基于空三模型实现非接触式实测地质剖面解决方案研究

本文提出的"基于空三模型实现非接触式实测地质剖面解决方案",是通过导出空间三维模型剖面多段线三维坐标,使用自主开发的辅助软件,在AutoCAD中快捷生成剖面图。通过实践,该方案能快速完成无需人工到实地进行实测的实测剖面工作,尤其危岩体勘查中能精确反映高陡崖区微地貌起伏形态和结构面特征,解决了人工实测无法完成的工作。     

Northern Adriatic phytoplankton response to short Po River discharge pulses during summer stratified conditions

A 275‐km‐long transversel Northern Adriatic profile from the mouth of the Po River (Italian Adriatic coast) to the Kvarner region (Croatian coastal island area) was investigated in three successive case studies in August 2008, 2009 and 2010. The short Po River pulses in August result in the surface advection of riverine water, nutrients and phytoplankton from the western to the eastern side of the Adriatic. This surface spreading exhibits inter‐annual variability depending on the riverine discharge in the preceding period. The Po River discharge pulse in August 2010 in particular resulted in an extraordinary tongue‐like advection of riverine water, nutrients, and phytoplankton towards the Eastern Adriatic coast. The phenomenon was detected using both satellite imagery and classical oceanographic measurements. In the advective water, toxic dinoflagellates were most abundant in August 2010, when the influence of the Po was greatest.     

弱流场调制下的海面微波散射模拟研究

根据海面微波散射的多尺度模型以及波流相互作用理论,对一维弱流场调制下的海面微波散射截面进行了数值模拟。结果表明,利用数值方法直接求解波作用量方程获得的海浪调制谱并结合多尺度模型可以较好地模拟弱流场引起的雷达散射截面的变化。内波等海洋现象调制了海浪谱,使得雷达散射截面反映出这些海洋特征,整个调制过程的模拟对于分析这些海洋现象并更好地利用其雷达数据具有重要意义。     

Critical Top Tension for Static Equilibrium Configuration of A Steel Catenary Riser

This paper aims to present the critical top tension for static equilibrium configurations of a steel catenary riser（SCR） by using the finite element method. The critical top tension is the minimum top tension that can maintain the equilibrium of the SCR. If the top tension is smaller than the critical value, the equilibrium of the SCR does not exist. If the top tension is larger than the critical value, there are two possible equilibrium configurations. These two configurations exhibit the nonlinear large displacement. The configuration with the smaller displacement is stable, while the one with larger displacement is unstable. The numerical results show that the increases in the riser＇s vertical distances, horizontal offsets, riser＇s weights, internal flow velocities, and current velocities increase the critical top tensions of the SCR. In addition, the parametric studies are also performed in order to investigate the limit states for the analysis and design of the SCR.     

Generating Velocities in Precursor Soliton Generation in a Straight Channel with Arbitrary Cross Section

利用准三维的ｆＫｄＶ方程及四区间划分法,理论上求得了先锋孤立子生成诸速度—先锋孤立子的运动速度、压水区中流的速度及尾波列第一个跨零点的速度。所述理论是Ｘｕ等人的先锋孤立子生成理论的一个推广。作为应用的例子,运用作者得到的理论结果,对具有相同截面面积的等腰三角形和正方形截面的直渠中先锋孤立子生成的诸速度进行了理论预报和数值比较。比较指出,理论和数值结果吻合得很好。     

Investigation on performance of all optical buffer with large dynamical delay time based on cascaded double loop optical buffers

Optical buffers are critical for optical signal processing in future optical packet-switched networks. In this paper, a theoretical study as well as an experimental demonstration on a new optical buffer with large dynamical delay time is carried out based on cascaded double loop optical buffers (DLOBs). It is found that pulse distortion can be restrained by a negative optical control mode when the optical packet is in the loop. Noise analysis indicates that it is feasible to realise a large variable delay range by cascaded DLOBs. These conclusions are validated by the experiment system with 4-stage cascaded DLOBs. Both the theoretical simulations and the experimental results indicate that a large delay range of 1--9999 times the basic delay unit and a fine granularity of 25 ns can be achieved by the cascaded DLOBs. The performance of the cascaded DLOBs is suitable for the all optical networks.     

海底隧道防排水技术浅析——以厦门翔安海底隧道为例

由于海底隧道的特殊性,其防排水技术与一般陆地隧道有着显著区别,本文介绍了厦门翔安海底隧道的防排水方案设计情况,对方案实施效果进行了评估．得出了海底隧道防排水应结合围岩与支护的自防水功能采取以堵为主的原则,并针对海底隧道防排水方案实施中的问题,提出了对初期支护背后注浆是重点,改进注浆材料等建议．从而论述了防排水技术是海底隧道工程建设的核心问题．     

圆紫菜(Pyropia suborbiculata)减数分裂时期的遗传分析与叶状体形态建成

本文以圆紫菜的绿色突变体(LT)和红色突变体(HT)进行杂交实验,证实了圆紫菜减数分裂发生的时期,并观察了圆紫菜的早期发育和形态建成过程。杂交F1叶状体中,出现了2种亲本色和2种重组色,它们分别为绿色(G,母本色)、红色(R,父本色)、野生色(W)和黄褐色(Y)。4种颜色在F1叶状体中形成了大量由2—4个色块组成的颜色嵌合体,色块出现了分离并呈线性排列。F1叶状体中嵌合体所占比例为82.9%,其中两嵌合最多,三嵌合次之,四嵌合最少。4种颜色在嵌合体的分离比为1G:0.97R:0.88W:0.69Y。上述结果证实圆紫菜的减数分裂发生在壳孢子萌发初期。减数分裂产生的四分子呈线形排列,随后继续发育成叶状体,叶状体发育至7—9个细胞时进行第一次纵向分裂,叶状体形态变宽。随后,圆紫菜梢部开始大量形成和放散单孢子,最终导致圆紫菜的形状为圆形或肾脏形。     

泥河湾盆地洞沟剖面的光谱光度时间序列

泥河湾盆地东部的洞沟剖面出露一套以湖相为主的地层,其顶部覆盖了末次间冰期古土壤与末次冰期黄土。测量了该剖面的光谱光度和磁化率,结果显示,亮度(L*)随深度的变化趋势基本与色度a*、色度b*相反,即低亮度值对应高色度值。砂层的亮度值相对低,而质量磁化率高。亮度记录可以与洛川黄土剖面的磁化率记录对比,即亮度低值段可与磁化率高值段对比,这可能源于两者都受东亚季风的控制。对比后获得了30个时间控制点,在此基础上,建立了洞沟剖面测量参数的时间序列。谱分析表明,各参数的时间序列显示了主要的米兰科维奇周期,这显示泥河湾古湖沉积物对古气候的周期性变化敏感。