韧性剪切作用下千枚岩中SiO2的迁移模拟实验—以金山金矿为例

实验较好地模拟了韧性剪切作用过程中ＳｉＯ２“释放－局部迁移”的迁移过程。实验结果表明：４００℃条件下,绢云母,绿泥石等矿物在韧性剪切作用下分解,解释出大量ＳｉＯ２,在成矿流体的参与下发生局部迁移,聚集。要使ＳｉＯ２发生大规模的迁移,富集,还需要一个相对开放的环境（如脆性剪切变形）。     

PROGRAM FOR PROCESSING OF HISTORICAL LABORATORY DATA BASED ON FUZZY SET THEORY AS A TOOL FOR DECISION SUPPORT

A computer program(FEA)is presented for processing historical laboratory data.It performs on a list ofsample entries stored in a laboratory information management system.Using an algorithm which is basedon fuzzy set theory,FEA classifies the entries into a limited number of clusters called sample types.Theclassification is fully user-defined.The program transforms the historical data into a representation whichis more suitable for studying the performance of the laboratory or which can be used as preparation for asimulation project.     

Orbit injection error analysis for the Lageos III mission

An analysis is presented of the orbital injection errors for the Lageos III satellite mission. Several methods are introduced for the solution of the Inverse Problem in the Theory of Errors. The novelty of the present approach consists in the use of the full geopotential covariance matrix in the error propagation equations. The GEM-T1 covariance matrix is used. It is found that by properly accounting for the correlation among the even zonal harmonic coefficients the acceptable error bounds increase by an order of magnitude with respect to the case when only the variances are used. The most stringent constraint, even when using the full covariance, is on inclination, whose nominal value must be realized within approximately 0.1° for the recovery of the Lense-Thirring precession to be successful at the 3% level (accounting only for injection errors). The associated tolerance in the semimajor axis is about 30 km while that in eccentricity is approximately 0.2. However, if the errors in semimajor axis and eccentricity can be kept to the routinely achievable levels respectively of 10 km and 0.004, then the tolerance in inclination can be relaxed to 0.2°.     

Kinetic study of the hydrocarbon generation from Upper Paleozoic coals in Ordos Basin

When organic matter during geological processes is affected by a variety of factors such as paleotemperature, and time, complicated chemical reactions will occur, finally resulting in the generation of petroleum and natural gas. These reactions leading to…     

Chemical Mechanism Development: Laboratory Studies and Model Applications

Within the German Tropospheric Research Programme (TFS) numerous kinetic and mechanistic studies on the tropospheric reaction/degradation of the following reactants were carried out: oxygenated VOC, aromatic VOC, biogenic VOC, short-lived intermediates, such as alkoxy and alkylperoxy radicals.At the conception of the projects these selected groups were classes of VOC or intermediates for which the atmospheric oxidation mechanisms were either poorly characterised or totally unknown. The motivation for these studies was the attainment of significant improvements in our understanding of the atmospheric chemical oxidation processes of these compounds, particularly with respect to their involvement in photooxidant formation in the troposphere. In the present paper the types of experimental investigations performed and the results obtained within the various projects are briefly summarised. The major achievements are highlighted and discussed in terms of their contribution to improving our understanding of the chemical processes controlling photosmog formation in the troposphere.     

扎基斯坦矿床河西段水文地质试验的可行性分析

在分析扎吉斯坦矿床河西段水文地质条件的基础上,对该地段进行水文地质试验的可行性做了较为详细的论述,提出了无压-承压井抽水模式和“拦水坝”式冲孔洗井等新工艺。     

流域物质与水系及产沙间非线性关系实验研究

在３５．５６ｍｍ／ｈ．ｃｍ＾２定雨强的人工降雨条件下,组成物质中径分别为０．０２１ｍｍ、０．０６６ｍｍ及０．０７６ｍｍ的发育对比实验表明,产沙过程具有波动振荡衰减特征;水系发育以增加河道（沟道）数目及弯曲拉伸长度两种方式进行最小消能。水系分形维数正是这种消能的量度。水系分数维值随时间呈不对称上凹型曲线。对比分析表明：产沙过程的振荡性、衰减率,随物质变粗而加强,水系河道数目随物质变细而增多,河道随物     

人工多晶橄榄石样品孔隙压缩高温高压实验研究

人工制备多晶橄榄石样品的高孔隙度是实验关注的问题之一。本文着重研究在给定温度条件下人工多晶橄榄石样品高温高压孔隙压缩问题。文中给出了含水的湿样品和干燥样品孔隙度与实验压力的关系曲线,并提出了衡量样品压实程度的压实系数Ｖｏ／Ｖ的概念。     

黔东南锦屏-天柱地区构造控岩控金特征模拟实验及其力学分析

在前人工作基础上,侧重研究石英脉型金矿床成矿的地质背景,建立了该类型金矿的成矿模式。进而开展三轴温压条件下的成岩成矿实验,构造形变特征及其与成矿物质活化、迁移、富集之间的相互关系的模拟实验。实验结果表明:(1)该区岩石、矿石在高温高压条件下,产生塑性变形(褶皱)和脆性变形(破裂);(2)在变形过程中使成矿物质活化、迁移和富集,形成顺层及穿层的含金石英脉,并在多期多次变形过程中使成矿物质叠加富集;(3)在褶皱(背斜)轴部形成富矿体。模拟实验结果与所建立的该类型金矿构造控矿和成矿模式非常相似。实验资料的力学分析表明,由轴压所产生的构造附加压力大大地提高了实际围压,从而促进了岩石流变、变形和物质的迁移,由此促进含矿流体向构造附加压力小的部位定向迁移、充填和成矿。构造附加压力是促进该区金成矿的重要动力条件。     

浅议浅黄色花岗岩板材在高温条件下变色因素

奇台县菊花黄花岗岩板材,经高温氧-乙炔喷焰烧后呈褐红色薄膜状石材板,使其经济价值增加80%.菊花黄花岗岩板材中的钾长石矿物经高温氧-乙炔喷焰烧后,当其受热达到一定的温度时褐黄色微斜长石中所含的低价铁氧化物中的2价铁离子变为3价铁离子,使岩石的颜色由黄色转化为褐红色,微斜长石由三斜晶系向稳定的单斜晶系转变,由于高于900℃高温作用石材表面时间短,故能在石材表面形成厚约1mm左右的红色薄膜.经褪色强化实验,从理论上推测该红色薄膜石材在大气条件下可保持10年以上不褪色.