伸缩缝刚度对大跨度悬索桥动力特性的影响

伸缩缝作为大跨度桥梁与引桥之间的重要连接构件,其抗推刚度及可能存在的变异性对主桥及引桥动力特性的影响不可忽略。本文建立了大跨度悬索桥及引桥的有限元模型,采用弹簧单元模拟加劲梁与引桥箱梁之间的伸缩缝,分析伸缩缝刚度对悬索桥及引桥自振特性及其地震响应的影响规律。分析结果表明:伸缩缝刚度对加劲梁的横弯振型、竖弯与纵飘耦合振型的频率有明显的影响;伸缩缝刚度的变化会导致加劲梁与引桥的振型相互耦合,同时这些振型的频率发生相应的突变,当伸缩缝刚度较大时,加劲梁两个竖弯与纵飘的耦合振型解耦成为独立的竖弯和纵飘振型;当引桥与悬索桥加劲梁的纵飘振型发生耦合时,在纵向和竖向地震作用下的悬索桥及引桥的地震响应达到最小。伸缩缝刚度对悬索桥动力特性影响的分析可为悬索桥的模态参数确认、损伤识别、抗震性能分析提供有价值的借鉴。     

Surficial fractures in the Navajo sandstone,south-western USA: the roles of thermal cycles,rainstorms, granular disintegration,and iterative cracking

Deep (> 5 m) sheeting fractures in the Navajo sandstone are evident at numerous sites in southern Utah and derive from tectonic stresses. Strong diurnal thermal cycles are, however, the likely triggers for shallow (< 0.3 m) sheeting fractures. Data from subsurface thermal sensors reveal that large temperature differences between sensors at 2 and 15 cm depth on clear summer afternoons are as great as those that trigger sheeting fractures in exposed California granite. Extensive polygonal patterns in the Navajo sandstone are composed of surface-perpendicular fractures and were produced by contractile stresses. Numerous studies have shown that porewater diminishes the tensile strength of sandstone. Based on our thermal records, we propose that cooling during monsoonal rainstorms triggers polygonal fracturing of temporarily weakened rock. On steep outcrops, polygonal patterns are rectilinear and orthogonal, with T-vertices. Lower-angle slopes host hexagonal patterns (defined by the dominance of Y-vertices). Intermediate patterns with rectangles and hexagons of similar scale are common. We posit that outcropping fractures are advancing downward by iterative steps, and that hexagons on sandstone surfaces (like prismatic columns of basalt) have evolved from ancestral orthogonal polygons of similar scale. In lava flows, fractures elongate intermittently as they follow a steep thermal gradient (the source of stress) as it rapidly moves through the rock mass. In our model, a steep, surficial thermal gradient descends through unfractured sandstone, but at the slow pace of granular disintegration. Through time, as the friable rock on stable slopes erodes, iterative cracking advances into new space. Hexagonal patterns form as new fractures, imperfectly guided by the older ones, propagate in new directions, and vertices drift into a configuration that minimizes the ratio of fracture length to polygon area. © 2020 John Wiley & Sons, Ltd.     

Tomographic determination of 3-D crustal structure — Joint inversion of explosion and earthquake data

In this paper, the theory and method, obtaining the tomographic determination of three-dimensional velocity structure of the crust by use of the joint inversion of explosion and earthquake data, are given. The velocity distribution of the crust is regarded as a continuous function of the spatial coordinates without parametrization of the velocity model ahead, so that the inversion solution would not be influenced by different parametrization procedures. The expressions of integration kernels, which relates the two kinds of data sets, are also given. The authors have processed the observed data in Tangshan earthquake region by the method proposed in this paper, and obtained the tomographic results of the middle and upper crust structures in this region. The comparison of these results with the result obtained only by the explosion data, has also been made.     

中国探月工程

嫦娥五号（Change’E-5, CE-5）着上组合体与上升器先后成功着陆于月面。两探测器承担的任务不同,着陆方式不同,因此月面位置解算方法不同。联合统一X波段（united X-band,UXB）深空测距站及甚长基线干涉测量技术（very long baseline interferometry,VLBI）的测量数据计算两者的月面位置。采用联合统计定位方法得到CE-5着上组合体的月面位置。讨论分别基于数传与侧音差分单向测距（differential one-way ranging,DOR）两种信号对月面位置的影响。观测资料的时间跨度在一定程度上影响定位结果。采用多项式拟合的运动学统计定轨方法归算了上升器受控落月轨迹及落月位置,并与单点定位结果符合在40 m内。根据相关处理机最后输出时刻推算得到精确至ms的上升器的落月时刻。

     

福建省海岸基岩节理的分形性质及其与宏观断裂系的关系

该文以福建省福州市海岸基岩为例，通过野外实地勘测与室内分析相结合的研究方法，探讨了海岸基岩节理的分形性质及其与福建省宏观断裂系的相互关系。得到的基本结论为：第一，研究区节理与宏观断裂系的分形性质是客观存在的；第二，研究区节理与宏观断裂系在方向上存在着一定的响应关系；第三，研究区10^-2～10^-1m尺度的节理与福建省10^3～10^4m尺寸的断裂系存在一定的相似性。     

