大别造山带上部地壳结构的有限差分层析成像

将有限差分层析反演方法用于大别造山带人工地震测深剖面上部地壳初至波的走时层析成像，得到这一剖面上部地壳横向不均匀结构图像表明，在南大别地区的超高压变质带发现榴辉岩相岩石，其下方3km深度以内的基底仍具有大陆地壳构造中正常的结晶基底速度（6．00km／s左右）；北大别地区在整个上地壳保持正常的速度，而在超高压带下方3km深度以下为6．20-630km／s的相对高速异常区，这一现象可能与超高压变质岩的含量增大有关．同时还表明，南大别和北大别之间至少在上地壳已有明显差异，它们之间的水吼一五河断裂可能是大别造山带内部的主要构造分界线．     

利用黄土剖面的古土壤年龄研究毛毛山断裂的滑动速率

利用１４Ｃ、热释光（ＴＬ）样品年代及扩散方程计算结果，结合区域黄土剖面中古土壤年龄，对毛毛山地区晚第四纪各级地貌年龄进行了对比研究。根据毛毛山活动断裂水平位移和垂直位移分布明显的分组特征，求得毛毛山断裂带不同段落不同时段的平均滑动速率。大约自中更新世晚期以来，毛毛山断裂走滑段的平均水平滑动速率为２．３～３．９ｍｍ／ａ，垂直滑动速率为０．０７～０．１９ｍｍ／ａ；天祝盆地倾滑段垂直滑动速率为０．１１～０．８６ｍｍ／ａ。沿断裂带滑动速率具明显的非均匀性特点，表现为自东向西水平位移具累积滑动亏损特征，垂直位移则具补偿性     

秦岭巴山地区高陵─达县重磁剖面初步解释

高陵－达县剖面位于秦岭中段，斜跨中朝准地台、秦岭褶皱系、扬子准地台三大构造单元。在研究剖面实磁场特征的基础上，综合地质、物性、省内及邻省深部物探资料，建立了剖面地质－地球物理模型，依此对剖面通过地段的地壳结构、断裂带深部特征、三大构造单元的深部格架进行了解释推断。     

茅台酒酿酒高梁的地质环境研究

茅台酒对酿酒高梁有严格要求，适于茅台酒传统酿造工艺的高梁只产于仁怀县的某些地区，主要是受地质环境的控制。仁怀高梁对某些常量和微量元素有着鲜明的选择性，对磷和钼表现出强烈的吸收作用。岩－土剖面元素的迁聚，对磷和铝的供应是确定仁怀高梁品质和产量的关键。侏罗系砂泥岩、二叠系煤系地层的岩－土剖面，元素淋溶微弱，总量丰富，有效态含量高，组合良好，能正常进行岩－土－高梁系统的物质转化与元素迁移，能充分供应高梁生长所需的磷和钼等元素，是茅台酒酿酒高梁的最宜种植区。     

应力波与可滑移岩石界面间的相互作用研究

研究了应力波与用节理刚度系数描述的线性滑移岩石界面间的相互作用，给出了其透、反射波幅的一般表达式。通过应力波垂直人射界面时的具体分析，反映出岩石界面的节理刚度对应力波传播的重要影响，并揭示了岩石界面对应力波的高频滤波作用。     

瑶沟等地区勘查金矿的放射性和非放射性气体地球化学方法的研究

本文介绍了瑶沟等地区勘查金矿的放射性和非放射性气体地球化学方法的研究成果：基本查明了应用本方法勘查金矿的主要条件是金矿中伴生有足够的Ｕ，Ｈｇ和碳酸盐矿物；研制成了壤中气（Ｒｎ－ＣＯ２）联测技术，提高了测量质量和探测深部矿体的能力；利用壤中气（Ｒｎ－ＣＯ２）异常进行了成矿预测，并已获得成功。     

The identifiability of parameters in a water quality model of the Biebrza River, Poland

The identifiability of model parameters of a steady state water quality model of the Biebrza River and the resulting variation in model results was examined by applying the Monte Carlo method which combines calibration, identifiability analysis, uncertainty analysis, and sensitivity analysis. The water quality model simulates the steady state concentration profiles of chloride, phosphate, ammonium, and nitrate as a function of distance along a river. The water quality model with the best combination of parameter values simulates the observed concentrations very well. However, the range of possible modelled concentrations obtained for other more or less equally eligible combinations of parameter values is rather wide. This range in model outcomes reflects possible errors in the model parameters. Discrepancies between the range in model outcomes and the validation data set are only caused by errors in model structure, or (measurement) errors in boundary conditions or input variables. In this sense the validation procedure is a test of model capability, where the effects of calibration errors are filtered out. It is concluded that, despite some slight deviations between model outcome and observations, the model is successful in simulating the spatial pattern of nutrient concentrations in the Biebrza River.     

Crustal structure of Dabieshan orogenic belt

The crustal structures ofP velocity and density on the deep seismic sounding profile across the Ilabieshan orogenic belt are presented. There is a 5-km-thick crustal “root” between the Yuexi and Xiaotian where the elevation is highest on the profile. An apparent Moho offset of 4. 5 km beneath the Xiaotian-Mozitan fault marks the paleo-suture of the Triassic collision. A high-velocity anomaly zone at the depth below 3 km beneath the ultra-high pressure (UHP) zone may be correlated to the higher content of UHP metamorphic rocks. Project supported by the National Natural Science Foundation of China and the Joint Earthquake Science Foundation.     

综合物探方法在汤上屯地热勘探中的应用研究

本文通过联剖、电测深、磁法和测温法等综合工作成果,分析、推断出汤上屯热水构造的产状、性质和热水出露条件,圈定出了热水分布范围.     

Development of joints and shear fractures in the Kuqa depression and its implication to regional stress field switching

The superimposed basin must have undergone the changes of regional stress field. Study on the nature and switch of regional stress field of superimposed basin is very useful to understanding its stress state and tectonic events during its formation and evolution. As sensitive markers of small stress changes, joint and shear fracture, characterized by consistency of orientation over wide area, can be used to reconstruct paleostress state and its evolution. Detailed observations and analysis on the orientations, geometrical patterns, sequences of joints and shear fractures and their chronological relation to faults and folds show that, the NEE-SWW systematic joints and NNW-SSE systematic joints developed in the Mesozoic and Cenozoic strata are much more prominent than NW-SE systematic joints and shear fractures with different orientations. And the NWW-SEE and NW-SE systematic joints formed later than NEE-SWW systematic joints but earlier than shear fractures with different orientations. According to the relationships between joint and shear fractures and stress, the NEE-SWW systematic joints are inferred to result from lateral weak extension caused by the late Cretaceous regional uplift, while the NNW-SSE and NW-SE systematic joints are interpreted as syn-tectonic deformation relating to strong N-S compression in the Neogene. But some conjugate shear fractures occur probably due to sinistral strike-slip faulting in the Kuqa depression. At the beginning of the Neogene, the stress field changed and the maximal principal stress σ1 switched from vertical to horizontal.