Seasonal variations in river discharge and nutrient export to a Northeastern Pacific estuary

Seasonal variations in dissolved nitrogen and silica loadings were related to seasonal variability in river discharge. Dissolved nutrient concentrations measured weekly at three stations in the Yaquina River, Oregon from 1999 through 2001, and then monthly in 2002 were used as the basis for developing a nutrient loading regression as part of a larger agency program for evaluating nutrient processes. Because realistic models of nutrient transport require dense data sets to capture both long and short term fluctuations in nutrient concentrations, data at one freshwater station also were collected hourly for the same years using an in-stream monitor.The effects of storm events on dissolved nutrient transport were examined during three storms, including one in a high rainfall-discharge year, and two in average years, one of which followed a drought year. During the drought year (WY2001), total dissolved nitrate input was considerably less than in wetter years. Dissolved nitrate concentrations, however, were unusually high in the first winter storm runoff after the drought. The freshwater dissolved nitrate nitrogen loads varied from 40,380 kg day⁻¹ during a high-flow storm event to 0.11 kg day⁻¹ during late summer, low flow conditions. Dissolved silica dynamics differed from those of nitrate because during storm events, silica concentrations in the Yaquina River decreased to near zero at the storm height, probably due to dilution by near surface or overland flow, and later recovered.During the time interval studied, over 94% of the dissolved nitrate and silica were transported from the watershed during the winter months of greater rainfall, indicating that seasonality and river flow are primary factors when considering nutrient loadings from this watershed system.     

非常规管节点疲劳寿命分析与计算

对非常规管节点的疲劳寿命进行了分析研究，用SESAM计算疲劳载荷，应用精细有限元分析计算热点应力，用规范的S—N曲线计算管节点的疲劳寿命。通过实例计算表明，这些处理对非常规管节点疲劳寿命分析与计算是很有效的。     

耿贝尔逻辑模型在极值风速和有效波高联合概率分布中的应用

首先介绍了耿贝尔逻辑模型，采用该模型对南海海域的涠州岛海洋站的风速和有效波高实测数据进行了分析，结果表明耿贝尔逻辑模型较好地描述了年极值风速和有效波高两随机变量的联合分布；采用得到的极值风浪联合概率分布推算了不同重现期的极值风速和波高，表明考虑风速和波高相关性对设计荷载的确定有显著影响。由于耿贝尔逻辑模型具有函数结构简单，参数估计方便，因此有望成为极值风速和波高联合分布的较理想概率模型。     

Analysis of seabed instability using element free Galerkin method

Wave-induced seabed instability, either momentary liquefaction or shear failure, is an important topic in ocean and coastal engineering. Many factors, such as seabed properties and wave parameters, affect the seabed instability. A non-dimensional parameter is proposed in this paper to evaluate the occurrence of momentary liquefaction. This parameter includes the properties of the soil and the wave. The determination of the wave-induced liquefaction depth is also suggested based on this non-dimensional parameter. As an example, a two-dimensional seabed with finite thickness is numerically treated with the EFGM meshless method developed early for wave-induced seabed responses. Parametric study is carried out to investigate the effect of wavelength, compressibility of pore fluid, permeability and stiffness of porous media, and variable stiffness with depth on the seabed response with three criteria for liquefaction. It is found that this non-dimensional parameter is a good index for identifying the momentary liquefaction qualitatively, and the criterion of liquefaction with seepage force can be used to predict the deepest liquefaction depth.     

Protracted Environmental Issues on a Proposed Titanium Minerals Development in Kenya's South Coast

This study takes cognizance of the fact that the TIOMIN (TIOMIN Resources Inc. of Canada) project has resulted in controversy over its handling of environmental issues and especially the Environmental Impact Assessment (EIA). The authors address many of the protracted issues that have slowed the development of the mining project in Kwale. The main emphasis is on the impacts of the mining and mineral separation processes on the environment, including the governing legislation, the role of consultation and public participation, and socioeconomic issues. In their public documents TIOMIN has specified neither the type of minerals it wants to extract from the area nor their chemical composition. It is well known, however that the titanium minerals and zircon targeted have impurities of iron, thorium and uranium. In the absence of an Environmental Management Plan, the effects of stockpiling radioactive wastes and other impurities that could possibly lead to environmental degradation in both the terrestrial and marine environments have not been publically addressed. The measures proposed to mitigate ecological damage as a result of the establishment of a minerals processing plant in the area seem inadequate. Pollution resulting from accidental spillage or breakage could have significant impact on marine life and residents living near the mining site. Other issues that have not been addressed satisfactorily pertain to the use of surface and underground water. The area already faces a huge water deficit and the calculations presented on aquifer recharge and stream flow rates do not indicate the large quantities of water that would be required in the mineral processing plant. The project, if approved in its present state, risks violation of international conventions. Furthermore, it could cause a conflict between Kenya and Tanzania in the event of an oil spill at the proposed ship loading facility at Shimoni. The proposed mining area includes the district's most fertile land, is home to many fisherfolk and is a major tourist destination. An analysis of the effects of this project on other available opportunities must be thoroughly understood to ascertain the economic and environmental benefits and costs of the mining venture. The proposed compensation rate of $1,000 per acre, for resettlement for example, appears to be grossly inadequate. Compensation should take into account family size and structure family assets and the cost of relocation.     

