改进的能量守恒方法及其在CHAMP重力场恢复中的应用

An efficient method for gravity field determination from CHAMP orbits and accelerometer data is referred to as the energy balance approach. A new CHAMP gravity field recovery strategy based on the improved energy balance approach IS developed in this paper. The method simultaneously solves the spherical harmonic coefficients, daily Integration constant, scale and bias parameters. Two 60 degree and order gravitational potential models, XISM-CHAMPO1S from the classical energy balance approach, and XISM-CHAMPO2S from the improved energy balance, are determined using about one year＇s worth of CHAMP kinematic orbits from TUM and accelerometer data from GFZ. Comparisons among XISM-CHAMPO1S, XISM-CHAMPO2S, EIGEN-CGO3C, EIGEN-CHAMPO3S, EIGEN2, ENIGNIS and EGM96 are made. The results show that the XISM-CHAMPO2S model is more accurate than EGM96, EIGENIS, EIGEN2 and XISM-CHAMPO1S at the same degree and order, and has almost the same accuracy as EIGEN-CHAMPO3S.     

GNSS three carrier ambiguity resolution using ionosphere-reduced virtual signals

This paper presents a general modeling strategy for ambiguity resolution (AR) and position estimation (PE) using three or more phase-based ranging signals from a global navigation satellite system (GNSS). The proposed strategy will identify three best “virtual” signals to allow for more reliable AR under certain observational conditions characterized by ionospheric and tropospheric delay variability, level of phase noise and orbit accuracy. The selected virtual signals suffer from minimal or relatively low ionospheric effects, and thus are known as ionosphere-reduced virtual signals. As a result, the ionospheric parameters in the geometry-based observational models can be eliminated for long baselines, typically those of length tens to hundreds of kilometres. The proposed modeling comprises three major steps. Step 1 is the geometry-free determination of the extra-widelane (EWL) formed between the two closest L-band carrier measurements, directly from the two corresponding code measurements. Step 2 forms the second EWL signal and resolves the integer ambiguity with a geometry-based estimator alone or together with the first EWL. This is followed by a procedure to correct for the first-order ionospheric delay using the two ambiguity-fixed widelane (WL) signals derived from the integer-fixed EWL signals. Step 3 finds an independent narrow-lane (NL) signal, which is used together with a refined WL to resolve NL ambiguity with geometry-based integer estimation and search algorithms. As a result, the above two AR processes performed with WL/NL and EWL/WL signals respectively, either in sequence or in parallel, can support real time kinematic (RTK) positioning over baselines of tens to hundreds of kilometres, thus enabling centimetre-to-decimentre positioning at the local, regional and even global scales in the future.     

基于GPS基准网的GPS快速静态定位及动态定位方法

介绍基于GPS基准网进行GPS快速静态定位和动态定位的原理和方法。通过计算基准网改正数及其空间分布,利用内插方法求出用户站的模型误差改正数,不仅可以提高GPS整周模糊度的可靠性,而且能够大大改善GPS测量的精度。利用香港GPS基准网2001年3月的实测数据进行了解算,发现香港地区在该时间段内受强电离层活动的影响,采用常规GPS测量方法很难确定整周模糊度。利用传统的快速静态定位方法对香港GPS基准网其中一条边(9.2km) 24h的观测数据按每15min计算,模糊度确定的准确率仅为45%。采用基准网内插改正数后,仅利用L₁的观测数据模糊度确定的准确率提高到100%。点位精度平面位置由2cm提高到5mm,高程精度由4cm提高到3cm。     

动态定位自适应滤波解的性质

自适应抗差滤波具有控制观测异常及状态方程信息异常干扰的能力。着重研究自适应滤波解的性质。首先推导了动态自适应滤波与经典Kalman滤波解的解差，继而给出了状态向量估值的数学期望和均方误差，并分析了在自适应因子调控下解的偏差和均方误差的变化规律。由状态解向量的数学期望和均方误差的表达式可以看出，自适应因子能够控制状态异常对状态估值和均方误差的影响。     

Possibilities of GPS Kinematic Measurements for Geological Survey in East Slovakia

This paper deals with transformation procedures for observed GPS data from the world geodetic system WGS-84 into the national geodetic grid datum S-UTCN(system of united trigonometric cadaster network) and Baa(the Baltic Sea after adjustment).Transformation from WGS-84 into SUTCN is performed most frequently by means of the 7-element Helmert transformation with three identical points.Geodetic network was adjusted by two ways.     

