北山地区坡—镍矿为近期发现、评价的超大型岩浆硫化物型铜镍矿床,目前已查明的镍金属资源量达130万t.由于坡北地区岩浆活动频繁,岩相组成复杂,认为坡一成矿岩体为早二叠形成的复式岩体.通过对坡一镍矿岩相学、岩石学的对比研究,总结出各岩相的时空关系,甄别出主要成矿岩体,并结合各岩相所反映出的地球物理特征,建立了三维地质模型及物理模型.通过对比研究,指明坡一镍矿下一步找矿方向,通过三维预测对找矿远景进行了探讨.     

山东大地构造相研究方法划分方案与基本特征

在系统收集山东已完成的1∶5万、1∶20万和1∶25万区域地质资料基础上,通过编制山东省1∶25万实际材料图和建造构造图、1∶50万大地构造相五要素工作底图和1∶50万大地构造相图,全面介绍了大地构造相的定义、研究内容、指导思想、基本原则与编图程序。采用大地构造相编图作为大陆动力学研究的主要方法,是揭示不同陆块之间相互作用、形成过程和演化历史、研究山东大陆块体离散、会聚、碰撞、造山的大陆动力学过程的主要载体和具体表达形式。进而对山东大地构造相进行了划分,共划出华北陆块区、秦祁昆造山系和中国东部陆缘弧盆系相系3大相系,鲁西陆块、渤海陆块、大别苏鲁结合带、威海弧盆系、胶辽岩浆弧和华北裂谷盆地6个大相以及20个相和59个亚相,明确了其鉴别标志。对陆块区、造山系和陆缘弧盆系相系以及大相、相的基本特征进行了描述;简要总结了大地构造相与成矿尤其是金矿的关系,探讨了不同矿床与大地构造相的成因联系。     

Scales and causes of heterogeneity in bars in a large multi‐channel river: Río Paraná, Argentina

To date, published studies of alluvial bar architecture in large rivers have been restricted mostly to case studies of individual bars and single locations. Relatively little is known about how the depositional processes and sedimentary architecture of kilometre‐scale bars vary within a multi‐kilometre reach or over several hundreds of kilometres downstream. This study presents Ground Penetrating Radar and core data from 11, kilometre‐scale bars from the Río Paraná, Argentina. The investigated bars are located between 30 km upstream and 540 km downstream of the Río Paraná – Río Paraguay confluence, where a significant volume of fine‐grained suspended sediment is introduced into the network. Bar‐scale cross‐stratified sets, with lengths and widths up to 600 m and thicknesses up to 12 m, enable the distinction of large river deposits from stacked deposits of smaller rivers, but are only present in half the surface area of the bars. Up to 90% of bar‐scale sets are found on top of finer‐grained ripple‐laminated bar‐trough deposits. Bar‐scale sets make up as much as 58% of the volume of the deposits in small, incipient mid‐channel bars, but this proportion decreases significantly with increasing age and size of the bars. Contrary to what might be expected, a significant proportion of the sedimentary structures found in the Río Paraná is similar in scale to those found in much smaller rivers. In other words, large river deposits are not always characterized by big structures that allow a simple interpretation of river scale. However, the large scale of the depositional units in big rivers causes small‐scale structures, such as ripple sets, to be grouped into thicker cosets, which indicate river scale even when no obvious large‐scale sets are present. The results also show that the composition of bars differs between the studied reaches upstream and downstream of the confluence with the Río Paraguay. Relative to other controls on downstream fining, the tributary input of fine‐grained suspended material from the Río Paraguay causes a marked change in the composition of the bar deposits. Compared to the upstream reaches, the sedimentary architecture of the downstream reaches in the top ca 5 m of mid‐channel bars shows: (i) an increase in the abundance and thickness (up to metre‐scale) of laterally extensive (hundreds of metres) fine‐grained layers; (ii) an increase in the percentage of deposits comprised of ripple sets (to >40% in the upper bar deposits); and (iii) an increase in bar‐trough deposits and a corresponding decrease in bar‐scale cross‐strata (<10%). The thalweg deposits of the Río Paraná are composed of dune sets, even directly downstream from the Río Paraguay where the upper channel deposits are dominantly fine‐grained. Thus, the change in sedimentary facies due to a tributary point‐source of fine‐grained sediment is primarily expressed in the composition of the upper bar deposits.     

