抗震巷道内空调通风系统的设计与实现

为解决传统巷道内空调通风系统存在的信息采集准确率较低,性能较差、抗震巷道环境难以改善等问题,提出设计一种新的抗震巷道内空调通风系统。先将系统的整体架构划分为采集层、控制层和监管层三部分,以主控制器为核心,对系统各执行组件做出正确地判断,并对各组件进行统一化控制,完成系统的硬件设计;创建中心服务器信息处理过程,设定风机运行指令,主动采集风速等环境信息,获取实际环境状态,将设定值与实际值进行对比,依据对比结果判断风机是否正常运行,实现系统软件功能的开发。实验结果表明,在不同的震级条件下,该系统能够有效改善抗震巷道环境,系统的信息采集准确率高达85%左右,充分验证了该系统的优越性。     

白浪覆盖率模式中参量的研究

在波面位移为正态过程的假定下,推导出一种以平均周期和风速为参量的白浪覆盖率公式W=1-Φ[5.11094[-T/U10]0.7576].依据摩擦风速和U10的表达式,进一步推导出白浪覆盖率依赖于摩擦风速的形式W=1-Φ[0.5227[-T/U]0.7576]].考虑到在实际应用中,经常需要用波龄描述波浪的状态,将白浪覆盖率表示成一种形式简单的波龄的函数W=1-Φ(3.6496ξ0.7576),与Monahan等的海上测量数据符合良好.     

基于多因子及泰勒级数的滑坡变形预测模型研究

将滑坡的变形看作时间、月降雨量、气温的函数,使用泰勒级数建立它们的函数关系,并将泰勒级数展开至二次项,建立卡尔曼滤波模型,用于滑坡变形的预测预报。实例计算表明,卡尔曼滤波模型的拟合效果和预测效果良好,可用于土质滑坡变形的短期预测预报。     

铣削斜楔形区域形成及其对流场负压区的影响规律

【目的】研究在内喷淋冷却高速铣孔加工中,铣削斜楔形区域的形成对流场负压区的影响。【方法】对高速湿式铣削加工区域建立三维流场模型,应用计算流体力学软件Fluent,采用非结构化四面体网格单元,利用滑移网格技术对高速铣削过程进行三维瞬态计算。【结果】得到不同刃数、不同转速的立铣刀对同一孔径工件进行切削时流场的压力分布情况。三刃立铣刀斜楔形对流场负压影响最大,当立铣刀刃数增加时,此斜楔形区缩小,负压减小,转速为10 000～20 000 r/min时增长速度逐渐降低,20 000～35 000 r/min时增长速度逐渐增高。【结论】从流场角度分析,流场中最大负压值与转速呈正相关,转速的提高增加了抑制空化的难度;增加铣刀刃数,可减小流场斜楔形区面积,减小空化可能。     

基于KiK-net数据的偏振分析方法计算震中方位角影响因素分析

基于日本KiK-net强震动观测记录,以提高计算震中方位角的准确性为目标,研究记录参量(加速度、速度、位移)、计算时间窗和滤波频带对偏振分析方法计算震中方位角结果的影响。结果表明,在该研究的地震数据条件下,采用位移记录、计算时间窗为1s、滤波频带取0.1～20Hz时,可以获得最佳的震中方位角计算结果,震中方位角的计算偏差为45°时所占比例为88%。     

Use of Geomorphological Information in Indirect Landslide Susceptibility Assessment

The objective of this paper is to evaluate the importance of geomorphological expert knowledge in the generation of landslide susceptibility maps, using GIS supported indirect bivariate statistical analysis. For a test area in the Alpago region in Italy a dataset was generated at scale 1:5,000. Detailed geomorphological maps were generated, with legends at different levels of complexity. Other factor maps, that were considered relevant for the assessment of landslide susceptibility, were also collected, such as lithology, structural geology, surficial materials, slope classes, land use, distance from streams, roads and houses. The weights of evidence method was used to generate statistically derived weights for all classes of the factor maps. On the basis of these weights, the most relevant maps were selected for the combination into landslide susceptibility maps. Six different combinations of factor maps were evaluated, with varying geomorphological input. Success rates were used to classify the weight maps into three qualitative landslide susceptibility classes. The resulting six maps were compared with a direct susceptibility map, which was made by direct assignment of susceptibility classes in the field. The analysis indicated that the use of detailed geomorphological information in the bivariate statistical analysis raised the overall accuracy of the final susceptibility map considerably. However, even with the use of a detailed geomorphological factor map, the difference with the separately prepared direct susceptibility map is still significant, due to the generalisations that are inherent to the bivariate statistical analysis technique.     

