Seismic interaction in linearly connected electrical substation equipment

An electrical substation consists of a complex set of equipment items that are interconnected through conductor buses or cables. If the connections are not sufficiently flexible, significant dynamic interaction may occur between the connected equipment items during a seismic excitation. This interaction is believed to be responsible for some of the observed substation equipment damage in recent earthquakes. This paper investigates the interaction between two equipment items connected by a linear spring‐dashpot or spring‐dashpot‐mass element representing a conductor bus. It is found that the interaction between the two equipment items may significantly amplify the response of the higher‐frequency equipment item. The influences of various key parameters on the interaction effect are quantified. Means for reducing the adverse interaction effect are described. Copyright © 2001 John Wiley & Sons, Ltd.     

The inversion of anelastic coefficient,source parameters and site respond using genetic algorithm

It gradually becomes a common work using large seismic wave data to obtain source parameters, such as seismic moment, break radius, stress drop, with completingof digital seismic network in China (Hough, et al, 1999; Bindi, et al, 2001). These parameters are useful on earthquake prediction and seismic hazard analysis.Although the computation methods of source parameters are simple in principle and the many research works have been done, it is not easy to obtain the parameters accurately. There are two factors affecting the stability of computation results. The first one is the effect of spread path and site respond on signal. According to the research results, there are different geometrical spreading coefficients on different epicenter distance. The better method is to introduce trilinear geometrical spreading model (Atkinson, Mereu, 1992; Atkinson, Boore, 1995; WONG, et al, 2002). In addition, traditional site respond is estimated by comparing with rock station, such as linear inversion method (Andrews, 1982), but the comparative estimation will introduce some errors when selecting different stations. Some recent research results show that site respond is not flat for rock station (Moya, et al, 2000; ZHANG,. et al, 2001; JIN, et al, 2000; Dutta, et al, 2001). The second factor is to obtain low-frequency level and corner frequency fromdisplacement spectrum. Because the source spectrum model is nonlinear function,these values are obtained by eye. The subjectivity is strong. The small change of corner frequency will affect significantly the result of stress drop.     

转换大陆边缘盆地深水浊积砂岩油气成藏差异性研究

深水浊积砂岩油气藏是当今世界油气勘探的热点领域。基于地震、钻井、地球化学等资料,系统分析了西非北段科特迪瓦盆地深水浊积砂岩油气成藏的差异性。研究表明,科特迪瓦盆地经历了裂陷期（早白垩世）和漂移期（晚白垩世—现今）两大构造演化阶段,漂移期发育塞诺曼—土伦阶优质海相烃源岩,裂陷期发育阿普特—阿尔布阶湖相烃源岩。漂移期层系为盆地的主力勘探层系,发育两种类型的浊积砂岩油气藏。塞诺曼—土伦阶浊积砂岩油气藏为典型的“砂体运移、自生自储、源内成藏”的油气成藏模式,其油气主要来源于塞诺曼—土伦阶烃源岩,广泛分布的浊积砂岩是油气运移的主要路径,烃源岩的生、排烃期决定了油气成藏时期,是否发育有效烃源岩是该类油气藏成藏的主控因素。圣通—马斯特里赫特阶浊积砂岩油气藏为典型的“断裂运移、下生上储、源外成藏”的油气成藏模式,其油气主要来源于深部裂陷期阿普特—阿尔布阶湖相烃源岩,断裂是油气运移的主要路径,断裂的活动控制了油气的运移和成藏时期,是否发育油源断裂是该类油气藏成藏的主控因素。     

致密砂岩气藏可动流体赋存特征的微观地质因素: 以苏里格气田东部盒8段储层为例

以苏里格气田东部盒8段典型的致密砂岩气藏为例,运用核磁共振、恒速压汞、铸体薄片、物性、X-衍射等实验资料,探讨了影响可动流体赋存差异的微观地质 因素。结果表明,盒8段储层可动流体饱和度低,T₂谱分布均为左高峰右低峰的双峰态;黏土矿物的充填与孔隙类型是孔隙结构复杂的重要因素,孔隙结构是影响可动流体赋存特征的关键;面孔率、喉道 半径、孔喉半径比是影响可动流体饱和度的主要因素,有效孔隙体积、分选系数对可动流体饱和度影响明显,储层物性、黏土矿物、有效喉道体积、孔隙半径对可动流体饱和度影响较弱。     