The influence of large-scale circulations on the extremely inactive tropical cyclone activity in 2010 over the western North Pacific

This study attempts to understand why the frequency of tropical cyclones (TC) over the western North Pacific (WNP) was a record low during the 2010 season, by analyzing the effect of several large-scale factors. The genesis potential index (GPI) can represent, to some extent, the spatial distribution of formation in 2010. However, the GPI does not explain the extremely low TC frequency. No robust relationship between the TC number and El Niño Southern Oscillation (ENSO) was found. A comparison of the extreme inactive TC year 2010 and extreme active year 1994 was performed, based on the box difference index that can measure the quantitative difference of large-scale environmental factors. Dynamic factors were found to be important in differentiating TC formation over the WNP basin between 2010 and 1994. The remarkable difference of monsoon flows in the WNP basin between these two years may be the cause of the difference in TC formation. The unfavorable conditions for TC genesis in 2010 may have also been due to other large scale factors such as: (1) weak activity of the Madden-Julian Oscillation during the peak season; (2) warming of the sea surface temperature in the tropical Indian Ocean during the peak season, causing the development of an anticyclone over the WNP basin and associated with the westward motion of the monsoon trough, and (3) the phase change of the Pacific Decadal Oscillation (more negative) and the two strong La Niña events that have evolved since 2006.     

风管式气举反循环钻具及其在大口径钻井施工中的应用

目前大口径钻井施工中常用的泥浆正循环钻进存在着泥浆流速慢、携渣能力差、重复破碎严重、钻井效率低、钻头磨损快、能源消耗大、钻井事故发生率高等问题,气举反循环钻进工艺可有效解决上述问题。风管式气举反循环钻井工艺简单易实现,能有效减少重复破碎,钻进效率高,能源消耗少,钻头寿命长,成井质量好,对涌水和漏失均有很好的抑制作用。介绍了风管式气举反循环钻井工艺原理、专用钻具及其现场使用情况。     

大水位落差深井止水修复方案及实施效果分析

以山西潞安集团和顺李阳煤业有限公司大水位落差深井止水修复方案及实施效果为工程实例,对该工程先后实施的管内注浆法、管外注浆法、衬管固井法、同径水泥架桥法、泄压通桥法等止水修复方案进行了详细分析,总结了其成功的经验,可为类似旧井修复工程或新井施工工程提供借鉴和指导。     

大直径气举反循环成套钻具的研制

介绍了大直径气举反循环成套钻具的研制背景、设计原则、结构尺寸和主要技术参数。该套钻具不仅强度大,连接便捷,而且充分考虑了通气、通泥浆、泥浆补给三大通道面积等因素,采用内平设计。经生产试验,完全能满足大直径工程井气举反循环钻进的需要。     

深孔及松软地层大口径绳索取心钻具的研究与应用

为解决深孔大口径及松软地层取心难的问题,推进取心钻探技术的发展,研发了一套大口径绳索取心钻具。着重介绍了大口径绳索取心钻具的结构特点、技术参数、技术创新及使用效果。应用结果表明,该大口径绳索取心钻具结构合理、各机构动作可靠、岩心采取率高,能够满足深孔及松软地层的取心要求。     

大裂隙堵漏剂在神农架矿区复杂地层钻进中的试验应用

通过大裂隙堵漏剂在神农架矿区复杂地层钻进的试验应用,论述了该堵漏剂堵漏性能参数及堵漏机理,总结了用该堵漏剂堵漏的操作方法;简述了野外施工试验的应用过程及应用效果。     

GYD-20型全液压动力头工程钻机的研制

针对传统工程钻机生产制造周期长、自动化程度低、劳动强度大、施工效率低等弊端,研制了GYD-20型全液压动力头工程钻机。介绍了该钻机的结构特点及其应用于大口径基础桩孔、煤矿通风孔钻进的情况和效果。