千将坪滑坡动力学过程仿真模拟

滑坡体的失稳破坏是一个动态过程,动力学行为起着非常重要的作用。采用DDA方法对长江三峡库区千将坪滑坡的运动全过程进行了数值模拟研究。模拟方案充分依据该滑坡的地质、地形特征,按不同岩土体和地质结构面类型进行块体单元划分,模拟了滑坡发生、发展的渐进破坏过程以及滑坡触发后的运动情况。模拟结果表明,千将坪滑坡是以斜坡坡脚的局部破坏为其运动的开始阶段,并进一步牵引上部滑体,在地下水压力作用下最终产生整体滑动。     

Modeling the sediment yield from landslides in the Shihmen Reservoir watershed,Taiwan

Landslides generate enormous volumes of sediment in mountainous watersheds; however, quantifying the downstream transport of landslide‐derived sediment remains a challenge. Landslide erosion and sediment delivery to the Shihmen Reservoir watershed in Taiwan was estimated using empirical landslide frequency–area and volume–area relationships, empirical landslide runout models, and the Hydrological Simulation Program‐ FORTRAN (HSPF). Landslide erosion rates ranged from 0.4 mm yr^‐1 to 2.2 mm yr^‐1 during the period 1986–2003, but increased to 7.9 mm yr^‐1 following Typhoon Aere in 2004. The percentage of landslide sediment delivered to streams decreased from 78% during the period 1986–1997 to 55% in 2004. Although the delivery ratio was lower, the volume of landslide sediment delivered to streams was 2.81 × 10⁶ Mg yr^‐1 in 1986–1997 and 8.60 × 10⁶ Mg yr^‐1 in 2004. Model simulations indicate that only a small proportion of the landslide material was delivered downstream. An average of 13% of the landslide material delivered to rivers was moved downstream during the period 1986–1997. In 2004, the period including Typhoon Aere, the annual fluvial sediment yield accounted for approximately 23% of the landslide material delivered to streams. In general, the transfer of sediment in the fluvial system in the Shihmen Reservoir watershed is dominantly transport limited. The imbalance between sediment supply and transport capacity has resulted in a considerable quantity of landslide material remaining in the upper‐stream regions of the watershed. Copyright © 2012 John Wiley & Sons, Ltd.     

陕南膨胀土及其滑坡灾害研究

膨胀土在陕南汉江流域的汉中盆地、西乡盆地及安康盆地分布广泛，其面积约达1300km2，占汉江流域中3个盆地面积的1/2以上. 由于膨胀土土体的胀缩变形和土体结构变异，导致滑坡灾害广泛发育，致使工程建筑和农田破坏，给国家和人民造成了巨大的经济损失，因此，研究陕南膨胀土及其滑坡灾害，不论在理论和实践等方面，对陕南的经济建设都具有十分重要的意义.     

多工况下汉源二蛮山滑坡机理数值模拟

利用FLAC3D软件对四川省雅安市汉源县二蛮山滑坡坡体进行建模,模拟降雨滑坡过程,并进行应力应变特征及稳定性计算分析,从而为深入研究地震及降雨诱发再次滑坡及防灾减灾提供可靠依据。研究中假设地震工况,对边坡进行详细的动力分析,得到了各监测点动力特征曲线;通过降雨工况下坡体稳定性系数分析得到了不同强度折减安全系数。研究结果表明,滑源区相对特殊的地形条件和地质构造以及不利的结构面组合是滑坡的基础;前期强降雨期间饱水加载以及大量雨水沿斜沟张裂结构面的下渗软化作用,是诱发滑坡发生的关键因素。