Study on comparison between absolute and relative input energy spectra and effects of ductility factor

Introduction Estimation of an attenuation relationship for strong ground motion parameters has been an interesting research subject in the field of engineering seismology and has played a very important role in seismic safety evaluation, seismic zoning, seismic hazard evaluation of major constructions, etc. At present, the generally used parameters include peak acceleration, peak velocity and elastic response spectrum. Such parameters mentioned above are essentially independent of the duration…     

Knowledge Representation Methods in Expert System for Earthquake Prediction ESEP 3.0

INTRODUCTIONKnowledgerepresentationandknowledgeacquisitionarekeyissuesinbuildinganexpertsystem .Theyarecloselyrelatedtothedomainproblem solvinglevelandcompetenceoftheexpertsystem .Intheknowledgeacquisitionprocess,thedomainexpertwillfirstofferandorganizepr…     

工程结构三维疲劳裂纹最大应力强度因子计算

介绍了裂纹的类型、裂纹尖端应力场的奇异性。以一维问题为例,推导论证了奇异单元能够很好的反映裂纹尖端应力场的奇异性。应力强度因子一般表达式表明应力强度因子与载荷呈线性关系,并依赖于物体和裂纹的几何形状和尺寸。本文借助大型通用有限元软件ANSYS,采用位移外插法计算了三维表面裂纹前沿不同位置处的应力强度因子,并与《应力强度因子手册》基于实验的理论公式计算结果相比较。结果表明:有限元结果与理论解误差较小,裂纹最深处应力强度因子最大。     

中国区域全要素生产率的空间溢出关联效应研究

运用空间计量模型对1990~2011年中国全要素生产率进行研究,发现：此间中国省域全要素生产率在大部分年份呈现了空间自相关性,表明这22 a间中国省域全要素生产率并不是完全的随机状态,受其它区域的影响。进一步运用空间计量经济模型从空间维度探究了区域全要素生产率的影响因素,研究表明：经济的集聚水平越高,全要素生产率会得到显著改善;人力资本对经济增长与效率的提升有着显著地积极作用,并表现一定程度的溢出;政府干预和产业结构对全要素生产率的影响为负,说明政府部门要减少对经济的干预;同时表明了中国的产业结构可能存在不合理的地方;信息化水平、基础设施水平对全要素生产率的影响为正,但基础设施水平在统计学意义上并不显著;民营化所占比重的提升对全要素生产率的改进是显著的,因为私有化致使企业的权力下放有助于提高技术效率;经济开放水平显著提升了中国的区域全要素生产率;中国部分省份土地投入规模过大而出现规模不经济的问题。从全要素生产率在各个地区间溢出的证据出发,各个地方政府在统筹区域经济发展的过程中不仅需要考虑本地区经济发展的实际,需要打破目前行政区经济的界限,实现跨区域的协调与合作,实现共赢,最终实现所有地区全要素生产率的提高。     

1975-2015年鄂尔多斯市沙漠化的时空演变过程

鄂尔多斯市地处温带草原向荒漠草原过渡的半干旱区,是中国沙漠化问题较为严重的区域之一,其土地沙漠化发展和逆转过程及影响因素在北方农牧交错带具有代表性。以7期Landsat卫星遥感数据为信息源提取沙漠化土地类型及程度的时空格局信息,分析了该地区自1975年以来的土地沙漠化过程,并结合气象及社会经济数据采用主成分分析法对驱动因子进行定量分析。结果表明：在脆弱生态环境背景下,鄂尔多斯市土地沙漠化受人口数量增加、过垦及过牧等人为因素的严重影响。不同时段土地沙漠化发展的方向与驱动力都有所不同,1975-2000年是土地沙漠化的急剧发展期,驱动力以人为因素为主导,自然因素为基础;2000-2015年是土地沙漠化的逆转期,驱动力以自然因素为主,人为因素为辅。