Paleostress Reconstruction of Micangshan Anticlinorium on the Southern Margin of the Qinling Orogenic Belts, China

Brittle structures in rock of different ages can be used to establish the tectonic evolution of an orogenic belt through paleostress calculations. Micangshan is located at the southern margin of the Qinling orogenic belt,between the SE-trending Longmenshan fold-and-thrust belt and the arcuate Dabashan thrust-and-fold belt. Structural observations revealed that the dominant structures are reverse and strike-slip faults and folds with E–W and NE–SE trends. To increase knowledge of the tectonic evolution of the Micangshan anticlinorium,faults,joints,veins,and folds were measured at more than eighty sites. On the basis of structural analysis,it emerged that the multiphase paleostress fields became established after the oblique collision between the North and South China plates. The earliest stress field with N–S compression was established during the Micangshan uplift associated with the E–W trending faults and folds. Subsequently,a N–S extension occurred when the Qinling orogenic belt collapsed. Then NW–SE compression developed,with NE trending faults and folds forming in relation to Longmenshan thrusting toward southwest on the eastern margin of the Tibetan plateau. With the development of the arcuate Dabashan orogenic belt,the compression stress orientation of the Micangshan anticlinorium altered from NE–SW to E–W.     

基于马尔科夫链的北斗行驶记录仪数据存储算法研究

介绍了北斗行驶记录仪的组成和功能,对定时1 s和定时60 s报送或存储进行了对比和优劣分析,根据道路匹配特性,给出了一种基于马尔科夫链的北斗行驶记录仪数据存储算法,将马尔科夫链上的节点（拐点）作为记录仪存储或传输的位置点,通过采集车辆状态信息和定位模块输出信息对“拐点”计算方法进行分析和推导,并通过多次实际跑车测试,测试结果表明：与定时1 s报送或存储相比,节省率可达到90％以上,大大节省了存储空间或者通信费用,具有较好的使用效果。     

New interpretation of the Franciscan mélange at San Simeon coast,California: tectonic intrusion into an accretionary prism

Many concepts and interpretations on the formation of the Franciscan mélange have been proposed on the basis of exposures at San Simeon, California. In this paper, we show the distribution of chaotic rocks, their internal structures and textures, and the interrelationship between the chaotic rocks and the surrounding sandstones (turbidites). Mélange components, particularly blueschists, oceanic rocks, including greenstone, pillow lava, bedded chert, limestone, sandstone, and conglomerate, have all been brecciated by retrograde deformation. The Cambria Slab, long interpreted as a trench slope basin, is also strongly deformed by fluidization, brecciation, isoclinal folding, and thrusting, leading us to a new interpretation that turbiditic rocks (including the Cambria Slab) represent trench deposits rather than slope basin sediments. These rocks form an accretionary prism above mélanges that were diapirically emplaced into these rocks first along sinistral-thrust faults, and then along dextral-normal faults. Riedel shear systems are observed in several orders of scale in both stages. Although the exhumation of the blueschist blocks is still controversial, the common extensional fractures and brecciation in most of the blocks in the mélanges and further mixture of various lithologies into one block with mélange muddy matrix indicate that once deeply buried blocks were exhumed from considerable depths to the accretionary prism body, before being diapirically intruded with their host mélange along thrust and normal faults, during which retrograde deformation occurred together with retrograde metamorphism. Recent similar examples of high-pressure rock exhumation have been documented along the Sofugan Tectonic Line in the Izu forearc areas, in the Mineoka belt in the Boso Peninsula, and as part of accretionary prism development in the Nankai and Sagami troughs of Japan. These modern analogues provide actively forming examples of the lithological and deformational features that characterize the Franciscan mélange processes.     

Tectonic control of accommodation space and sediment supply within the Mata Amarilla Formation (lower Upper Cretaceous) Patagonia,Argentina

The Mata Amarilla Formation dates from the early Upper Cretaceous and was deposited during a transition in tectonic regime from the extensional Rocas Verdes Basin to the Austral Foreland Basin. Detailed sedimentological logs and architectural parameters were used to define 13 facies associations. The distribution of facies associations and associated variations in fluvial architecture have enabled large‐scale changes in accommodation space/sediment supply ratios (A/S ratio) to be defined for the three component sections of the Mata Amarilla Formation. The lower and upper sections are characterized by a high A/S ratio, whereas the middle section corresponds to a low A/S ratio. In the western part of the study area, small‐scale variations in the A/S ratio were recognized in the middle section. The strong west to east trend in evolution of the fluvial systems coincides with the direction of propagation of the Patagonian fold and thrust belt, which is located to the west of the study area. Intervals of high A/S ratio (i.e. lower and upper sections) are interpreted to have developed during periods of increased loading by the fold and thrust belt caused by tectonic uplift. In contrast, intervals of low A/S ratio (i.e. middle section) were developed during periods of tectonic quiescence. This article suggests that the large‐scale variations in A/S ratios are related to different rates of migration and growth of the Patagonian fold and thrust belt, whereas the small‐scale variation occurred in response to specific periods of thrusting and folding in the Patagonian fold and thrust belt (i.e. local loads). This field example of the effects of different scales of variation in A/S ratios across the Austral Foreland Basin could be used to recognize similar tectonically forced variations in stratigraphic architecture in other foreland basins throughout the world, as well as to understand the response of fluvial systems to such changes.     

