Design of Mooring System for Oil Storage Vessels

The floating oil storage system has been proposed as a new facility for Strategic Petroleum Reserve (SPR) in China. Mooring is one of the key technologies to ensure the safety, reliability, and performance of the oil storage system. This paper describes the concept, analysis, design and reliability of the mooring system. For mooring system design of these oil vessels, analysis is essential of the behavior of the vessel in connection with mooring facilities of nonlinear resilience. A nonlinear mathematical model for analyzing a moored vessel is established and solved. Some results of numerical simulations are presented. Assessment of the safety regarding the mooring system in terms of failure probability is carried out. Another simulation model for calculating the failure probability of the mooring system is proposed. The design parameters that have an influence on the characteristics of the failure probability have been identified. The simulation results show that the mooring system has an annual reliab     

八种海产硬骨鱼类消化系统的比较解剖研究

本文对硬骨类中的5个目、8科、8属、8种鱼类的消化系统作了比较解剖研究。8种鱼类均为肉食性，但由于所摄取的动物种类不同，因此8种鱼类在消化系统各部分形态结构上各具特点。消化系统各部特点是与食性及食物种类相适的。     

利用卫星遥感监测南极海冰的研究和进展

本文是根据南极“八五”国家攻关课题中的“南极海冰监测和预报”的考核目标，实现为南极考察船在 冰区中航行提供精确和清晰的冰图和预报。     

McCreary和Fickian湍扩散形式差异的分析

用矩阵方法,求解McCreary和Fickian铅垂向湍扩散形式下,无界海洋条件时在风应力和深层浮力作用下的线性解。得出不同的湍扩散系数A情况下McCreary与Fickian湍扩散形式的流场结构。指出随湍扩散系数的增加,McCreary和Fickian湍扩散形式下u分量结构及其量值差异增大。在Fickian湍扩散形式下,能量穿越密度跃层的传递能力较强。当A=0.1cm~2s~(-3)时,在风应力和深层浮力作用下两种湍扩散形式造成流场的差异很小。提出在小湍扩散系数下,用McCreary湍扩散形式研究热带海洋环流,其结果和Fickian形式应相当一致。     

动力定位系统发展状况及研究方法

动力定位系统（Dynamic Positioning System)是一种闭环的控制系统，其采用推力器来提供抵抗风、浪、流等作用在船上的环境力，从而使船尽可能地保持在海平面上要求的位置上，其定位成本不会随着水深增加而增加，并且操作也比较方便。本文对动力定位系统发展及各组成部分进行了介绍，以期对动力定位系统有个比较完整的认识。     

Coastal geomorphic evolution at the Denglou Cape, the Leizhou Peninsula

ＩＮＴＲＯＤＵＣＴＩＯＮＴｈｅＤｅｎｇｌｏｕＣａｐｅ ,ｉｎｔｈｅｓｏｕｔｈｗｅｓｔｏｆｔｈｅＬｅｉｚｈｏｕＰｅｎｉｎｓｕｌａ ,ｉｓａｔｔｈｅｎｏｒｔｈｍａｒｇｉｎｏｆｔｒｏｐｉｃａｌｚｏｎｅ .ＳｅｖｅｒａｌｒｅｓｅａｒｃｈｅｓａｎｄｃａｒｔｏｇｒａｐｈｉｅｓｏｆｔｈｅｒｅｇｉｏｎａｌｇｅｏｍｏｒｐｈｏｌｏｇｙａｎｄＱｕａｔｅｒ ｎａｒｙｇｅｏｌｏｇｙ ,ｗｈｉｃｈｗｅｒｅｃａｒｒｉｅｄｏｕｔｉｎｔｈｅｐａｓｔ,ａｌｌｉｎｃｌｕｄｅｔｈｉｓａｒｅａ (ＭＧＬ ,ＳＣＳＩＯ ,ＣＡＳ ,1 978;ＧＰＣＳＧＲＣＺＴ…     

一个基于TOPEX卫星极端海面风速预测的海洋地理信息系统

在基于 TOPEX卫星数据建立全球极端海面风速预测模型的基础上 ,开发出用于极端海面风速预测和可视化预测结果的海洋地理信息系统 (MGIS)。并论述全球极端海面风速预测的意义和 MGIS在预测过程中的重要性及必要性 ;给出全球极端海面风速预测的统计模型 ;简述极端海面风速预测海洋地理信息系统的结构、工作流程和功能 ;同时 ,对系统的预测结果进行初步分析     

Estimation of Land Subsidence Based on Groundwater Flow Model

This article presents an approach for estimating land subsidence due to withdrawal of groundwater. The proposed method calculates the groundwater seepage in 3-D-condition and calculates the land subsidence one-dimensionally. The governing equation on groundwater seepage is based on the three-dimensional mass conservation law and the principle of effective stress. The land subsidence calculation method is derived based on the following assumptions: (1) displacements occur only in the vertical direction, and (2) in vertical direction the total stresses do not change. The governing equation is solved by numerical method, i.e., finite element method (FEM) in spatial discretization and finite difference method (FDM) in time series discretization. In FEM Galerkin method is adopted and in FDM, lumped matrix method is employed. The proposed method is calibrated via analyzing 1-D consolidation problem and the results are compared with those from Terzaghi's one-dimensional consolidation theory and oedometer test. The proposed method is employed to analyze the consolidation of a soft layer due to withdrawal of groundwater from an aquifer under it. Moreover, this method is also applied to a field case of land subsidence due to groundwater pumping in a gas production field in Japan. The analytical results are compared with the field observed data. The results show that this approach simulates the field case well.     

A hierarchical real-time control architecture for a semi-autonomous underwater vehicle

This paper describes a real-time control architecture for Dual Use Semi-Autonomous Underwater Vehicle (DUSAUV), which has been developed at Korea Research Institute of Ships and Ocean Engineering (KRISO) for being a test-bed of development of underwater navigation and manipulator technologies. DUSAUV has three built-in computers, seven thrusters for six DOF motion control, one 4-function electric manipulator, one ballasting motor, built-in power source, and various sensors. A supervisor control system with GUI and a multi-purpose joystick is mounted on the surface vessel and communicates with vehicle through a fiber optic link. Furthermore, QNX, one of real-time operating system, is ported on the built-in control and navigation computers for real-time control purpose, while Microsoft OS product is ported in the supervisor computer for GUI programming convenience. A hierarchical control architecture, which consists of application layer, real-time layer and physical layer, has been developed for efficient control system of above complex underwater robotic system. The experimental results with implementation of the layered control architecture for various motion control of DUSAUV in an ocean engineering basin of KRISO is also presented.