The origin of accretionary lapilli

Experimental investigations in a recirculating wind tunnel of the mechanisms of formation of accretionary lapilli have demonstrated that growth is controlled by collision of liquid-coated particles, due to differences in fall velocities, and binding as a result of surface tension forces and secondary mineral growth. The liquids present on particle surfaces in eruption plumes are acid solutions stable at 100% relative humidity, from which secondary minerals, e.g. calcium sulphate and sodium chloride, precipitate prior to impact of accretionary lapilli with the ground. Concentric grain-size zones within accretionary lapilli build up due to differences in the supply of particular particle sizes during aggregate growth. Accretionary lapilli do not evolve by scavenging of particles by liquid drops followed by evaporation — a process which, in wind tunnel experiments, generates horizontally layered hemispherical aggregates. Size analysis of particles in the wind tunnel air stream and particles adhering to growing aggregates demonstrate that the aggregation coefficient is highly grain-size dependent. Theoretical simulation of accretionary lapilli growth in eruption plumes predicts maximum sizes in the range 0.7–20 mm for ash cloud thicknesses of 0.5–10 km respectively.     

钻孔灌注桩施工对邻近运营隧道变形影响研究

桩基施工将引起周边地层位移和邻近隧道结构变形,以南京龙津桥改建项目桩基工程为背景,通过现场实测,分析研究钻孔灌注桩施工全过程各工况条件对地层位移场和邻近既有隧道结构变形的影响规律。结果表明:由于钢套管的护壁作用,钻孔灌注桩施工过程中产生的最大地层位移和隧道结构变形较小,说明采用“钢套管边旋压边取土”、“群桩间跳施工”等工艺,对周围土体扰动影响程度较小,建议近隧桩基工程采用全套管灌注桩的施工方法,监测分析结果可为类似工程提供技术参考。     

Large eddy simulation of hydrocyclone—prediction of air-core diameter and shape

Hydrocyclones are widely used in the mining and chemical industries. An attempt has been made in this study, to develop a CFD (computational fluid dynamics) model, which is capable of predicting the flow patterns inside the hydrocyclone, including accurate prediction of flow split as well as the size of the air-core. The flow velocities and air-core diameters are predicted by DRSM (differential Reynolds stress model) and LES (large eddy simulations) models were compared to experimental results. The predicted water splits and air-core diameter with LES and RSM turbulence models along with VOF (volume of fluid) model for the air phase, through the outlets for various inlet pressures were also analyzed. The LES turbulence model led to an improved turbulence field prediction and thereby to more accurate prediction of pressure and velocity fields. This improvement was distinctive for the axial profile of pressure, indicating that air-core development is principally a transport effect rather than a pressure effect.     

等截面单桩抗拔承载性状试验研究

在基坑中对等截面单桩进行了抗拔静载试验，在桩身设置应变式钢筋计，成功测得桩身各截面的应变数据。分析试验所得数据，对试验抗拔桩抗拔系数的取值、侧摩阻力的发挥、混凝土桩身的开裂等进行了探讨，相应给出了抗拔桩的设计建议。     

Stratigraphic evidence for multiple drainings of glacial Lake Missoula along the Clark Fork River, Montana, USA

Glacial Lake Missoula, a source of Channeled Scabland flood waters, inundated valleys of northwest Montana to altitudes of ∼ 1265 m and to depths of  >600 m, as evidenced by shorelines and silty lacustrine deposits. This study describes previously unrecognized catastrophic lake-drainage deposits that lie stratigraphically beneath the glacial-lake silts. The unconsolidated gravelly flood alluvium contains imbricated boulder-sized clasts, cross-stratified gravel with slip-face heights of 2-> 35 m, and 70- to 100-m-high gravel bars which all indicate a high-energy, high-volume alluvial environment. Gravel bars and high scablands were formed by catastrophic draining of one or possibly more early, high lake stands (1200-1265 m). Most glacial-lake silt, such as the Ninemile section, was deposited stratigraphically above the earlier deposits, represents a lower lake stand(s) (1050-1150 m), and was not deposited in lake(s) responsible for the highest discharge events. The glaciolacustrine silt-covered benches are incised by relict networks of valleys formed during the drainage of the last glacial lake. Significant erosion associated with the last lake draining was confined to the inner Clark Fork River canyon.     

东南沿海地震活动特征量

1970年以来,东南沿海地区经历了上世纪末以来明显的第Ⅴ活跃幕(或轮回)平静和活跃时段,本文通过分析研究这两个时段地震活动在时空强上的差异性,定量提取其活动演化过程参量,为该区未来地震活动期判定提供相对定量的参考依据。     

吸水剖面综合解释方法及应用

吉林油田同位素吸水剖面测井采用~(113)In同位素追踪技术,根据同位素追踪过程解释基本可以判断配水层段吸水情况。但是在注水井存在沾污、大孔道以及串槽等影响时,吸水面积确定比较困难。在同位素测井中增加井温、流量参数,通过多参数综合解释,不仅可以对沾污影响进行合理校正,确定准确的小层吸水量,而且能够正确判断各级封隔器、配水器的工作情况,在地层存在大孔道的情况下,确定地层的吸水面积。吸水剖面综合解释方法在吉林油田已普遍应用,见到明显的效果。     

干涉合成孔径雷达（INSAR）复图像配准方法

合成孔径雷达干涉测量技术是使用图像中的相位信息来提取高精度的数字地面高程模型。精确的图像配准是合成孔径雷达干涉技术提取数字高程模型的关键步骤之一，配准质量将直接影响提取的地面高程的精度。配准按照其精度分为粗配准和精配准。文中采用基于幅度互相关函数法完成图像的粗配准。在粗配准的基础上，使用最小二乘配准算法进一步提高配准的精度。实际数据处理表明，配准精度能够满足INSAR数据处理的要求。     

淄博市洪山、寨里煤矿地下水串层污染形成原因及防治

淄博市洪山、寨里煤矿区隐伏的奥陶系灰岩裂隙岩溶水污染严重。水质污染突发于矿坑全面闭坑以后，污染范围与矿坑水区一致，地下水污染组份与矿坑水的高含量组份相同。水质恶化主要由矿坑水串层污染所致。在此针对串层污染形成原因及影响因素，提出了防治对策。