航空物探平剖图自动绘制的可视化处理

简要介绍了航空物探平面剖面图的自动绘制方法,给出了绘制中对一些问题的处理方法;重点介绍了彩色渐变填充着色、彩色渐变渲染着色等几种可视化处理方法,并提出了着色中渐变度、透明度概念及应用方法。     

经历剪切变形历史的岩石节理表面粗糙特性分析

基于两类岩石节理剪切试验，采用非接触式激光测距仪，实测了剪切前后节理表面粗糙数据，统计分析了岩石节理表面粗糙特性的三维粗糙参数的物理含义，并将这些参数与相应的二维参数进行了充分比较。结果表明，三维参数与二维参数间存在的近似线性关系，而多个三维参数相对比单一的二维参数更全面有效地描述了节理表面粗糙特性。     

昌马水库右岸山体稳定性研究

昌马水库导流排砂洞塌方导致右岸山体发生松动 ,本文在大量地质资料的基础上 ,对右岸岩体裂隙网络进行模拟 ,同时 ,采用极限分析能量法和有限元数值模拟方法等对右岸山体的稳定性进行分析研究 ,并提出相应的加固方案。     

Thermo-mechanical structure beneath the young orogenic belt of Taiwan

We investigate the thermo-mechanical properties beneath the young orogenic belt of Taiwan by constructing a shear strength profile from a vertical stratified rheological structure. The stratified rheological structure is estimated based on the recently developed thermal structure and its likely composition. Subduction–collision in the young orogenic belts and the thick accretionary wedge make a significant contribution to the growth of sialic crust in the hinterland. The sialic bulk crust not only results in a low seismic velocity but also produces weak crust in the hinterland. The earthquake depth–frequency distribution in the foreland and hinterland correlates very well with the regimes of the brittle/ductile transition revealed in the strength profile. Our results show that the observed two-layer seismicity in the foreland is due to a moderate geotherm and an intermediate mafic bulk composition; while single-layer seismicity in the hinterland is due to its felsic bulk composition. In the foreland, the mechanically strong crust (MSC) and the mechanically strong lithosphere (MSL) coincide with frequent seismicity. The shallow MSC in the hinterland is consistent with the 20- to 25-km seismicity occurring there. The total lithospheric integrated strength (LIS) in the hinterland is only about half of that in the foreland, suggesting a weak lower crust and lithosphere mantle in the hinterland. The results confirm that the earthquake cutoff depth is a proxy for temperature. The calculated decrease of effective elastic thickness (EET) from the orogenic margin (foreland) to the center (hinterland) is consistent with the results of flexure modeling in most orogenic belts. Due to the weak LIS in the hinterland, crustal thinning and rifting may occur in the future. Our results, thus, suggest that the mechanical structure is also closely related to the composition and is not directly reflected in the thermal structure.     

基于物方影像匹配和概率松弛的断面自动提取

提出了基于物方影像匹配的断面提取,为了提高匹配的可靠性,引入了概率松弛法,最终获得了高精度的断面.     

Anabranching in mixed bedrock-alluvial rivers: the example of the Orange River above Augrabies Falls, Northern Cape Province, South Africa

Anabranching is characteristic of a number of rivers in diverse environmental settings worldwide, but has only infrequently been described from bedrock-influenced rivers. A prime example of a mixed bedrock-alluvial anabranching river is provided by a 150-km long reach of the Orange River above Augrabies Falls, Northern Cape Province, South Africa. Here, the perennial Orange flows through arid terrain consisting mainly of Precambrian granites and gneisses, and the river has preferentially eroded bedrock joints, fractures and foliations to form multiple channels which divide around numerous, large (up to 15 km long and 2 km wide), stable islands formed of alluvium and/or bedrock. Significant local variations in channel-bed gradient occur along the river, which strongly control anabranching style through an influence on local sediment budgets. In relatively long (>10 km), lower gradient reaches (<0.0013) within the anabranching reach, sediment supply exceeds local transport capacity, bedrock usually only crops out in channel beds, and channels divide around alluvial islands which are formed by accretion in the lee of bedrock outcrop or at the junction with ephemeral tributaries. Riparian vegetation probably plays a key role in the survival and growth of these islands by increasing flow roughness, inducing deposition, and stabilising the sediments. Less commonly, channels may form by eroding into once-continuous island or floodplain surfaces. In shorter (<10 km), higher gradient reaches (>0.0013) within the anabranching reach, local transport capacity exceeds sediment supply, bedrock crops out extensively, and channels flow over an irregular bedrock pavement or divide around rocky islands. Channel incision into bedrock probably occurs mainly by abrasion, with the general absence of boulder bedforms suggesting that hydraulic plucking is relatively unimportant in this setting. Mixed bedrock-alluvial anabranching also occurs in a number of other rivers worldwide, and appears to be a stable and often long-lived river pattern adjusted to a number of factors commonly acting in combination: (1) jointed/fractured granitoid rock outcrop; (2) erosion-resistant banks and islands; (3) locally variable channel-bed gradients; (4) variable flow regimes.     

