接触交代矽卡岩型铜矿床地球化学勘查预测指标

根据接触交代矽卡岩型铜矿床的地层、岩体、控矿构造、蚀变带、矿物地质地球化学特征,结合矿床元素组合、原生异常、元素异常分带规律等,总结出矽卡岩型矿床的岩体评价、剥蚀程度、隐伏矿预测3类地球化学勘查指标,为该类矿床的勘查研究提供了科学依据.     

南岭离子吸附型稀土矿床成矿规律研究新进展

离子吸附型稀土矿是我国的优势资源,是全球重稀土的主要来源。20世纪80年代我国对此类矿床的成矿规律开展过大量研究,但仍有诸多未解之谜。为了解目前离子吸附型稀土资源的分布特征和成矿规律,2011~2015年中国地质科学院矿产资源所三稀项目组对52个离子吸附型稀土矿床进行了综合研究,本文介绍稀土成矿规律研究方面取得的一些新进展:(1)离子吸附型稀土矿床广泛分布在华南地区,以南岭最为发育,近些年在越南、老挝、泰国及美国也有发现。矿床主要产在花岗岩和酸性火山岩风化壳中,近几年也在变质岩和灰岩风化壳中有所发现,但花岗岩离子吸附型稀土矿床规模较大,品位较高,仍是最为重要的一类(亚类)稀土矿床;(2)成矿花岗岩的形成时代范围较宽,锆石U-Pb年龄集中在461~384Ma、228~242Ma和189~94Ma三个区间。相对于LREE型成矿花岗岩,HREE型更加富硅,富HREE,具有强烈的负Eu异常,普遍高Rb,低Ti、Zr、Hf、Nb、Ta、Ba、Sr等微量元素,暗示HREE型成矿花岗岩岩浆经历了高度分异。值得注意的是,部分LREE型成矿花岗岩相对富集HREE,特别是富集Y,轻重稀土元素比值(LREE/HREE)多介于1~3之间,风化易形成HREE型风化壳,这很可能是今后重稀土资源的重要来源之一;(3)成矿花岗岩中稀土矿物的成因多样,有岩浆成因(如榍石、褐帘石、独居石、磷钇矿等)、流体交代成因(稀土氟碳酸盐类)和表生成因(水磷铈矿、水磷镧矿等),稀土元素的内生矿化很大程度上受流体交代作用影响;(4)发育完整的风化壳垂向剖面中稀土元素含量呈"弓背式"分布,即表土层和半风化层中含量低,全风化层中含量高,但受地形、地貌及地表水等因素的影响,稀土含量变化曲线呈多种形态。垂向上LREE和HREE可分层富集,即全风化层上部富集LREE,下部富集HREE,也可以同时富集在全风化层下部。华南大量成矿母岩和风化壳样品的化学风化蚀变指数(CIA)与稀土元素总量(∑REE)之间存在明显的相关性,当CIA85%时,CIA与∑REE呈正相关,当85%CIA100%时,CIA与∑REE呈负相关;(5)表生过程中,母岩中易风化的稀土矿物不断释放出可交换性吸附态的稀土元素,酸性淋滤作用是稀土元素迁移的动力,黏土矿物是稀土元素赋存的载体,风化程度影响稀土元素的次生富集。     

皖南中生代高钾钙碱性埃达克岩地球化学特征及岩石成因

皖南晚侏罗世-早白垩世早期酸性岩浆岩产于扬子陆块江南古隆起东段,岩体类型为花岗闪长岩,主矿物组合为斜长石+石英+钾长石+角闪石±黑云母,副矿物有磷灰石、锆石、榍石、磁铁矿、钛铁矿.岩石主量元素含量(%)具有高SiO2、Al2O3、K2O/Na2O,低TiO2、MgO、CaO、P2O5的特征,A/CNK≈1.06,σ≈1.97,为弱过铝钙碱性系列.稀土元素表现为LREE富集,HREE亏损,具弱的负Eu异常,元素Y和Yb(×10-6)含量低,但具有较高的Sr/Y和(La/Yb)N比值:微量元素表现为富集LILE(Rb、La、Ba、Sr)和亏损HFSE(Nb、Ta、Zr、Y),(87Sr/86Sr)1>0.704,εNd<0.通过岩石学及地球化学特征分析,认为皖南晚侏罗世-早白垩世早期酸性岩浆岩为"C"型、高钾钙碱性埃达克岩.晚侏罗世-早白垩世早期,皖南地区大地构造环境处于由挤压到伸展的转折时期,埃达克岩浆来源于印支期加厚的下地壳受地幔物质上涌影响而拆层熔融形成.皖南埃达克岩的发现,可为该地区寻找与之有密切成因联系的Au、Ag、Ho及斑岩铜矿等提供理论依据.     

