各国地壳上地幔深地震反射研究计划与进展

当前世界上采用的深部探测地球物理技术主要是地震学方法，七十年代以来，美、英、法、德、加拿大、澳大利亚等发达国家相继开展了各自的深地震反射研究计划ＣＯＣＯＲＰ、ＢＩＲＰＳ、ＥＣＯＲＳ、ＤＥＫＯＲＰ、ＬＩＴＨＯＰＲＯＢＥ＆ＡＣＯＲＰ。共完成深地震反射测线４万公里左右，获得了岩石圈的形成与演化，地球动力学过程，及地球深部构造等方面重要信息，从八十年代开始，我国在不同构造带上实施了１５００公里左右的深地震     

Attenuation differences in layer 2A in intermediate- and slow-spreading oceanic crust

In situ seismic attenuationQ⁻¹logs are derived from borehole velocity profiles and reveal sharp boundaries between morphologies of the extrusive volcanic layers in intermediate- and slow-spreading oceanic crust.Q⁻¹logs are calculated from the scattering attenuation associated with vertical velocity heterogeneity in Ocean Drilling Program Holes 504B and 896A and in Hole 395A, located in 5.9–7.3 Ma crust on the Pacific and Atlantic plates, respectively. Our results strongly tie crustal properties to seismic measurables and observed geological structures: we find that the scattering attenuation can be used to identify the extrusive volcanic sequence because it is closely related to changes in the degree of vertical heterogeneity. We interpret a distinct decrease in the Q⁻¹log at the transition below the extrusive volcanic layer to correspond with the seismic layer 2A/2B boundary. The boundary is located at 465 m depth below the sea floor in both Hole 395A and 504B, although this is likely to be a coincidence of the sediment thickness at these sites. Layer 2A is estimated to be approximately 150 m thick in Hole 504B and > 300 m thick in Hole 395A. Cyclic sequences of high-porosity pillows and low-porosity massive units in the uppermost 100 m of volcanics in Hole 395A result in large velocity heterogeneities which cause > 5 times more attenuation in this layer than in Hole 504B. In Hole 896A, by contrast, fewer pillows, more massive flows, and a greater volume of carbonate veins decrease the velocity heterogeneity and attenuation significantly over only 1 km distance from Hole 504B. We conclude that the attenuation in the extrusive volcanics of the ocean crust is largely controlled by variation in local heterogeneity and morphology as well as by subsequent hydrothermal alteration. The observed differences inQ⁻¹profiles and layer 2A thickness at these sites may be attributed to variations in the volume and duration of volcanic activity at mid-ocean spreading centers for these Pacific and Atlantic ridge segments.     

Do CRISTA Experiment/Campaign Data Represent a Typical Situation or Not?

Data from four A3 radio wave circuits in central Europe are used to analyse the representativeness of the ionization and gravity wave activity pattern in the lower ionosphere (85 – 100 km) in the CRISTA experiment interval (3 – 12 November 1994) for the given conditions. It has been found that the CRISTA experiment interval was run under conditions, which are highly representative both of October – November 1994 and autumn, low-moderate solar activity, the descending phase of solar cycle conditions, i.e. CRISTA measurements may be considered to provide values identical with, or close to climatological values (at least for central Europe, h = 85 – 100 km).     

富营养化浅水湖泊沉水水生植被的衰退与恢复

对国外近年来有关富营养化浅水湖泊的退化与恢复方面的研究进展以及生物操纵作用作了述评,对有关富营养化湖泊沉水植被衰退的有代表性的３种假说也作了介绍。根据“八五”期间武汉东湖水生植被重建的研究工作和多年积累的湖泊水生植被调查资料,提出了长江中下游浅湖富营养化过程中沉水植被演替的模式。     

An analysis of soil crust strength in relation to potential abrasion by saltating particles