Distribution of trace metals in the Odra River system: Water–suspended matter–sediments

Extensive investigations of trace metals concentrations in water, suspended particulate matter (SPM) and bottom sediments of the whole Odra River system were carried out over the years 1997–2000. The vertical distribution of selected metals and their mobility were also studied in the sediment cores from upper and middle river sections. Significant levels of metal contamination were found. Median concentrations (Cd, Pb, Cu, Zn and As) in the SPM and sediments were (mg kg⁻¹) 7.1 and 8.9 Cd, 128 and 146 Pb, 81 and 119 Cu, 1198 and 1204 Zn, 48 and 54 As, respectively. The highest metal pollution of the Odra River solids was found with cadmium, zinc, lead and arsenic, showing high similarity in their frequency distributions in both SPM and sediments. Cd, Zn and As appear to be of particular concern because of the high levels, that appear to be bioavailable, and their high mobility. The exchangeable and carbonate chemical forms of Cd and Zn reached up to 50% of their total amount. Besides the determination of total metal concentration, the metal chemical forms in river solids were investigated. The results of very wide studies of the Odra River system through 4 years suggest that metal pollution decreased, especially for Zn, Pb and Cu. Among all metals studied in the Odra River sediments, substantial reductions of Cd contamination were observed neither in the period after ’97 flood, nor if compared with the earlier results obtained before ’97. No essential differences of the metal contents were observed among the samples for the same river compartment, from the same locality, taken within the five sampling campaigns. The pattern of spatial and vertical metal distributions in the river solids indicates that a variety of sources might be responsible for the contamination; very intensive, historical and current mining and smelting activities probably are the most important ones.     

Saprolite Remnants as Indicators of Pre-Glacial Landform Genesis in Southeast Sweden

Twenty‐six sites with remnants of gravelly saprolites (grus) have been located in southeast Sweden. Joint block hills (castle kopjes) and steep rock walls with weathered joints as well as rounded boulders are documented to have an origin in deep weathering and subsequent stripping of saprolites. The saprolite remnants and landforms result from the fragmentation of the re‐exposed sub‐Cambrian peneplain along fracture systems. Only shallow saprolites occur on the elevated intact parts of the sub‐Cambrian peneplain, while saprolites up to 20 m thick are encountered in areas where the sub‐Cambrian peneplain is fractured and dissected. Neogene uplift with reactivation of the weathering system is thought to be the main cause of saprolite formation. Deep weathering is thus judged to have been the major agent of landform formation in the study area, while glacial and glaciofluvial erosion has contributed mainly by stripping saprolites, detaching corestones, and plucking joint blocks along weathered joints.     

Causes for continuous siltation of the lower Yellow River

Previous studies indicate that aggradation of a river channel is caused by upriver and/or downriver controls, but the evaluation of their relative importance is often difficult. A method is proposed to isolate the effect of the downriver control based on the slopes of the existing river profile, those of the graded profile estimated from the discharge-sediment relationship and slope reduction due to local base-level rise. The method was applied to the rapidly aggrading lower Yellow River. The downriver control in this case refers to the local base-level rise associated with deltaic extension during the period under discussion. The result shows that the main portion of siltation along the river is not caused by downriver control but by the slope difference between the existing and the graded profiles over a period within the last 700 years, assuming conditions of discharge and sediment load during the period from 1962 to 1985 are reflective of the long term. The marked slope difference between the existing and the graded profiles of the river is a result of changes in the river environment in the past several thousand years including the increase of sediment load, local base-level rise associated with river lengthening by deltaic growth, and relative sea-level rise due to tectonic subsidence of the coastal alluvial plain.