甘肃省岷县寨上地区古风化壳形成与成矿作用初探

文中探讨了寨上地区古风化壳形成机理和演化过程,认为在寨上矿区第三系地层以下存在古风化壳,寨上矿区王足路一带16、29、23号矿体头部的风化壳内的氧化铁帽型金矿为风化壳型金矿床（类红土型金矿）。     

Five-Stage Model of the Palaeozoic Crustal Evolution in Xinjiang

The great majority of the Palaeozoic orogenjc belts of Central Asia are of the intercontinental type, whose evolution always follows a five-stage model, i.e. the basal continental crust-extensional transitional crust-oceanic crust-convergent transitional crust-new continental crust model. The stage for the extensional transitional crust is a pretty long, independent and inevitable phase. The dismembering mechanism of the basal continental crust becoming an extensional continental crust is delineated by the simple shear model put forward by Wernike (1981). The continental margins on the sides of a gently dipping detachment zone and moving along it are asymmetric: one side is of the nonmagmatic type and the other of the magmatic type with a typical bimodal volcanic formation. In the latter case, however, they were often confused with island arcs. This paper discusses the five-stage process of the crustal evolution of some typical orogenic belts in Xinjiang.     

矿物成因族的演化及其地质找矿信息

基于对胶东、晋北寒武纪变质岩系、超基性岩、基性岩、花岗岩类、火山岩类、硅铁建造铁矿、金矿蚀变带内 1 1个不同地质产状的 34个角闪石、 2 51个绿泥石、 60个黑云母单矿物的提纯 ,矿物的共生组合、物理性质、化学成分、X光衍射分析、热分析、红外吸收光谱分析、双矿物地质温度计、矿物压力计的测定 ,提出了角闪石、绿泥石、黑云母矿物成因族的地壳物质演化、成岩成矿作用、变质岩原岩恢复、地层对比、变质相、蚀变带的演化规律和地质找矿信息。     

Crustal transect from the North Atlantic Knipovich Ridge to the Svalbard Margin west of Hornsund

The crustal structure along a 312 km transect, stretching from the axial mountains of the North Atlantic Knipovich Ridge to the continental shelf of Svalbard, has been obtained using seismic reflection data and wide angle OBS data. The resulting seismic V_p and V_s models are further constrained by a 2-D-gravity model. The principal objective of this study is to describe and resolve the physical and compositional properties of the crust in order to understand the processes and creation of oceanic crust in this extremely slow-spreading counterpart of the North Atlantic Ridge Systems. V_p is estimated to be 3.50–6.05 km/s for the upper oceanic crust (oceanic layer 2), with a marked increase away from the ridge. The measured V_p of 6.55–6.95 km/s for oceanic layer 3A and 7.10–7.25 km/s for layer 3B, both with a V_p/V_s ratio of 1.81, except for slightly higher values at the ridge axis, does not allow a clear distinction between gabbro and mantle-derived peridotite (10–40% serpentized). The thickness of the oceanic crust varies a lot along the transect from the minimum of 5.6 km to a maximum of 8.1 km. The mean thickness of 6.7 km for the oceanic crust is well above the average thickness for slow-spreading ridges (<10 mm/year half-spreading rate). The areas of increased thickness could be explained by large magma production-rates found in the zones of axial highs at the ridge axis, which also have generated the off-axial highs adjacent the ridge. We suggest that these axial and off-axial highs along the ridge control the lithological composition of the oceanic crust. This approach suggests normal gabbroic oceanic crust to be found in the areas bound by the active magma segments (the axial and off-axial highs) and mantle-derived peridotite outside these zone.     

Strength and stability of frictional sliding of gabbro gouge at elevated temperatures

To investigate the strength of frictional sliding and stability of mafic lower crust, we conducted experiments on oven-dried gabbro gouge of 1 mm thick sandwiched between country rock pieces (with gouge inclined 35° to the sample axis) at slip rates of 1.22 × 10^− 3 mm/s and 1.22 × 10^− 4 mm/s and elevated temperatures up to 615 °C. Special attention has been paid to whether transition from velocity weakening to velocity strengthening occurs due to the elevation of temperature.Two series of experiments were conducted with normal stresses of 200 MPa and 300 MPa, respectively. For both normal stresses, the friction strengths are comparable at least up to 510 °C, with no significant weakening effect of increasing temperature. Comparison of our results with Byerlee's rule on a strike slip fault with a specific temperature profile in the Zhangbei region of North China shows that the strength given by experiments are around that given by Byerlee's rule and a little greater in the high temperature range.At 200 MPa normal stress, the steady-state rate dependence a − b shows only positive values, probably still in the “run-in” process where velocity strengthening is a common feature. With a normal stress of 300 MPa, the values of steady-state rate dependence decreases systematically with increasing temperature, and stick-slip occurred at 615 °C. Considering the limited displacement, limited normal stress applied and the effect of normal stress for the temperatures above 420 °C, it is inferred here that velocity weakening may be the typical behaviour at higher normal stress for temperature above 420 °C and at least up to 615 °C, which covers most of the temperature range in the lower crust of geologically stable continental interior. For a dry mafic lower crust in cool continental interiors where frictional sliding prevails over plastic flow, unstable slip nucleation may occur to generate earthquakes.     

造盆作用及成矿盆地的历史动力综合分类建议

本文把历史分析方法与动力分析方法两种分折方法结合起来,提出了一个综合的盆地分类方案。按历史动力综合分类,造盆作用及盆地可划分为三大类:大洋壳型、雏陆壳(过渡壳)型及大陆壳型大壳型中可细分为活动区型及稳定区型。雏陆壳型包括前地槽型及地槽前期型。大陆壳型中计有地槽后期型、地台型和地洼型。