Displacement transfer from fault-bend to fault-propagation fold geometry: An example from the Himalayan thrust front

The leading edge of the ENE-trending Himalayan thrust front in Pakistan exhibits along-strike changes in deformational style, ranging from fault-bend to fault-propagation folds. Although the structural geometry is very gently deformed throughout the Salt Range, it becomes progressively more complex to the east as the leading edge of the emergent Salt Range Thrust becomes blind. Surface geology, seismic reflection, petroleum well, and chronostratigraphic data are synthesized to produce a 3-D kinematic model that reconciles the contrasting structural geometries along this part of the Himalayan thrust front. We propose a model whereby displacement was transferred, across a newly-identified lateral ramp, from a fault-bend fold in the west to fault-propagation folds in the east and comparable shortening was synchronously accommodated by two fundamentally different mechanisms: translation vs. telescoping. However, substantially different shortening distribution patterns within these structurally contrasting segments require a tear fault, which later is reactivated as a thrust fault. The present geometry of this S-shaped displacement transfer zone is a combined result of the NW–SE compression of the lateral culmination wall and associated tear fault, and their subsequent modification due to mobilization of underlying ductile salt.     

地层剖面计算表的计算机自动处理

地层剖面计算表的计算机自动处理 ,涉及剖面是由老地层向新地层测制还是由新地层向老地层测制、褶皱的识别处理、存在回测时 (特别是在回测中又存在背向斜时 )的处理、测段厚度及分层厚度的计算等几个主要环节。文章引入剖面方向系数 η、测段方向系数κ、回测系数 ρ 3个新参数 ,建立了地层剖面计算表自动处理的数学模型 ,可以非常方便地将剖面图及其柱状图以矢量格式输出     

陕西蟒岭马河地区宽坪群多期褶皱变形

据面理置换、小褶皱叠加、线理构造,以及对大中型构造的分析,再结合原生沉积构造和构造几何学分析,确定马河地区宽坪群经历了至少三期叠加变形.第一期为区域性挤压的紧闭平卧褶皱,第二期为穹窿状或长垣状褶皱.第三期为南北向开阔宽缓褶皱。查清构造为正确建立层序提供了依据.     

潼峪金矿区成矿断裂构造特征

潼峪金矿区发育过冲剪滑型、平移剪张型和平移剪滑型三种不同性质、不同方向成矿断裂,分布在金罗斑背形的不同部位,其形成有先后差异,但变形环境大体相同,具脆-韧性变形特征。空间上一般不超越褶皱主体。三类断裂中,前两者具石英脉型金矿化,后者形成构造蚀变岩型及小规模石英脉型金矿化。矿化差异与断裂产出的褶皱部位及其相应的应力应变条件的不同有关。     

褶皱变形系数在煤与瓦斯突出预测中的应用

对以褶皱构造为主要构造型式的突出矿片来说，用褶皱变形系数这一定量指标，通过控制煤和瓦斯突出褶皱构造的研究，在一定程度上能提高突出预测的准确率。本文针对平顶山东矿区煤层褶皱变形的特点，分别用剖面变形系数法和平面变形系数法进行了突出危险性预测研究，取得了较可靠的预测结果。     

川东“侏罗山式”褶皱的数值模拟及成因探讨

本文通过采用有限差分法（FLAC）对“侏罗山式”褶皱进行数值模拟发现,层间粘聚力差异和上覆压力是控制隔档式褶皱、隔槽式褶皱样式的主要因素,即层间的能干性差异和埋深的控制。当地层在埋深较浅时,层间能干性差异对褶皱样式起主控作用,能干性差异小时出现隔槽式褶皱,差异大时出现隔档式褶皱。随着埋深加大,压力逐渐起主要作用,这时仅出现隔槽式褶皱。川东东带褶皱地层总体上层间能干性差异小,因而盖层的深部与浅部皆出现隔槽式褶皱,与模拟结果一致。西带褶皱地层总体层间能干性差异大,因而浅部出现隔档式褶皱。而其深部的下古生界地层主要受上覆压力控制,根据模拟推测应为隔槽式褶皱。