Appraisal of a new 1D weighted joint inversion of ground based and helicopter‐borne electromagnetic data

In order to couple spatial data from frequency‐domain helicopter‐borne electromagnetics with electromagnetic measurements from ground geophysics (transient electromagnetics and radiomagnetotellurics), a common 1D weighted joint inversion algorithm for helicopter‐borne electromagnetics, transient electromagnetics and radiomagnetotellurics data has been developed. The depth of investigation of helicopter‐borne electromagnetics data is rather limited compared to time‐domain electromagnetics sounding methods on the ground. In order to improve the accuracy of model parameters of shallow depth as well as of greater depth, the helicopter‐borne electromagnetics, transient electromagnetics, and radiomagnetotellurics measurements can be combined by using a joint inversion methodology. The 1D joint inversion algorithm is tested for synthetic data of helicopter‐borne electromagnetics, transient electromagnetics and radiomagnetotellurics. The proposed concept of the joint inversion takes advantage of each method, thus providing the capability to resolve near surface (radiomagnetotellurics) and deeper electrical conductivity structures (transient electromagnetics) in combination with valuable spatial information (helicopter‐borne electromagnetics). Furthermore, the joint inversion has been applied on the field data (helicopter‐borne electromagnetics and transient electromagnetics) measured in the Cuxhaven area, Germany. In order to avoid the lessening of the resolution capacities of one data type, and thus balancing the use of inherent and ideally complementary information content, a parameter reweighting scheme that is based on the exploration depth ranges of the specific methods is proposed. A comparison of the conventional joint inversion algorithm, proposed by Jupp and Vozoff ( 1975 ), and of the newly developed algorithm is presented. The new algorithm employs the weighting on different model parameters differently. It is inferred from the synthetic and field data examples that the weighted joint inversion is more successful in explaining the subsurface than the classical joint inversion approach. In addition to this, the data fittings in weighted joint inversion are also improved.     

航空矢量重力测量水平分量的带限直接地形影响

基于第二类Helmert凝聚法的级数展开式,独立推导了航空矢量重力测量水平分量带限直接地形影响的计算公式。在中国西部山区选取了两条沿纬圈方向4000m航线高度上的航线,采用 的数字高程模型基于解析核计算了水平分量的直接地形影响,经低通滤波后与基于带限公式计算的地形影响进行了比较。数值计算结果表明,二者吻合较好,本文给出的带限地形影响公式可用于航空矢量重力测量水平分量的地形归算。     

中国太阳能热发电站选址模型研究

太阳能热发电技术在我国新世纪能源战略中具有重要地位,太阳能热发电电站位置的合理选择对发电成本有直接影响,涉及到太阳能热发电技术本身、高时空分辨率的太阳能法直辐射分布、土地利用分布、水资源分布、社会经济分布,以及政策税收等众多因素。本文提出了一个太阳能热发电站选址的决策支持系统框架,就其中的太阳能直法辐射调查进行了初步试验。本文依据供需时空平衡原则进一步讨论了多种绿色能源互补的大能源系统运筹问题。     

超声波测风仪设计中几个问题的探讨

通过比较Gill仪器的Winsonic 2D测风仪和螺旋浆式风速风向计05103L的实测效果,分析了超声波测风仪测风的特点.进而分析了几种超声波测风的检测机理、系统组成和设计的注意事项;同时探讨了如何解决超声波测风仪目前使用中存在的一些问题(如:全天候使用、环境影响补偿等).最后讨论了超声波的传输特性和大气中的杂质对风速、风向测量的影响.     

