一种测定非饱和土-水力学参数的方法

详细介绍了非饱和土-水力学参数联合测试系统,该系统分别利用轴平移技术和达西定律测定非饱和土土-水特征曲线和水相渗透系数。通过试验结果对比可以发现,由联合测试系统确定土-水特征曲线与压力板仪溢出水校正称量法确定的土-水特征曲线接近,但由联合测试系统确定的试样残余含水率比使用压力板仪溢出水校正称量法确定的试样含水率要小;由联合测试系统确定的渗透函数,当饱和度较大时,实测值与模型预测值较为接近;当饱和度较小时,实测值与模型预测值相差较大。     

1835-2017年广州主城区建筑高度的结构及其演变

根据数据源的特点,采取不同的技术路线,分别解译恢复了 1835-2017年6个时期大比例尺广州主城区的用地类型和建筑高度.围绕建筑高度空间分异、高度重心迁移和建筑高度的抬升,分析1835年以来广州主城区建筑高度的演变.研究表明:①1835-1907年属于王权主导下的围城结构,高度4～5 m,中心与外围差异不大.②192...     

论岛弧的拱结构

基于海沟－岛弧－弧后盆地体系起伏变化的地壳厚度和岛弧平面上独特的延展方式，从结构力学上看，岛弧实质上是横跨于汇聚板块边界上的二铰拱，弧体及两端支点的地质构造特点都说明了这一点。板块俯冲边界上作用力的方式和方向相当于作用在二铰拱上的竖向均布载荷，因而岛弧选择的合理拱轴为抛物线。为了保持汇聚板块边界的平衡，岛弧呈抛物线形向外扩展，引起弧后盆地向岛弧一侧的扩张，这与大洋中脊的扩张有本质的不同。     

Estimating the Kuroshio Axis South of Japan Using Combination of Satellite Altimetry and Drifting Buoys

By tracking the locally strongest part of the sea-surface velocity field, which was obtained by integrating data of satellite altimeters and surface drifting buoys, we extracted the Kuroshio axis south of Japan every 10 days from October 1992 to December 2000. The obtained axes clearly express the effect of the bottom topography; three modes were observed when the Kuroshio ran over the Izu Ridge. The axis was very stable to the south of ‘Tosa-bae,’ off the Kii Channel. Mean current speed at the Kuroshio axis gradually increased from 0.65 m/s south of Kyushu to 1.45 m/s off Enshu-nada. This revised version was published online in July 2006 with corrections to the Cover Date.     

论多边形中轴问题和算法

比较了当前国内外GIS中和计算几何中关于多边形中轴的定义,讨论了它们的主要特点,指出多边形中轴应是到两个以上边距离相等点的轨迹,并据此分析了相应的各种算法和实际应用场合,提出了理论上较为严密、能够广泛满足实际应用需要的几何方法———点对序列法和地图代数多边形中轴法。     

工业自动化生产线轴线检测及精度分析

工业自动化生产线上的感应滚筒是进行产品厚度快速自动检测的重要设备，特别是对于不锈钢冷轧生产线尤其重要，它直接决定着不锈钢板的加工精度，从而影响产品的质量。对于冷轧前后的两个感应滚筒厂方要求其轴线垂直于轧机纵轴线的偏差小于0.08mm，采用常规的测量仪器，运用特殊的精密工程测量手段，成功地实现对轴线检测与调整，经过对产品的检验达到了厂方提出的精度要求。     

Comparative Study of Nucleation by Different Alcoholic Solutions of Benzoin, and Benzoin Dust