RTK技术在地质勘查测量中的应用

结合RTK技术及其特点,论述了RTK直线放样功能应用于地质勘查测量中的重要性,并通过非洲工程实例,得出RTK技术具有广阔的应用前景的结论.     

预处理共轭梯度法解病态问题及在GPS中的应用

介绍测量数据处理中病态问题的岭估计思想及确定岭参数的方法。引入预处理共轭梯度法求解病态法方程组,说明算法的基本原理和它能有效减弱病态性的原因。用一个GPS差分动态定位的实例,通过与不同岭估计方法的对比分析,验证该方法是一个有效的数值迭代算法。     

卡尔曼滤波技术在伪距法动态定位中的应用探讨

本文对动态定位数据处理中应用卡尔曼滤波方法进行研究，通过模拟数据和实测数据采用自编软件进行数据处理，并对成果进行统计分析，最后，讨论了采用卡尔曼滤波方法的缺点，得出了一些有益的结论。     

Common-Reflection-Surface Stack for Converted Waves

The finite-offset (FO) common-reflection-surface (CRS) stack has been shown to be able to handle not only P-P or S-S but also arbitrarily converted reflections. It can provide different stack sections such as common-offset (CO), common-midpoint (CMP) and common-shot (CS) sections with significantly increased signal-to-noise ratio from the multi-coverage pre-stack seismic data in a data-driven way. It is our purpose in this paper to demonstrate the performance of the FO CRS stack on data involving converted waves in inhomogeneous layered media. In order to do this we apply the FO CRS stack for common-offset to a synthetic seismic data set involving P-P as well as P-S converted primary reflections. We show that the FO CRS stack yields convincing improvement of the image quality in the presence of noisy data and successfully extracts kinematic wavefield attributes useful for further analyses. The extracted emergence angle information is used to achieve a complete separation of the wavefield into its P-P and P-S wave components, given the FO CRS stacked horizontal and vertical component sections.     

Kinematic model of crustal deformation of Fenwei basin,China based on GPS observations

Using high precision GPS data for the period of 1999–2007 from the China Crustal Movement Observation Network, we have constructed a plate kinematic model of crustal deformation of Fenwei basin, China. We have examined different kinematic models that can fit the horizontal crustal deformation of the Fenwei basin using three steps of testing. The first step is to carry out unbiasedness and efficiency tests of various models. The second step is to conduct significance tests of strain parameters of the models. The third step is to examine whether strain parameters can fully represent the deformation characteristics of the 11 tectonic blocks over the Fenwei basin. Our results show that the degree of rigidity at the Ordos, Hetao, Yinshan and South China blocks is significant at the 95% confidence level, indicating the crustal deformation of these blocks can be represented by a rigid block model without the need to consider differential deformation within blocks. We have demonstrated that homogeneous strain condition is suitable for the Yinchuan basin but not for other 6 blocks. Therefore, inhomogeneous strains within blocks should be considered when establishing the crustal deformation model for these blocks. We have also tested that not all of the quadratic terms of strain parameters are needed for the Yuncheng-Linfen block. Therefore, four kinds of elastic kinematic models that can best represent the detailed deformation characteristics of the 11 blocks of Fenwei basin are finally obtained. Based on the established model, we have shown that the current tectonic strain feature of the Fenwei basin is mainly characterized by tensile strain in the NW–SE direction, and the boundaries betweem the Ganqing and Ordos blocks and the Shanxi graben possess the maximum shear strain. A comparison between our results and past geological and geophysical investigations further confirms that the model established in this paper is reasonable.