运营期水下盾构隧道管片接缝张开度变化规律

水下盾构隧道管片间接缝张开度对隧道防水及运营期结构安全有重要影响。以南京扬子江隧道结构健康监测系统中两个典型监测断面的接缝监测数据为基础,通过多元线性回归分析方法分析在两种不同地层组合下接缝张开度随水位、温度变化的规律;并对接缝张开度随水位变化的规律进行了有限元数值模拟,数值模拟结果与回归分析结果吻合较好。上述分析结果表明,纵缝张开度和横缝张开度随水位、温度的变化均呈现较好的线性关系,具体变化趋势如下：当盾构隧道穿越上砂下岩的上透下不透地层时,环内上半部分管片纵缝张开度随水位的增大而增大,受温度影响则相对较小;当盾构隧道穿越砂性全透水地层时,环内管片纵缝张开度随水位的增大而减小,受温度影响也相对较小;环间横缝张开度在上述两种地层下随水位、温度的变化趋势相同,均随水位增大而增大,随温度的升高而减小。     

Numerical evaluation of soft inter‐slab joint in concrete‐faced rockfill dam with dual mortar finite element method

Recently constructed concrete‐faced rockfill dams (CFRDs) often use soft inter‐slab joints to prevent axial compression‐induced extrusion damage in the concrete face. Due to the complexity of the multibody contact and the lack of information on the actual behavior of soft joints, it is highly challenging to numerically assess the effect of soft joints in CFRDs. In this paper, we present a numerical approach for the three‐dimensional modeling of CFRDs with hard and soft joints. A dual mortar finite element method with Lagrange multiplier is developed to treat the multibody contact in hard joints with impenetrability condition. The soft joint slab‐filler‐slab contact system is modeled using an equivalent contact interface approach, where the soft contact constraints are imposed using a perturbed Lagrange formulation. Through a series of laboratory tests, the mechanical behavior of soft joint is investigated. An extrusion model for the soft joint is presented and implemented in the dual mortar finite element method. The proposed numerical method is applied to the three‐dimensional analysis of Tianshengqiao‐1 CFRD. Despite the complex multibody contact and strong material and geometry nonlinearities in the CFRD, the proposed method is stable and capable of capturing salient characteristics of the CFRD. Numerical results show that in Tianshengqiao‐1, the employment of soft joints can effectively reduce the axial compression stress, thus greatly alleviating the risk of extrusion damage in the concrete face.     

Statistical models for shear strength of RC beam‐column joints using machine‐learning techniques

This paper proposes a new set of probabilistic joint shear strength models using the conventional multiple linear regression method, and advanced machine‐learning methods of multivariate adaptive regression splines (MARS) and symbolic regression (SR). In order to achieve high‐fidelity regression models with reduced model errors and bias, this study constructs extensive experimental databases for reinforced and unreinforced concrete joints by collecting existing beam‐column joint subassemblage tests from multiple sources. Various influential parameters that affect joint shear strength such as material properties, design parameters, and joint configuration are investigated through tests of statistical significance. After performing a set of regression analyses, the comparison of simulation results indicates that MARS approach is the best estimation method. Moreover, the accuracy of analytical predictions of the derived MARS model is compared with that of existing joint shear strength relationships. The comparison results show that the proposed model is more accurate compared to existing relationships. This joint shear strength prediction model can be readily implemented into joint response models for evaluation of earthquake performance and inelastic responses of building frames. Copyright © 2014 John Wiley & Sons, Ltd.     

盾构隧道局部长期渗水对隧道变形及地表沉降的影响分析

研究表明,盾构隧道长期渗水会造成地表及隧道严重沉降。针对盾构隧道局部渗流难以模拟的现状,首先提出了一种既符合盾构隧道刚度要求又能实现局部接头渗水的计算方法;在稳定渗流状态对应的相同渗流量的前提下,对比分析了管片在不同接头渗水条件下隧道周围土体孔压分布、地表和隧道沉降以及隧道变形规律。分析结果表明,盾构隧道渗水接头的位置不同,孔压分布、地表和隧道沉降以及隧道的变形均有明显差异;接头位置越靠近隧道底部,渗水导致的孔压减小越显著,造成的地表及隧道沉降越显著。接头渗水不但会使隧道发生横向椭圆化变形,还会引起隧道左右两侧受力不平衡,从而造成隧道水平侧移。通过对比表明,采用接头渗水和传统的衬砌均质渗水得到的孔压分布、沉降及隧道变形规律均有显著不同;不考虑隧道局部渗水特点会对隧道结构长期性态的认识产生偏差。     

Preliminary investigations on Arctic microalgae by joint aDDlication of fluorescent instruments

In vivo fluorescence has a wide application in analyzing microalgae, including assessing phytoplankton biomass, rates of primary production and physiological status. This study describes a preliminary investigation on the joint application of the three kinds of fluorescence analysis in the physiological study of microalgae. Flow cytometry and fluorescence spectrometry were used to obtain the in vivo static fluorescence information of pigments, and a Pulsed-Amplitude-Modulation chlorophyll fluorometer was used to detect the dynamic fluorescence of chlorophyll. The validity of the joint application was proved by analyzing two labora- tory cultured Arctic microalgae, Pseudo-nitzschia delicatissima （Bacillariophyceae） and Thalassiosira sp. The higher value of minimum fluorescence yield in dark-adapted state （Fo）, actual photochemical efficiency of PSll （ФPSII）, and electron transport rate （ETR） exhibited positive results in a higher cell abundance and chlorophyll a content of P. delicatissima; whereas higher fl-carotene content of Thalassiosira sp. played an important role in the protection of photosynthesis.