Baroclinic Buoyancy-Inertia Joint Stability Parameter

At present, the barotropic buoyant stability parameter has been derived from a vertical virtual displacement of a water parcel. The barotropic inertial stability parameter in the eccentrically cyclogeostrophic, basic current field was derived in 2003 from a horizontal cross-stream virtual displacement of a parcel. By expressing acceleration of a parcel due to a virtual displacement, which is arbitrarily sloping within a vertical section across the basic current, in terms of natural coordinates, we derived the vertical component of baroclinic buoyant stability parameter B ₂ ², the horizontal component of baroclinic inertial stability parameter I ₂ ², the baroclinic joint stability parameter J ², its buoyant component B ² and its inertial component I ². B ² is far greater than I ₂ ², and when neglecting relative vorticity except for vertical shear, a downward convex curve of J ² plotted against the slope of a virtual displacement follows a trend of B ² curve. If a parcel displaces along a horizontal surface or an isopycnal surface, however, B ² vanishes, and J ² becomes equal to I ². Actual parcel is apt to displace not only along the bottom slope, but also along the sea surface and an isopycnal interfacial surface, which is approximately equivalent to an isentropic surface, preferred by lateral mixing and exchange of momentum. Such actual displacement makes B ² vanishing, and grants I ² an important role. The present analysis of I ² examining effects due to curvature and horizontal and vertical shear vorticities are useful in deepening our understanding of baroclinic instability in actual oceanic streams.     

Ocean tide loading (OTL) displacements from global and local grids: comparisons to GPS estimates over the shelf of Brittany, France

In this paper we examine OTL displacements detected by GPS stations of a dedicated campaign and validate ocean tide models. Our area of study is the continental shelf of Brittany and Cotentin in France. Brittany is one of the few places in the world where tides provoke loading displacements of ∼10–12 cm vertically and a few cm horizontally. Ocean tide models suffer from important discrepancies in this region. Seven global and regional ocean tide models were tested: FES2004 corrected for K2, TPXO.7.0, TPXO.6.2, GOT00.2, CSR4.0, NAO.99b and the most recent regional grids of the North East Atlantic (NEA2004). These gridded amplitudes and phases of ocean tides were convolved in order to get the predicted OTL displacements using two different algorithms. Data over a period of 3.5 months of 8 GPS campaign stations located on the north coast of Brittany are used, in order to evaluate the geographical distribution of the OTL effect. We have modified and implemented new algorithms in our GPS software, GINS 7.1. GPS OTL constituents are estimated based on 1-day batch solutions. We compare the observed GPS OTL constituents of M₂, S₂, N₂ and K₁ waves with the selected ocean tide models on global and regional grids. Large phase-lag and amplitude discrepancies over 20° and 1.5 cm in the vertical direction in the semi-diurnal band of M₂ between predictions and GPS/models are detected in the Bay of Mont St-Michel. From a least squares spectral analysis of the GPS time-series, significant harmonic peaks in the integer multiples of the orbital periods of the GPS satellites are observed, indicating the existence of multipath effects in the GPS OTL constituents. The GPS OTL observations agree best with FES2004, NEA2004, GOT00.2 and CSR4.0 tide models.     

江西省永平铜矿西部排土场极限堆载高度确定

国内外对排土场极限堆载高度的理论计算缺乏研究,目前尚无成熟的统一理论计算方法。文章结合永平铜矿西部排土场的工程实例,在进行边坡工程地质条件勘察与排土场岩土物理力学性质试验研究的基础上,采用数值计算方法对排土场进行了分层堆载数值模拟计算。通过对计算结果的分析,得到位移、塑性区与安全系数随堆载高度的变化规律,并确定了该排土场的极限堆载高度。     

World-wide synthetic tide parameters for gravity and vertical and horizontal displacements

The response of the Earth’s crust to the direct effect of lunisolar gravitational forcing is known as the body tide. The body tide is superimposed by surface-loading forces due to the pressure of the periodically varying ocean tide acting on the Earth, called ocean tide loading (OTL). Both body tide and OTL can be decomposed into components of the same frequency known as tidal parameters. However, OTL is more complicated than body tides because of the dynamic effects of the ocean. Estimating OTL requires a model of the ocean tides and knowledge of the elastic properties of the solid Earth. Thus, synthetic tide parameters (amplitude factors and phase leads) have been developed here on a world-wide grid for gravity and positional displacements. The body tide contributions were added to the oceanic contribution to provide the Earth tide response. The accuracy and reliability of the synthetic tidal parameters have been estimated by comparing observed gravity and vertical-displacement tide parameters with those interpolated from our synthetic model, which shows good agreement. Tests also indicate that the synthetic tide parameters provide realistic gravimetric and displacements for practical use in tidal prediction.