Nucleation properties of different alcoholic solutions of Benzoin and Benzoin dust have been studied by varying the seeding temperature in a laboratory Cold Chamber. In the present study, three different alcoholic solutions are being used and these are due to the standard Ethyl alcohol, one higher alcohol i.e. Isopropyle alcohol and one lower alcohol i.e. Methyl alcohol. In addition, Benzil dust and droplets of Acetone and Chloroform have been used to examine if these agents have any ice nucleation ability. It has been observed that all alcoholic solutions of Benzoin have sufficient ice nucleation ability at the negative side of 0^°C, with the maximum concentration occurring at −14.4^°C. In case of Benzoin dust, the nucleation ability is better on the positive side of 0^°C than the negative side. On the other hand, Benzil dust has insignificant nucleation ability and the droplets of two other agents have no nucleation ability at all.Considering the chemical as well as crystalline structure, one can conclude that the presence of OH group in the seeding molecule plays the central role in ice nucleation/hydrate crystal formation. In fact, a number of supplementary experiments like crystal growth in an incubator, XRD analysis and NMR study are performed to identify the nature of crystals formed by Benzoin dust above 0^°C. One can conclude that these are hydrate crystals of Benzoin with water caging around Benzoin crystals.     

Elastic wave mode separation for tilted transverse isotropy media

Seismic waves propagate through the earth as a superposition of different wave modes. Seismic imaging in areas characterized by complex geology requires techniques based on accurate reconstruction of the seismic wavefields. A crucial component of the methods in this category, collectively known as wave‐equation migration, is the imaging condition that extracts information about the discontinuities of physical properties from the reconstructed wavefields at every location in space. Conventional acoustic migration techniques image a scalar wavefield representing the P‐wave mode, in contrast to elastic migration techniques, which image a vector wavefield representing both the P‐ and S‐waves. For elastic imaging, it is desirable that the reconstructed vector fields are decomposed into pure wave modes, such that the imaging condition produces interpretable images, characterizing, for example, PP or PS reflectivity. In anisotropic media, wave mode separation can be achieved by projection of the reconstructed vector fields on the polarization vectors characterizing various wave modes. For heterogeneous media, because polarization directions change with position, wave mode separation needs to be implemented using space‐domain filters. For transversely isotropic media with a tilted symmetry axis, the polarization vectors depend on the elastic material parameters, including the tilt angles. Using these parameters, we separate the wave modes by constructing nine filters corresponding to the nine Cartesian components of the three polarization directions at every grid point. Since the S polarization vectors in transverse isotropic media are not defined in the singular directions, e.g., along the symmetry axes, we construct these vectors by exploiting the orthogonality between the SV and SH polarization vectors, as well as their orthogonality with the P polarization vector. This procedure allows one to separate all three modes, with better preserved P‐wave amplitudes than S‐wave amplitudes. Realistic synthetic examples show that this wave mode separation is effective for both 2D and 3D models with strong heterogeneity and anisotropy.     

Flow dynamics inside the rotor of a three straight bladed cross-flow turbine

In this work we study experimentally the flow dynamics inside the rotor of a three straight-bladed Cross-Flow Turbine (CFT). The CFT model used in the experiments is based on symmetric NACA-0015 profiles, with a chord to rotor diameter ratio of 0.16. The turbine model was designed in order to quantify the flow inside and around the rotor using planar Digital Particle Image Velocimetry (DPIV). Tests were made by forcing the rotation of the turbine with a DC motor, which provided precise control of the Tip Speed Ratio (TSR), while being towed in a still-water tank at a constant turbine diameter Reynolds number of 6.1 × 10⁴. The range of TSRs covered in the experiments went from 0.7 to 2.3.The focus is given to the analysis of the blade-wake interactions inside the rotor. The investigation has allowed us to relate the interactions with the performance differences in this type of turbines, as a function of the operational tip speed ratio.     

潮流能水轮机仿真及尾流场分析

为了研究潮流能水轮机尾流场的变化规律,本文在水平轴水轮机现有理论基础上,采用计算流体力学技术建立了数值模型,计算了水轮机的功率特性,进行了网格独立性验证,比较了模型中旋转区域不同对结果的影响。仿真结果与试验结果进行了对比分析,验证了数值模型的有效性。研究了全工况下尾流场速度衰减随尖速比和距离变化的规律,结果显示在小尖速比下尾流场速度恢复情况相对大尖速比下较好;靠近水轮机轮毂中心线位置处,衰减相对较大。研究建议水轮机在同等功率表现下尽量选择在小尖速比下工作,水轮机组在实际排列时避免采用成列布置,水轮机设计阶段应综合考虑功率特性和尾流场衰减。本文研究内容可以为潮流能水轮机的研究以及阵列式应用提供参考。