Wind erosion depends on the ease with which particles can be detached from the soil surface, but suitable tests to characterize this property are not available. Two possible methods to determine surface soil strength in the field were therefore compared on a range of artificially ‘crusted’ surfaces. These were made by spraying or tension wetting aggregates (10–2, 2–0.5 and <0.5 mm) from a structurally unstable sandy loam, followed by drying. Each test involved measuring the force exerted on a probe driven at a steady rate into the surface, using either a flat-tipped 0.6 mm diameter penetrometer or a flat-ended cylindrical punch with inner and outer diameters of 5 and 6 mm, respectively. Both probes showed that crusts could be produced reproducibly. Depending on the probe and aggregate size, penetration mainly occurred either as a result of aggregates being deflected out of the pathway of the probe or by genuine rupture of aggregates or of the crusted surface. The penetrometer, because it was comparable to the size of sand grains, gave results that can be used to characterize surface erodibility to saltating particles. The punch gave results that would be unsuitable for this purpose, as would other strength tests that are on too large a scale. Penetrometer results were analyzed to calculate the energy required for penetration. It was thus possible to demonstrate that only the spray-wetted fine aggregates had a surface that could undergo large-scale rupture by saltating sand grains. For all other surfaces, saltating particles would be unable to supply sufficient energy to rupture aggregates or the crusted surface. Erosion could only occur by a slower process of abrasion in which smaller particles or aggregates are chipped away from the surface. However, it is shown that saltating particles could rupture the interaggregate bonding in the 2–0.5 mm aggregate surfaces, thus permitting creep. An alternative and potentially simpler way of characterizing surface erodibility by using a surface modulus of elasticity is also discussed. Our results demonstrate that the small diameter penetrometer is a promising technique for characterizing erodibility of aggregated and crusted surfaces. © 1997 by John Wiley & Sons, Ltd.     

地震研究新方法——洋壳流理论简介

根据交换平衡力学原理[1],简要地介绍了洋壳流的概念及其运动特点。根据运行区域和方向的不同,把三大洋的海底扩张运动划分为不同的洋壳流,并绘出运行路线图。提出洋壳流运动方向、路线及力作用大小的判断方法,通过不同区域洋壳流相互力作用的对比,分析海底扩张运动对地震时空分布及变化规律的影响。     

Regionality of deep low-frequency earthquakes associated with subduction of the Philippine Sea plate along the Nankai Trough, southwest Japan

The Fukuoka District Meteorological Observatory recently logged three possible deep low-frequency earthquakes (LFEs) beneath eastern Kyushu, Japan, a region in which LFEs and low-frequency tremors have never before been identified. To assess these data, we analyzed band-pass filtered velocity seismograms and relocated LFEs and regular earthquakes using the double-difference method. The results strongly suggest that the three events were authentic LFEs, each at a depth of about 50 km. We also performed relocation analysis on LFEs recorded beneath the Kii Peninsula and found that these LFEs occurred near the northwest-dipping plate interface at depths of approximately 29–38 km. These results indicate that LFEs in southwest Japan occur near the upper surface of the subducting Philippine Sea (PHS) plate. To investigate the origin of regional differences in the occurrence frequency of LFEs in western Shikoku, the Kii Peninsula, and eastern Kyushu, we calculated temperature distributions associated with PHS plate subduction. Then, using the calculated thermal structures and a phase diagram of water dehydration for oceanic basalt, the water dehydration rate (wt.%/km), which was newly defined in this study, was determined to be 0.19, 0.12, and 0.08 in western Shikoku, the Kii Peninsula, and eastern Kyushu, respectively; that is, the region beneath eastern Kyushu has the lowest water dehydration rate value. Considering that the Kyushu–Palau Ridge that is subducting beneath eastern Kyushu is composed of tonalite, which is low in hydrous minerals, this finding suggests that the regionality may be related to the amount of water dehydration associated with subduction of the PHS plate and/or differences in LFE depths. Notable dehydration reactions take place beneath western Shikoku and the Kii Peninsula, where the depth ranges for dehydration estimated by thermal modeling agree well with those for the relocated LFEs. The temperature range in which LFEs occur in these regions is estimated to be 400–500 °C.     