非贯通类节理岩体剪切变形规律分析

通过直剪条件下的模型试验研究具有相同连通率、含不同起伏角的共面闭合节理在不同法向应力作用下的剪切变形特征。试验结果表明：在达到峰值剪切强度前,剪切应力-位移曲线具有明显的线性段与非线性段;岩桥在法向与剪切荷载的共同作用下会产生一定程度的弱化,积累到一定程度时宏观表现为剪切应力软化。详细阐述了试验过程中裂纹发展的4个阶段并描述了剪切应力-剪切变形曲线变化的特征,提出一个能反映剪切应力-剪切变形曲线全过程的经验本构模型。新模型采用分段函数描述曲线变化特征。直剪试验数据分析表明,该模型能够拟合剪切应力-剪切变形变化发展趋势且具有较高的拟合精度,验证了模型的正确性。最后,对其存在的不足亦进行了简要分析     

变形岩体软弱破裂带的处理技术

在研究完成变形岩体软弱破裂带可灌性的基础上,采用旋喷注浆技术进行直接加固处理,提高破裂带的内聚力和内摩擦角,实践证明,抑制了岩体的变表,防止了滑坡的产生。     

Simulation of the direct runoff hydrograph at basin outlet

A simple model describing the transformation of effective rainfall to direct runoff through the overland flow mechanism is presented. The model is based on the classical representation of a watershed by a combination of planes and channels. The dynamics of overland flow in each plane is simulated by the non-linear kinematic wave, but the outflow from a given plane is concentrated in the middle of the corresponding drainage channel. The water routing in the channels is carried out by a piece-wise linearized formulation in space of the kinematic wave approximation. Using synthetic events on 10 watersheds, the model was tested by comparing it with results obtained by applying the non-linear kinematic wave to all the elements of the watershed. The model was found to be adequate, even in a form that simplifies the geometric features of the planes through an averaging procedure based on the Horton–Strahler ordering scheme of the watershed. © 1998 John Wiley & Sons, Ltd.     

ISD单片语音录/放器件及电路设计

指出ＩＳＤ单片语言器件的独特之处，是采用直接模拟存储技术，语音信号以其原本的模拟形式直接存入模拟量存储器中并长远保存。省去了传统的Ａ／Ｄ和Ｄ／Ａ数模转换机制，能高保真的将语音内容再生。这是一种高新录／放技术。另外，给出的ＩＳＤ基本录／放电路十分简单易用。可方便地为微机系统、测控仪表电器和广播等设备所采用，使设备具有高效功能     

琼州海峡海口站近岸风暴增水概率风险分析

基于海口站1976~1997年逐时潮位和逐日最大风速资料,利用阿基米德Copula函数构建海口年最大增水与相应日期最大风速的联合概率分布模型。结果表明:1)广义极值分布可作为海口站年最大增水和相应日期最大风速的边缘分布。两个序列之间存在强正相关关系,G-H Copula函数更适用于作为海口站年最大增水和相应日期的最大风速联合概率分布的连接函数。2)两变量联合作用的同频率增水高度设计值与增水的单变量边缘分布设计值之间的相对差值约为7.5%。3)条件概率1(P(Y≥y|X≥x))中同频率的年最大增水和相应风速的遭遇概率介于78.2%~80.9%,条件概率2(P(Y≥y|X≤x))中同频率的年最大增水和相应风速两者的遭遇概率小于4.8%。     

副溶血弧菌tdh基因在毕赤酵母中的表达及溶血活性检测

通过PCR技术从副溶血弧菌(Vibrio Parahaemolyticus,VP)基因组DNA上扩增耐热溶血素基因tdh,双酶切后定向插入到酵母表达载体pPICZaA中,构建重组表达质粒pPICZaA-tdh,经限制性内切酶SacI线性化后电转化毕赤酵母(Pichia pastoris,P.pastoris)GS115,经PCR和测序鉴定耐热溶血素基因成功整合到毕赤酵母的基因组中。在甲醇诱导下进行tdh的表达,SDS-PAGE分析证明重组TDH(thermostable direct hemolysin,TDH)的分子质量约为23ku,经Western blotting鉴定VP抗体能与表达的TDH发生特异反应,说明tdh基因在毕赤酵母中的表达是准确的。溶血实验证明了表达的TDH具有溶血活性。本研究首次应用毕赤酵母表达耐热溶血素基因tdh,在培养基中获得分泌表达的耐热溶血素,为研究tdh基因的功能奠定了基础。