Stretching characteristics and its dynamic significance of the northern continental margin of South China Sea

To investigate the thinning of the whole crust, and the contribution of the upper versus lower crust to the stretching since Cenozoic, we calculated the stretching factor of the northern margin of South China Sea with data such as whole crustal thickness, depth of Cenozoic sedimentary basement and the horizontal displacement of faults. An isometric line drawing on whole crustal stretching factor is then obtained. Along the seismic Line 1530 in Baiyun sag, we also calculated the stretching factors of the upper and lower crust. The results suggest that the whole crustal thickness decreases seaward while the whole crustal stretching factor increases from shelf to slope. The Moho upwells highest beneath where the crust is thinned most. The value of the whole crustal stretching factor ranges from 1.5 to 6. Two areas were thinned intensely: the center of Yinggehai Basin, and the Baiyun sag in the Pearl River Mouth Basin. The calculation of the upper and lower crustal stretching factors from DSP1530 in Baiyun sag shows that the original crust of Baiyun sag should be thinned before deformation. Its pre-Cenozoic evolution as well as tectonic position during Cenozoic might be responsible for that.     

华北及邻区地壳上地幔三维速度结构的地震走时层析成像

利用华北及邻区475个地震台站的区域地震走时资料,反演了该地区的地壳上地幔三维P波和S波速度结构。地震走时的计算用近似弯曲射线追踪方法,三维速度模型的反演用LSQR算法。用检测板方法对走时数据进行成像分辨率分析,结果表明反演模型在水平方向上以0.5°×0.5°的节点分布,垂直方向上以1km、10km、25km、42km、60km为节点作网格划分是合理的。研究区域内,秦岭—大别造山带两侧的华北块体与扬子块体有不同的速度异常特征：华北块体地壳速度结构复杂,而扬子块体则相对简单。华北块体地壳内存在较明显的低速异常,而扬子块体则正常或高速异常。自中新生代以来华北块体地壳经历挤压到伸展的强烈变形,而扬子块体相对稳定。华北块体的构造活动依然强烈,表现为频繁的地震活动。华北地块地壳速度结构的主要特征是：①主要构造带（如燕山构造带、太行山山前构造带、汾渭构造带、郯庐断裂带以及秦岭-大别构造带）位于地壳上地幔的低速或高低速过渡区内;②在唐山及附近地区25 km、42 km和60 km深处连续的低速异常,可能意味着上地幔热的物质上涌,到达上地壳的下部后停止上升过程。     

S-wave crustal and upper mantle's velocity structure in the eastern Tibetan Plateau——Deep environment of lower crustal flow

A teleseismic profile consisting of 26 stations was deployed along 30°N latitude in the eastern Tibetan Plateau. By use of the inversion of P-wave receiver function, the S-wave velocity structures at depth from surface to 80 km beneath the profile have been determined. The inversion results reveal that there is significant lateral variation of the crustal structure between the tectonic blocks on the profile. From Linzhi north of the eastern Himalayan Syntaxis, the crust is gradually thickened in NE direction; the crustal thickness reaches to the maximum value (~72 km) at the Bangong-Nujiang suture, and then decreased to 65 km in the Qiangtang block, to 57―64 km in the Bayan Har block, and to 40―45 km in the Sichuan Basin. The eastern segment of the teleseismic profile (to the east of Batang) coincides geographically with the Zhubalong-Zizhong deep seismic sounding profile carried out in 2000, and the S-wave velocity structure determined from receiver functions is consistent with the P-wave velocity structure obtained by deep seismic sounding in respect of the depths of Moho and major crustal interfaces. In the Qiangtang and the Bayan Har blocks, the lower velocity layer is widespread in the lower crust (at depth of 30―60 km) along the profile, while there is a normal velocity distribution in lower crust in the Sichuan Basin. On an average, the crustal velocity ratio (Poisson ratio) in tectonic blocks on the profile is 1.73 (σ = 0.247) in the Lhasa block, 1.78 (σ = 0.269) in the Banggong-Nujiang suture, 1.80 (σ = 0.275) in the Qiangtang block, 1.86 (σ = 0.294) in the Bayan Har blocks, and 1.77 (σ = 0.265) in the Yangtze block, respectively. The Qiangtang and the Bayan Har blocks are characterized by lower S-wave velocity anomaly in lower crust, complicated Moho transition, and higher crustal Poisson ratio, indicating that there is a hot and weak medium in lower crust. These are considered as the deep environment of lower crustal flow in the eastern Tibetan Plateau. Flowage of the ductile material in lower crust may be attributable to the variation of the gravitational potential energy in upper crust from higher on the plateau to lower off plateau.